kernel/linux.git/drivers/base, branch v4.14.12

drivers: base: cacheinfo: fix cache type for non-architected system cache

2018-01-02T19:31:16+00:00

commit f57ab9a01a36ef3454333251cc57e3a9948b17bf upstream. Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

PM / OPP: Move error message to debug level

2017-12-25T13:26:26+00:00

[ Upstream commit 035ed07208dc501d023873447113f3f178592156 ] On some i.MX6 platforms which do not have speed grading check, opp table will not be created in platform code, so cpufreq driver prints the following error message: cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) However, this is not really an error in this case because the imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count() and if it fails, it means that platform code does not provide OPP and then dev_pm_opp_of_add_table() will be called. In order to avoid such confusing error message, move it to debug level. It is up to the caller of dev_pm_opp_get_opp_count() to check its return value and decide if it will print an error or not. Signed-off-by: Fabio Estevam Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

isa: Prevent NULL dereference in isa_bus driver callbacks

2017-12-14T08:52:51+00:00

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream. The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus") Signed-off-by: William Breathitt Gray Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

firmware: cleanup FIRMWARE_IN_KERNEL message

2017-12-14T08:52:50+00:00

commit 0946b2fb38fdb6585a5ac3ca84ac73924f645952 upstream. The help for FIRMWARE_IN_KERNEL still references the firmware_install command that was recently removed by commit 5620a0d1aacd ("firmware: delete in-kernel firmware"). Clean up the message to direct the user to their distribution's linux-firmware package, and remove any reference to firmware being included in the kernel source tree. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware"). Cc: Masahiro Yamada Cc: David Woodhouse Signed-off-by: Robin H. Johnson Signed-off-by: Greg Kroah-Hartman

PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()

2017-12-10T12:40:38+00:00

[ Upstream commit 5241ab40f6e742f8a1631f8826faf6dc6412b3b5 ] During system-wide PM, genpd relies on its PM callbacks to be invoked for all its attached devices, as to deal with powering off/on the PM domain. In other words, genpd is not compatible with the direct_complete path, if executed by the PM core for any of its attached devices. However, when genpd's ->prepare() callback invokes pm_generic_prepare(), it does not take into account that it may return 1. Instead it treats that as an error internally and expects the PM core to abort the prepare phase and roll back. This leads to genpd not properly powering on/off the PM domain, because its internal counters gets wrongly balanced. To fix the behaviour, allow drivers to return 1 from their ->prepare() callbacks, but let's return 0 from genpd's ->prepare() callback in such case, as that prevents the PM core from running the direct_complete path for the device. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

PM / OPP: Add missing of_node_put(np)

2017-11-30T08:40:41+00:00

commit 7978db344719dab1e56d05e6fc04aaaddcde0a5e upstream. The for_each_available_child_of_node() loop in _of_add_opp_table_v2() doesn't drop the reference to "np" on errors. Fix that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Tobias Jordan [ VK: Improved commit log. ] Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm: only display online cpus of the numa node

2017-10-13T23:18:32+00:00

When I execute numactl -H (which reads /sys/devices/system/node/nodeX/cpumap and displays cpumask_of_node for each node), I get different result on X86 and arm64. For each numa node, the former only displayed online CPUs, and the latter displayed all possible CPUs. Unfortunately, both Linux documentation and numactl manual have not described it clear. I sent a mail to ask for help, and Michal Hocko replied that he preferred to print online cpus because it doesn't really make much sense to bind anything on offline nodes. Will said: "I suspect the vast majority (if not all) code that reads this file was developed for x86, so having the same behaviour for arm64 sounds like something we should do ASAP before people try to special case with things like #ifdef __aarch64__. I'd rather have this in 4.14 if possible." Link: http://lkml.kernel.org/r/1506678805-15392-2-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Will Deacon Cc: Greg Kroah-Hartman Cc: Tianhong Ding Cc: Hanjun Guo Cc: Libin Cc: Kefeng Wang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ACPI: properties: Align return codes of __acpi_node_get_property_reference()

2017-10-11T19:15:44+00:00

acpi_fwnode_get_reference_args(), the function implementing ACPI support for fwnode_property_get_reference_args(), returns directly error codes from __acpi_node_get_property_reference(). The latter uses different error codes than the OF implementation. In particular, the OF implementation uses -ENOENT to indicate that the property is not found, a reference entry is empty and there are no more references. Document and align the error codes for property for fwnode_property_get_reference_args() so that they match with of_parse_phandle_with_args(). Fixes: 3e3119d3088f (device property: Introduce fwnode_property_get_reference_args) Signed-off-by: Sakari Ailus Signed-off-by: Rafael J. Wysocki

device property: Track owner device of device property

2017-10-10T02:09:45+00:00

Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ # 4.9+ Signed-off-by: Jarkko Nikula Signed-off-by: Rafael J. Wysocki