kernel/linux.git/drivers/base/power, branch v5.15.7

PM: sleep: Avoid calling put_device() under dpm_list_mtx

2021-11-18T18:17:17+00:00

commit 2aa36604e8243698ff22bd5fef0dd0c6bb07ba92 upstream. It is generally unsafe to call put_device() with dpm_list_mtx held, because the given device's release routine may carry out an action depending on that lock which then may deadlock, so modify the system-wide suspend and resume of devices to always drop dpm_list_mtx before calling put_device() (and adjust white space somewhat while at it). For instance, this prevents the following splat from showing up in the kernel log after a system resume in certain configurations: [ 3290.969514] ====================================================== [ 3290.969517] WARNING: possible circular locking dependency detected [ 3290.969519] 5.15.0+ #2420 Tainted: G S [ 3290.969523] ------------------------------------------------------ [ 3290.969525] systemd-sleep/4553 is trying to acquire lock: [ 3290.969529] ffff888117ab1138 ((wq_completion)hci0#2){+.+.}-{0:0}, at: flush_workqueue+0x87/0x4a0 [ 3290.969554] but task is already holding lock: [ 3290.969556] ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.969571] which lock already depends on the new lock. [ 3290.969573] the existing dependency chain (in reverse order) is: [ 3290.969575] -> #3 (dpm_list_mtx){+.+.}-{3:3}: [ 3290.969583] __mutex_lock+0x9d/0xa30 [ 3290.969591] device_pm_add+0x2e/0xe0 [ 3290.969597] device_add+0x4d5/0x8f0 [ 3290.969605] hci_conn_add_sysfs+0x43/0xb0 [bluetooth] [ 3290.969689] hci_conn_complete_evt.isra.71+0x124/0x750 [bluetooth] [ 3290.969747] hci_event_packet+0xd6c/0x28a0 [bluetooth] [ 3290.969798] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969842] process_one_work+0x2aa/0x650 [ 3290.969851] worker_thread+0x39/0x400 [ 3290.969859] kthread+0x142/0x170 [ 3290.969865] ret_from_fork+0x22/0x30 [ 3290.969872] -> #2 (&hdev->lock){+.+.}-{3:3}: [ 3290.969881] __mutex_lock+0x9d/0xa30 [ 3290.969887] hci_event_packet+0xba/0x28a0 [bluetooth] [ 3290.969935] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969978] process_one_work+0x2aa/0x650 [ 3290.969985] worker_thread+0x39/0x400 [ 3290.969993] kthread+0x142/0x170 [ 3290.969999] ret_from_fork+0x22/0x30 [ 3290.970004] -> #1 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}: [ 3290.970013] process_one_work+0x27d/0x650 [ 3290.970020] worker_thread+0x39/0x400 [ 3290.970028] kthread+0x142/0x170 [ 3290.970033] ret_from_fork+0x22/0x30 [ 3290.970038] -> #0 ((wq_completion)hci0#2){+.+.}-{0:0}: [ 3290.970047] __lock_acquire+0x15cb/0x1b50 [ 3290.970054] lock_acquire+0x26c/0x300 [ 3290.970059] flush_workqueue+0xae/0x4a0 [ 3290.970066] drain_workqueue+0xa1/0x130 [ 3290.970073] destroy_workqueue+0x34/0x1f0 [ 3290.970081] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970130] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970195] device_release+0x33/0x90 [ 3290.970201] kobject_release+0x63/0x160 [ 3290.970211] dpm_resume+0x164/0x3e0 [ 3290.970215] dpm_resume_end+0xd/0x20 [ 3290.970220] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970229] pm_suspend+0x26b/0x310 [ 3290.970236] state_store+0x42/0x90 [ 3290.970243] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970251] new_sync_write+0x125/0x1c0 [ 3290.970257] vfs_write+0x360/0x3c0 [ 3290.970263] ksys_write+0xa7/0xe0 [ 3290.970269] do_syscall_64+0x3a/0x80 [ 3290.970276] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970284] other info that might help us debug this: [ 3290.970285] Chain exists of: (wq_completion)hci0#2 --> &hdev->lock --> dpm_list_mtx [ 3290.970297] Possible unsafe locking scenario: [ 3290.970299] CPU0 CPU1 [ 3290.970300] ---- ---- [ 3290.970302] lock(dpm_list_mtx); [ 3290.970306] lock(&hdev->lock); [ 3290.970310] lock(dpm_list_mtx); [ 3290.970314] lock((wq_completion)hci0#2); [ 3290.970319] *** DEADLOCK *** [ 3290.970321] 7 locks held by systemd-sleep/4553: [ 3290.970325] #0: ffff888103bcd448 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xa7/0xe0 [ 3290.970341] #1: ffff888115a14488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x103/0x1b0 [ 3290.970355] #2: ffff888100f719e0 (kn->active#233){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x10c/0x1b0 [ 3290.970369] #3: ffffffff82661048 (autosleep_lock){+.+.}-{3:3}, at: state_store+0x12/0x90 [ 3290.970384] #4: ffffffff82658ac8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9f/0x310 [ 3290.970399] #5: ffffffff827f2a48 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x4c/0x80 [ 3290.970416] #6: ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.970428] stack backtrace: [ 3290.970431] CPU: 3 PID: 4553 Comm: systemd-sleep Tainted: G S 5.15.0+ #2420 [ 3290.970438] Hardware name: Dell Inc. XPS 13 9380/0RYJWW, BIOS 1.5.0 06/03/2019 [ 3290.970441] Call Trace: [ 3290.970446] dump_stack_lvl+0x44/0x57 [ 3290.970454] check_noncircular+0x105/0x120 [ 3290.970468] ? __lock_acquire+0x15cb/0x1b50 [ 3290.970474] __lock_acquire+0x15cb/0x1b50 [ 3290.970487] lock_acquire+0x26c/0x300 [ 3290.970493] ? flush_workqueue+0x87/0x4a0 [ 3290.970503] ? __raw_spin_lock_init+0x3b/0x60 [ 3290.970510] ? lockdep_init_map_type+0x58/0x240 [ 3290.970519] flush_workqueue+0xae/0x4a0 [ 3290.970526] ? flush_workqueue+0x87/0x4a0 [ 3290.970544] ? drain_workqueue+0xa1/0x130 [ 3290.970552] drain_workqueue+0xa1/0x130 [ 3290.970561] destroy_workqueue+0x34/0x1f0 [ 3290.970572] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970624] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970687] device_release+0x33/0x90 [ 3290.970695] kobject_release+0x63/0x160 [ 3290.970705] dpm_resume+0x164/0x3e0 [ 3290.970710] ? dpm_resume_early+0x251/0x3b0 [ 3290.970718] dpm_resume_end+0xd/0x20 [ 3290.970723] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970737] pm_suspend+0x26b/0x310 [ 3290.970746] state_store+0x42/0x90 [ 3290.970755] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970764] new_sync_write+0x125/0x1c0 [ 3290.970777] vfs_write+0x360/0x3c0 [ 3290.970785] ksys_write+0xa7/0xe0 [ 3290.970794] do_syscall_64+0x3a/0x80 [ 3290.970803] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970811] RIP: 0033:0x7f41b1328164 [ 3290.970819] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 4a d2 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [ 3290.970824] RSP: 002b:00007ffe6ae21b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3290.970831] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f41b1328164 [ 3290.970836] RDX: 0000000000000004 RSI: 000055965e651070 RDI: 0000000000000004 [ 3290.970839] RBP: 000055965e651070 R08: 000055965e64f390 R09: 00007f41b1e3d1c0 [ 3290.970843] R10: 000000000000000a R11: 0000000000000246 R12: 0000000000000004 [ 3290.970846] R13: 0000000000000001 R14: 000055965e64f2b0 R15: 0000000000000004 Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions

2021-11-18T18:15:59+00:00

commit 928265e3601cde78c7e0a3e518a93b27defed3b1 upstream. There is no reason to allow "syscore" devices to runtime-suspend during system-wide PM transitions, because they are subject to the same possible failure modes as any other devices in that respect. Accordingly, change device_prepare() and device_complete() to call pm_runtime_get_noresume() and pm_runtime_put(), respectively, for "syscore" devices too. Fixes: 057d51a1268f ("Merge branch 'pm-sleep'") Signed-off-by: Rafael J. Wysocki Cc: 3.10+ # 3.10+ Reviewed-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2021-09-17T15:31:49+00:00

Pull xen fixes from Juergen Gross: - The first hunk of a Xen swiotlb fixup series fixing multiple minor issues and doing some small cleanups - Some further Xen related fixes avoiding WARN() splats when running as Xen guests or dom0 - A Kconfig fix allowing the pvcalls frontend to be built as a module * tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: swiotlb-xen: drop DEFAULT_NSLABS swiotlb-xen: arrange to have buffer info logged swiotlb-xen: drop leftover __ref swiotlb-xen: limit init retries swiotlb-xen: suppress certain init retries swiotlb-xen: maintain slab count properly swiotlb-xen: fix late init retry swiotlb-xen: avoid double free xen/pvcalls: backend can be a module xen: fix usage of pmd_populate in mremap for pv guests xen: reset legacy rtc flag for PV domU PM: base: power: don't try to use non-existing RTC for storing data xen/balloon: use a kernel thread instead a workqueue

PM: base: power: don't try to use non-existing RTC for storing data

2021-09-14T07:56:20+00:00

If there is no legacy RTC device, don't try to use it for storing trace data across suspend/resume. Cc: Signed-off-by: Juergen Gross Reviewed-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com Signed-off-by: Juergen Gross

Merge branches 'pm-cpufreq', 'pm-sleep' and 'pm-em'

2021-09-10T18:26:08+00:00

* pm-cpufreq: cpufreq: intel_pstate: hybrid: Rework HWP calibration ACPI: CPPC: Introduce cppc_get_nominal_perf() * pm-sleep: PM: sleep: core: Avoid setting power.must_resume to false PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq() * pm-em: Documentation: power: include kernel-doc in Energy Model doc PM: EM: fix kernel-doc comments

PM: sleep: core: Avoid setting power.must_resume to false

2021-09-07T19:18:34+00:00

There are variables(power.may_skip_resume and dev->power.must_resume) and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after a system wide suspend transition. Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its "noirq" and "early" resume callbacks to be skipped if the device can be left in suspend after a system-wide transition into the working state. PM core determines that the driver's "noirq" and "early" resume callbacks should be skipped or not with dev_pm_skip_resume() function by checking power.may_skip_resume variable. power.must_resume variable is getting set to false in __device_suspend() function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings. In problematic scenario, where all the devices in the suspend_late stage are successful and some device can fail to suspend in suspend_noirq phase. So some devices successfully suspended in suspend_late stage are not getting chance to execute __device_suspend_noirq() to set dev->power.must_resume variable to true and not getting resumed in early_resume phase. Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before setting power.must_resume variable in __device_suspend function. Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase") Signed-off-by: Prasad Sodagudi Signed-off-by: Rafael J. Wysocki

PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()

2021-09-07T19:10:09+00:00

This function has the 'irq' parameter which isn't ever used, so drop it. Signed-off-by: Sergey Shtylyov [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2021-09-02T21:17:24+00:00

Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ...

Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2021-09-01T15:44:42+00:00

Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...

Merge back new PM domains material for v5.15.

2021-08-30T17:20:32+00:00