kernel/linux.git/drivers/base/power, branch v6.7.3

rtc: Extend timeout for waiting for UIP to clear to 1s

2024-02-01T00:21:02+00:00

commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream. Specs don't say anything about UIP being cleared within 10ms. They only say that UIP won't occur for another 244uS. If a long NMI occurs while UIP is still updating it might not be possible to get valid data in 10ms. This has been observed in the wild that around s2idle some calls can take up to 480ms before UIP is clear. Adjust callers from outside an interrupt context to wait for up to a 1s instead of 10ms. Cc: # 6.1.y Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP") Reported-by: Carsten Hatger Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626 Tested-by: Mateusz Jończyk Reviewed-by: Mateusz Jończyk Acked-by: Mateusz Jończyk Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: Add support for configuring the UIP timeout for RTC reads

2024-02-01T00:21:02+00:00

commit 120931db07b49252aba2073096b595482d71857c upstream. The UIP timeout is hardcoded to 10ms for all RTC reads, but in some contexts this might not be enough time. Add a timeout parameter to mc146818_get_time() and mc146818_get_time_callback(). If UIP timeout is configured by caller to be >=100 ms and a call takes this long, log a warning. Make all callers use 10ms to ensure no functional changes. Cc: # 6.1.y Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP") Signed-off-by: Mario Limonciello Tested-by: Mateusz Jończyk Reviewed-by: Mateusz Jończyk Acked-by: Mateusz Jończyk Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

PM: sleep: Fix possible deadlocks in core system-wide PM code

2024-02-01T00:20:53+00:00

commit 7839d0078e0d5e6cc2fa0b0dfbee71de74f1e557 upstream. It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false. Link: https://lore.kernel.org/linux-pm/ZYvjiqX6EsL15moe@perf/ Reported-by: Youngmin Nam Signed-off-by: Rafael J. Wysocki Reviewed-by: Stanislaw Gruszka Tested-by: Youngmin Nam Reviewed-by: Ulf Hansson Cc: 5.7+ # 5.7+: 6aa09a5bccd8 async: Split async_schedule_node_domain() Cc: 5.7+ # 5.7+: 7d4b5d7a37bd async: Introduce async_schedule_dev_nocall() Cc: 5.7+ # 5.7+ Signed-off-by: Greg Kroah-Hartman

Merge branch 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into for-next/scmi/updates

2023-10-06T08:40:10+00:00

This is the merge of immutable point in PM OPP tree shared with SCMI so that the SCMI changes based on these OPP changes can be merged via the SCMI tree. * 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state()

PM: domains: Implement the ->set_performance_state() callback for genpd

2023-10-06T07:07:33+00:00

To enable generic support for performance scaling for PM domains, let's implement the ->set_performance_state() callback for genpd. Beyond this change, users of the corresponding genpd specific API, dev_pm_genpd_set_performance_state() are encouraged to switch to the common dev_pm_domain_set_performance_state() API. Signed-off-by: Ulf Hansson Acked-by: Rafael J. Wysocki Signed-off-by: Viresh Kumar

PM: domains: Introduce dev_pm_domain_set_performance_state()

2023-10-06T07:07:33+00:00

The generic PM domain is currently the only PM domain variant that supports performance scaling. To allow performance scaling to be supported through a common interface, let's add an optional callback ->set_performance_state(), in the struct dev_pm_domain. Moreover, let's add a function, dev_pm_domain_set_performance_state(), that may be called by consumers to request a new performance state for a device through its PM domain. Note that, in most cases it's preferred that a consumer use the OPP library to request a new performance state for its device. Although, this requires some additional changes to be supported, which are being implemented from subsequent changes. Signed-off-by: Ulf Hansson Acked-by: Rafael J. Wysocki Signed-off-by: Viresh Kumar

PM: domains: Allow genpd providers to manage OPP tables directly by its FW

2023-09-21T15:35:14+00:00

In some cases the OPP tables aren't specified in device tree, but rather encoded in the FW. To allow a genpd provider to specify them dynamically instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW. Signed-off-by: Ulf Hansson Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla

PM: sleep: wakeirq: drop unused enable helpers

2023-07-24T07:51:51+00:00

Drop the wake-irq enable and disable helpers which have not been used since commit bed570307ed7 ("PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend"). Note that these functions are essentially just leftovers from the first iteration of the wake-irq implementation where device drivers were supposed to call these functions themselves instead of PM core (as is also indicated by the bogus kernel doc comments). Signed-off-by: Johan Hovold Reviewed-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki

PM: sleep: wakeirq: fix wake irq arming

2023-07-24T07:51:51+00:00

The decision whether to enable a wake irq during suspend can not be done based on the runtime PM state directly as a driver may use wake irqs without implementing runtime PM. Such drivers specifically leave the state set to the default 'suspended' and the wake irq is thus never enabled at suspend. Add a new wake irq flag to track whether a dedicated wake irq has been enabled at runtime suspend and therefore must not be enabled at system suspend. Note that pm_runtime_enabled() can not be used as runtime PM is always disabled during late suspend. Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq") Cc: 4.16+ # 4.16+ Signed-off-by: Johan Hovold Reviewed-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-sleep' and 'pm-domains'

2023-06-26T15:44:50+00:00

Merge updates related to system-wide power management and generic power domains (genpd) updates for 6.5-rc1: - Fix the handling of pm_suspend_target_state when CONFIG_PM is unset (Kai-Heng Feng). - Correct spelling mistake in a comment in the hibernation code (Wang Honghui). - Add arch_resume_nosmt() prototype to avoid a "missing prototypes" build warning (Arnd Bergmann). - Restrict pm_pr_dbg() to system-wide power transitions and use it in a few additional places (Mario Limonciello). - Drop verification of in-params from genpd_add_device() and ensure that all of its callers will do it (Ulf Hansson). - Prevent possible integer overflows from occurring in genpd_parse_state() (Nikita Zhandarovich). * pm-sleep: platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages pinctrl: amd: Use pm_pr_dbg to show debugging messages ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume PM: suspend: add a arch_resume_nosmt() prototype PM: hibernate: Correct spelling mistake in a comment PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM * pm-domains: PM: domains: Move the verification of in-params from genpd_add_device() PM: domains: fix integer overflow issues in genpd_parse_state()