kernel/linux.git/drivers/base/core.c, branch v4.19.77

driver core: Fix use-after-free and double free on glue directory

2019-09-19T07:09:37+00:00

commit ac43432cb1f5c2950408534987e57c2071e24d8f upstream. There is a race condition between removing glue directory and adding a new device under the glue dir. It can be reproduced in following test: CPU1: CPU2: device_add() get_device_parent() class_dir_create_and_add() kobject_add_internal() create_dir() // create glue_dir device_add() get_device_parent() kobject_get() // get glue_dir device_del() cleanup_glue_dir() kobject_del(glue_dir) kobject_add() kobject_add_internal() create_dir() // in glue_dir sysfs_create_dir_ns() kernfs_create_dir_ns(sd) sysfs_remove_dir() // glue_dir->sd=NULL sysfs_put() // free glue_dir->sd // sd is freed kernfs_new_node(sd) kernfs_get(glue_dir) kernfs_add_one() kernfs_put() Before CPU1 remove last child device under glue dir, if CPU2 add a new device under glue dir, the glue_dir kobject reference count will be increase to 2 via kobject_get() in get_device_parent(). And CPU2 has been called kernfs_create_dir_ns(), but not call kernfs_new_node(). Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next call kernfs_add_one() by CPU2 will fail(This is also use-after-free) and call kernfs_put() to decrease reference count. Because the reference count is decremented to 0, it will also call kmem_cache_free() to free the glue_dir->sd again. This will result in double free. In order to avoid this happening, we also should make sure that kernfs_node for glue_dir is released in CPU1 only when refcount for glue_dir kobj is 1 to fix this race. The following calltrace is captured in kernel 4.14 with the following patch applied: commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") -------------------------------------------------------------------------- [ 3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494 Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get(). .... [ 3.633986] Call trace: [ 3.633991] kernfs_create_dir_ns+0xa8/0xb0 [ 3.633994] sysfs_create_dir_ns+0x54/0xe8 [ 3.634001] kobject_add_internal+0x22c/0x3f0 [ 3.634005] kobject_add+0xe4/0x118 [ 3.634011] device_add+0x200/0x870 [ 3.634017] _request_firmware+0x958/0xc38 [ 3.634020] request_firmware_into_buf+0x4c/0x70 .... [ 3.634064] kernel BUG at .../mm/slub.c:294! Here is BUG_ON(object == fp) in set_freepointer(). .... [ 3.634346] Call trace: [ 3.634351] kmem_cache_free+0x504/0x6b8 [ 3.634355] kernfs_put+0x14c/0x1d8 [ 3.634359] kernfs_create_dir_ns+0x88/0xb0 [ 3.634362] sysfs_create_dir_ns+0x54/0xe8 [ 3.634366] kobject_add_internal+0x22c/0x3f0 [ 3.634370] kobject_add+0xe4/0x118 [ 3.634374] device_add+0x200/0x870 [ 3.634378] _request_firmware+0x958/0xc38 [ 3.634381] request_firmware_into_buf+0x4c/0x70 -------------------------------------------------------------------------- Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") Signed-off-by: Muchun Song Reviewed-by: Mukesh Ojha Signed-off-by: Prateek Sood Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.com Signed-off-by: Greg Kroah-Hartman

drivers/base: Introduce kill_device()

2019-08-09T15:52:28+00:00

commit 00289cd87676e14913d2d8492d1ce05c4baafdae upstream. The libnvdimm subsystem arranges for devices to be destroyed as a result of a sysfs operation. Since device_unregister() cannot be called from an actively running sysfs attribute of the same device libnvdimm arranges for device_unregister() to be performed in an out-of-line async context. The driver core maintains a 'dead' state for coordinating its own racing async registration / de-registration requests. Rather than add local 'dead' state tracking infrastructure to libnvdimm device objects, export the existing state tracking via a new kill_device() helper. The kill_device() helper simply marks the device as dead, i.e. that it is on its way to device_del(), or returns that the device was already dead. This can be used in advance of calling device_unregister() for subsystems like libnvdimm that might need to handle multiple user threads racing to delete a device. This refactoring does not change any behavior, but it is a pre-requisite for follow-on fixes and therefore marked for -stable. Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...") Cc: Tested-by: Jane Chu Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/156341207332.292348.14959761496009347574.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

driver core: Establish order of operations for device_add and device_del via bitflag

2019-08-09T15:52:28+00:00

commit 3451a495ef244a88ed6317a035299d835554d579 upstream. Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by: Dan Williams Reviewed-by: Rafael J. Wysocki Signed-off-by: Alexander Duyck Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

kobject: return error code if writing /sys/.../uevent fails

2019-02-12T18:47:06+00:00

[ Upstream commit df44b479654f62b478c18ee4d8bc4e9f897a9844 ] Propagate error code back to userspace if writing the /sys/.../uevent file fails. Before, the write operation always returned with success, even if we failed to recognize the input string or if we failed to generate the uevent itself. With the error codes properly propagated back to userspace, we are able to react in userspace accordingly by not assuming and awaiting a uevent that is not delivered. Signed-off-by: Peter Rajnoha Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2018-08-18T18:44:53+00:00

Pull driver core updates from Greg KH: "Here are all of the driver core and related patches for 4.19-rc1. Nothing huge here, just a number of small cleanups and the ability to now stop the deferred probing after init happens. All of these have been in linux-next for a while with only a merge issue reported" * tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) base: core: Remove WARN_ON from link dependencies check drivers/base: stop new probing during shutdown drivers: core: Remove glue dirs from sysfs earlier driver core: remove unnecessary function extern declare sysfs.h: fix non-kernel-doc comment PM / Domains: Stop deferring probe at the end of initcall iommu: Remove IOMMU_OF_DECLARE iommu: Stop deferring probe at end of initcalls pinctrl: Support stopping deferred probe after initcalls dt-bindings: pinctrl: add a 'pinctrl-use-default' property driver core: allow stopping deferred probe after init driver core: add a debugfs entry to show deferred devices sysfs: Fix internal_create_group() for named group updates base: fix order of OF initialization linux/device.h: fix kernel-doc notation warning Documentation: update firmware loader fallback reference kobject: Replace strncpy with memcpy drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number kernfs: Replace strncpy with memcpy device: Add #define dev_fmt similar to #define pr_fmt ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25+00:00

Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...

Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-08-14T20:12:24+00:00

Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...

Merge branch 'regulator-4.19' into regulator-next

2018-08-10T16:31:24+00:00

base: core: Remove WARN_ON from link dependencies check

2018-07-21T07:51:44+00:00

In some cases the link between between customer and supplier already exist, for example when a device use its parent as a supplier. Do not warn about already existing dependencies because device_link_add() takes care of this case. Link: http://lkml.kernel.org/r/20180709111753eucas1p1f32e66fb2f7ea3216097cd72a132355d~-rzycA5Rg0378203782eucas1p1C@eucas1p1.samsung.com Reported-by: Marek Szyprowski Reviewed-by: Mark Brown Signed-off-by: Benjamin Gaignard Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

drivers/base: stop new probing during shutdown

2018-07-21T07:51:44+00:00

There is a race window in device_shutdown(), which may cause -1. parent device shut down before child or -2. no shutdown on a new probing device. For 1st, taking the following scenario: device_shutdown new plugin device list_del_init(parent_dev); spin_unlock(list_lock); device_add(child) probe child shutdown parent_dev --> now child is on the tail of devices_kset For 2nd, taking the following scenario: device_shutdown new plugin device device_add(dev) device_lock(dev); ... device_unlock(dev); probe dev --> now, the new occurred dev has no opportunity to shutdown To fix this race issue, just prevent the new probing request. With this logic, device_shutdown() is more similar to dpm_prepare(). Signed-off-by: Pingfan Liu Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman