kernel/linux.git/drivers/base/Kconfig, branch v4.14.85

dma-buf/fence: Fix lock inversion within dma-fence-array

2018-03-19T07:42:47+00:00

[ Upstream commit 03e4e0a9e02cf703da331ff6cfd57d0be9bf5692 ] Ages ago Rob Clark noted, "Currently with fence-array, we have a potential deadlock situation. If we fence_add_callback() on an array-fence, the array-fence's lock is acquired first, and in it's ->enable_signaling() callback, it will install cbs on it's array-member fences, so the array-member's lock is acquired second. But in the signal path, the array-member's lock is acquired first, and the array-fence's lock acquired second." Rob proposed either extensive changes to dma-fence to unnest the fence-array signaling, or to defer the signaling onto a workqueue. This is a more refined version of the later, that should keep the latency of the fence signaling to a minimum by using an irq-work, which is executed asap. Reported-by: Rob Clark Suggested-by: Rob Clark References: 1476635975-21981-1-git-send-email-robdclark@gmail.com Signed-off-by: Chris Wilson Cc: Rob Clark Cc: Gustavo Padovan Cc: Sumit Semwal Cc: Christian König Reviewed-by: Christian König Signed-off-by: Sumit Semwal Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sysfs/cpu: Add vulnerability folder

2018-01-17T08:45:27+00:00

commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream. As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Will Deacon Cc: Dave Hansen Cc: Linus Torvalds Cc: Borislav Petkov Cc: David Woodhouse Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de Signed-off-by: Greg Kroah-Hartman

firmware: cleanup FIRMWARE_IN_KERNEL message

2017-12-14T08:52:50+00:00

commit 0946b2fb38fdb6585a5ac3ca84ac73924f645952 upstream. The help for FIRMWARE_IN_KERNEL still references the firmware_install command that was recently removed by commit 5620a0d1aacd ("firmware: delete in-kernel firmware"). Clean up the message to direct the user to their distribution's linux-firmware package, and remove any reference to firmware being included in the kernel source tree. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware"). Cc: Masahiro Yamada Cc: David Woodhouse Signed-off-by: Robin H. Johnson Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

firmware: Restore support for built-in firmware

2017-09-16T17:58:48+00:00

Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf Acked-by: Greg K-H Signed-off-by: Linus Torvalds

arm, arm64: factorize common cpu capacity default code

2017-06-03T10:10:09+00:00

arm and arm64 share lot of code relative to parsing CPU capacity information from DT, using that information for appropriate scaling and exposing a sysfs interface for chaging such values at runtime. Factorize such code in a common place (driver/base/arch_topology.c) in preparation for further additions. Suggested-by: Will Deacon Suggested-by: Mark Rutland Suggested-by: Catalin Marinas Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Greg Kroah-Hartman Signed-off-by: Juri Lelli Acked-by: Russell King Acked-by: Catalin Marinas Acked-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2016-12-13T19:42:18+00:00

Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...

Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux

2016-12-13T17:35:09+00:00

Pull drm updates from Dave Airlie: "This is the main pull request for drm for 4.10 kernel. New drivers: - ZTE VOU display driver (zxdrm) - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson) - MXSFB support (mxsfb) Core: - Format handling has been reworked - Better atomic state debugging - drm_mm leak debugging - Atomic explicit fencing support - fbdev helper ops - Documentation updates - MST fbcon fixes Bridge: - Silicon Image SiI8620 driver Panel: - Add support for new simple panels i915: - GVT Device model - Better HDMI2.0 support on skylake - More watermark fixes - GPU idling rework for suspend/resume - DP Audio workarounds - Scheduler prep-work - Opregion CADL handling - GPU scheduler and priority boosting amdgfx/radeon: - Support for virtual devices - New VM manager for non-contig VRAM buffers - UVD powergating - SI register header cleanup - Cursor fixes - Powermanagement fixes nouveau: - Powermangement reworks for better voltage/clock changes - Atomic modesetting support - Displayport Multistream (MST) support. - GP102/104 hang and cursor fixes - GP106 support hisilicon: - hibmc support (BMC chip for aarch64 servers) armada: - add tracing support for overlay change - refactor plane support - de-midlayer the driver omapdrm: - Timing code cleanups rcar-du: - R8A7792/R8A7796 support - Misc fixes. sunxi: - A31 SoC display engine support imx-drm: - YUV format support - Cleanup plane atomic update mali-dp: - Misc fixes dw-hdmi: - Add support for HDMI i2c master controller tegra: - IOMMU support fixes - Error handling fixes tda998x: - Fix connector registration - Improved robustness - Fix infoframe/audio compliance virtio: - fix busid issues - allocate more vbufs qxl: - misc fixes and cleanups. vc4: - Fragment shader threading - ETC1 support - VEC (tv-out) support msm: - A5XX GPU support - Lots of atomic changes tilcdc: - Misc fixes and cleanups. etnaviv: - Fix dma-buf export path - DRAW_INSTANCED support - fix driver on i.MX6SX exynos: - HDMI refactoring fsl-dcu: - fbdev changes" * tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits) drm/nouveau/kms/nv50: fix atomic regression on original G80 drm/nouveau/bl: Do not register interface if Apple GMUX detected drm/nouveau/bl: Assign different names to interfaces drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2 drm/nouveau/ltc: protect clearing of comptags with mutex drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap drm/nouveau/core: recognise GP106 chipset drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode drm/nouveau/gr/gf100-: properly ack all FECS error interrupts drm/nouveau/fifo/gf100-: recover from host mmu faults drm: Add fake controlD* symlinks for backwards compat drm/vc4: Don't use drm_put_dev drm/vc4: Document VEC DT binding drm/vc4: Add support for the VEC (Video Encoder) IP drm: Add TV connector states to drm_connector_state drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum drm/vc4: Fix ->clock_select setting for the VEC encoder drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well drm/amdgpu: use pin rather than pin_restricted in a few cases ...

Merge tag 'soc-device-match-tag1' into next

2016-11-29T08:09:09+00:00

Merge the immutable soc-device-match-tag1 provided by Geert Uytterhoeven to pull in the new soc_device_match() interface for matching against soc_bus attributes.

driver-core: add test module for asynchronous probing

2016-11-10T16:28:16+00:00

This test module tries to test asynchronous driver probing by having a driver that sleeps for an extended period of time (5 secs) in its probe() method. It measures the time needed to register this driver (with device already registered) and a new device (with driver already registered). The module will fail to load if the time spent in register call is more than half the probing sleep time. As a sanity check the driver will then try to synchronously register driver and device and fail if registration takes less than half of the probing sleep time. Signed-off-by: Dmitry Torokhov Reviewed-by: Olof Johansson Signed-off-by: Guenter Roeck Signed-off-by: Thierry Escande Signed-off-by: Greg Kroah-Hartman