kernel/linux.git/drivers/base/dd.c, branch linux-4.20.y

driver core: Postpone DMA tear-down until after devres release

2019-03-10T06:10:09+00:00

commit 376991db4b6464e906d699ef07681e2ffa8ab08c upstream. When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS (R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for device pass-through for virtualization: echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind the kernel crashes with: Unable to handle kernel paging request at virtual address ffffffbf029ffffc Mem abort info: ESR = 0x96000006 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287 Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) pstate: 60400005 (nZCv daif +PAN -UAO) pc : __free_pages+0x8/0x58 lr : __dma_direct_free_pages+0x50/0x5c sp : ffffff801268baa0 x29: ffffff801268baa0 x28: 0000000000000000 x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0 x25: ffffffc6f9c60810 x24: 0000000000000000 x23: 00000000fffff000 x22: ffffff8012145000 x21: 0000000000000800 x20: ffffffbf029fffc8 x19: 0000000000000000 x18: ffffffc6f86c42c8 x17: 0000000000000000 x16: 0000000000000070 x15: 0000000000000003 x14: 0000000000000000 x13: ffffff801103d7f8 x12: 0000000000000028 x11: ffffff8011117604 x10: 0000000000009ad8 x9 : ffffff80110126d0 x8 : ffffffc6f7563000 x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018 x5 : ffffff8011cf3cc8 x4 : 0000000000004000 x3 : 0000000000080000 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffffbf029fffc8 Process bash (pid: 1098, stack limit = 0x00000000c38e3e32) Call trace: __free_pages+0x8/0x58 __dma_direct_free_pages+0x50/0x5c arch_dma_free+0x1c/0x98 dma_direct_free+0x14/0x24 dma_free_attrs+0x9c/0xdc dmam_release+0x18/0x20 release_nodes+0x25c/0x28c devres_release_all+0x48/0x4c device_release_driver_internal+0x184/0x1f0 device_release_driver+0x14/0x1c unbind_store+0x70/0xb8 drv_attr_store+0x24/0x34 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x154/0x1c4 __vfs_write+0x34/0x164 vfs_write+0xb4/0x16c ksys_write+0x5c/0xbc __arm64_sys_write+0x14/0x1c el0_svc_common+0x98/0x114 el0_svc_handler+0x1c/0x24 el0_svc+0x8/0xc Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404) ---[ end trace 8c564cdd3a1a840f ]--- While I've bisected this to commit e8e683ae9a736407 ("iommu/of: Fix probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels does fix the problem, this turned out to be a red herring. On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL. Hence if a driver has used a managed DMA allocation API, the allocated DMA memory will be freed using the direct DMA ops, while it may have been allocated using a custom DMA ops (iommu_dma_ops in this case). Fix this by reversing the order of the calls to devres_release_all() and arch_teardown_dma_ops(). Signed-off-by: Geert Uytterhoeven Acked-by: Christoph Hellwig Reviewed-by: Rafael J. Wysocki Cc: stable Reviewed-by: Robin Murphy Signed-off-by: Greg Kroah-Hartman

driver core: Move async_synchronize_full call

2019-02-12T19:02:15+00:00

[ Upstream commit c37d721c68ad88925ba0e72f6e14acb829a8c6bb ] Move the async_synchronize_full call out of __device_release_driver and into driver_detach. The idea behind this is that the async_synchronize_full call will only guarantee that any existing async operations are flushed. This doesn't do anything to guarantee that a hotplug event that may occur while we are doing the release of the driver will not be asynchronously scheduled. By moving this into the driver_detach path we can avoid potential deadlocks as we aren't holding the device lock at this point and we should not have the driver we want to flush loaded so the flush will take care of any asynchronous events the driver we are detaching might have scheduled. Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers") Reviewed-by: Bart Van Assche Reviewed-by: Dan Williams Signed-off-by: Alexander Duyck Reviewed-by: Luis Chamberlain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

driver core: Add missing dev->bus->need_parent_lock checks

2019-01-13T08:24:05+00:00

commit e121a833745b4708b660e3fe6776129c2956b041 upstream. __device_release_driver() has to check dev->bus->need_parent_lock before dropping the parent lock and acquiring it again as it may attempt to drop a lock that hasn't been acquired or lock a device that shouldn't be locked and create a lock imbalance. Fixes: 8c97a46af04b (driver core: hold dev's parent lock when needed) Signed-off-by: Rafael J. Wysocki Cc: stable Reviewed-by: Daniel Vetter Signed-off-by: Greg Kroah-Hartman

dma-mapping: remove dma_deconfigure

2018-09-08T09:19:28+00:00

This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

dma-mapping: remove dma_configure

2018-09-08T09:19:20+00:00

There is no good reason for this indirection given that the method always exists. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

Merge 4.18-rc7 into driver-core-next

2018-07-30T08:08:09+00:00

We need the driver core changes in here as well for testing. Signed-off-by: Greg Kroah-Hartman

driver core: Partially revert "driver core: correct device's shutdown order"

2018-07-10T15:47:43+00:00

Commit 52cdbdd49853 (driver core: correct device's shutdown order) introduced a regression by breaking device shutdown on some systems. Namely, the devices_kset_move_last() call in really_probe() added by that commit is a mistake as it may cause parents to follow children in the devices_kset list which then causes shutdown to fail. For example, if a device has children before really_probe() is called for it (which is not uncommon), that call will cause it to be reordered after the children in the devices_kset list and the ordering of that list will not reflect the correct device shutdown order any more. Also it causes the devices_kset list to be constantly reordered until all drivers have been probed which is totally pointless overhead in the majority of cases and it only covered an issue with system shutdown, while system-wide suspend/resume potentially had the same issue on the affected platforms (which was not covered). Moreover, the shutdown issue originally addressed by the change in really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc any more, since dra7 started to use the sdhci-omap driver which doesn't disable any regulators during shutdown, so the really_probe() part of commit 52cdbdd49853 can be safely reverted. [The original issue was related to the omap_hsmmc driver used by dra7 previously.] For the above reasons, revert the really_probe() modifications made by commit 52cdbdd49853. The other code changes made by commit 52cdbdd49853 are useful and they need not be reverted. Fixes: 52cdbdd49853 (driver core: correct device's shutdown order) Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/ Reported-by: Pingfan Liu Tested-by: Pingfan Liu Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Rafael J. Wysocki Cc: stable Signed-off-by: Greg Kroah-Hartman

driver core: allow stopping deferred probe after init

2018-07-10T15:22:35+00:00

Deferred probe will currently wait forever on dependent devices to probe, but sometimes a driver will never exist. It's also not always critical for a driver to exist. Platforms can rely on default configuration from the bootloader or reset defaults for things such as pinctrl and power domains. This is often the case with initial platform support until various drivers get enabled. There's at least 2 scenarios where deferred probe can render a platform broken. Both involve using a DT which has more devices and dependencies than the kernel supports. The 1st case is a driver may be disabled in the kernel config. The 2nd case is the kernel version may simply not have the dependent driver. This can happen if using a newer DT (provided by firmware perhaps) with a stable kernel version. Deferred probe issues can be difficult to debug especially if the console has dependencies or userspace fails to boot to a shell. There are also cases like IOMMUs where only built-in drivers are supported, so deferring probe after initcalls is not needed. The IOMMU subsystem implemented its own mechanism to handle this using OF_DECLARE linker sections. This commit adds makes ending deferred probe conditional on initcalls being completed or a debug timeout. Subsystems or drivers may opt-in by calling driver_deferred_probe_check_init_done() instead of unconditionally returning -EPROBE_DEFER. They may use additional information from DT or kernel's config to decide whether to continue to defer probe or not. The timeout mechanism is intended for debug purposes and WARNs loudly. The remaining deferred probe pending list will also be dumped after the timeout. Not that this timeout won't work for the console which needs to be enabled before userspace starts. However, if the console's dependencies are resolved, then the kernel log will be printed (as opposed to no output). Cc: Alexander Graf Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

driver core: add a debugfs entry to show deferred devices

2018-07-08T13:55:03+00:00

With Device Trees (DT), the dependencies of the devices are defined in the DT, then the drivers parse that information to lookup the needed resources that have as dependencies. Since drivers and devices are registered in a non-deterministic way, it is possible that a device that is a dependency has not been registered yet by the time that is looked up. In this case the driver that requires this dependency cannot probe and has to defer it. So the driver core adds it to a list of deferred devices that is iterated again every time that a new driver is probed successfully. For debugging purposes it may be useful to know what are the devices whose probe function was deferred. Add a debugfs entry showing that information. $ cat /sys/kernel/debug/devices_deferred 48070000.i2c:twl@48:bci musb-hdrc.0.auto omapdrm.0 This information could be obtained partially by enabling debugging, but it means that the kernel log has to be parsed and the probe deferral balanced with the successes. This can be error probe and has to be done in a ad-hoc manner by everyone who needs to debug these kind of issues. Since the information is already known by the kernel, just show it to make it easier to debug. Signed-off-by: Javier Martinez Canillas Reviewed-by: Andy Shevchenko Reviewed-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

drivers: base: initcall_debug logs for driver probe times

2018-07-06T14:53:17+00:00

Add initcall_debug logs for each driver device probe call, for example: probe of a3800000.ramoops returned 1 after 3007 usecs This replaces the previous code added to report times for deferred probes. It also reports OF platform bus device creates that were formerly lumped together in a single entry for function of_platform_default_populate_init, as well as helping to annotate other initcalls that involve device probing. Remove restriction on printing probe times only during initcalls, since initcall_debug now continues to show driver timing info past the boot phase. Signed-off-by: Todd Poynor Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman