kernel/linux.git/drivers/ata, branch v6.1.87

ata: libata-scsi: Fix ata_scsi_dev_rescan() error path

2024-04-17T09:18:22+00:00

commit 79336504781e7fee5ddaf046dcc186c8dfdf60b1 upstream. Commit 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") incorrectly handles failures of scsi_resume_device() in ata_scsi_dev_rescan(), leading to a double call to spin_unlock_irqrestore() to unlock a device port. Fix this by redefining the goto labels used in case of errors and only unlock the port scsi_scan_mutex when scsi_resume_device() fails. Bug found with the Smatch static checker warning: drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan() error: double unlocked 'ap->lock' (orig line 4757) Reported-by: Dan Carpenter Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

ata: sata_mv: Fix PCI device ID table declaration compilation warning

2024-04-10T14:28:31+00:00

[ Upstream commit 3137b83a90646917c90951d66489db466b4ae106 ] Building with W=1 shows a warning for an unused variable when CONFIG_PCI is diabled: drivers/ata/sata_mv.c:790:35: error: unused variable 'mv_pci_tbl' [-Werror,-Wunused-const-variable] static const struct pci_device_id mv_pci_tbl[] = { Move the table into the same block that containsn the pci_driver definition. Fixes: 7bb3c5290ca0 ("sata_mv: Remove PCI dependency") Signed-off-by: Arnd Bergmann Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit

2024-04-10T14:28:31+00:00

[ Upstream commit 52f80bb181a9a1530ade30bc18991900bbb9697f ] gcc warns about a memcpy() with overlapping pointers because of an incorrect size calculation: In file included from include/linux/string.h:369, from drivers/ata/sata_sx4.c:66: In function 'memcpy_fromio', inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2: include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict] 97 | #define __underlying_memcpy __builtin_memcpy | ^ include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy' 620 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk' 665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy' 1184 | memcpy(buffer, __io_virt(addr), size); | ^~~~~~ The problem here is the overflow of an unsigned 32-bit number to a negative that gets converted into a signed 'long', keeping a large positive number. Replace the complex calculation with a more readable min() variant that avoids the warning. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Arnd Bergmann Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

scsi: sd: Fix TCG OPAL unlock on system resume

2024-04-03T13:19:51+00:00

commit 0c76106cb97548810214def8ee22700bbbb90543 upstream. Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") introduced the manage_system_start_stop scsi_device flag to allow libata to indicate to the SCSI disk driver that nothing should be done when resuming a disk on system resume. This change turned the execution of sd_resume() into a no-op for ATA devices on system resume. While this solved deadlock issues during device resume, this change also wrongly removed the execution of opal_unlock_from_suspend(). As a result, devices with TCG OPAL locking enabled remain locked and inaccessible after a system resume from sleep. To fix this issue, introduce the SCSI driver resume method and implement it with the sd_resume() function calling opal_unlock_from_suspend(). The former sd_resume() function is renamed to sd_resume_common() and modified to call the new sd_resume() function. For non-ATA devices, this result in no functional changes. In order for libata to explicitly execute sd_resume() when a device is resumed during system restart, the function scsi_resume_device() is introduced. libata calls this function from the revalidation work executed on devie resume, a state that is indicated with the new device flag ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked on resume, allowing normal operation. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538 Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ahci: asm1064: asm1166: don't limit reported ports

2024-04-03T13:19:38+00:00

[ Upstream commit 6cd8adc3e18960f6e59d797285ed34ef473cc896 ] Previously, patches have been added to limit the reported count of SATA ports for asm1064 and asm1166 SATA controllers, as those controllers do report more ports than physically having. While it is allowed to report more ports than physically having in CAP.NP, it is not allowed to report more ports than physically having in the PI (Ports Implemented) register, which is what these HBAs do. (This is a AHCI spec violation.) Unfortunately, it seems that the PMP implementation in these ASMedia HBAs is also violating the AHCI and SATA-IO PMP specification. What these HBAs do is that they do not report that they support PMP (CAP.SPM (Supports Port Multiplier) is not set). Instead, they have decided to add extra "virtual" ports in the PI register that is used if a port multiplier is connected to any of the physical ports of the HBA. Enumerating the devices behind the PMP as specified in the AHCI and SATA-IO specifications, by using PMP READ and PMP WRITE commands to the physical ports of the HBA is not possible, you have to use the "virtual" ports. This is of course bad, because this gives us no way to detect the device and vendor ID of the PMP actually connected to the HBA, which means that we can not apply the proper PMP quirks for the PMP that is connected to the HBA. Limiting the port map will thus stop these controllers from working with SATA Port Multipliers. This patch reverts both patches for asm1064 and asm1166, so old behavior is restored and SATA PMP will work again, but it will also reintroduce the (minutes long) extra boot time for the ASMedia controllers that do not have a PMP connected (either on the PCIe card itself, or an external PMP). However, a longer boot time for some, is the lesser evil compared to some other users not being able to detect their drives at all. Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports") Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports") Cc: stable@vger.kernel.org Reported-by: Matt Signed-off-by: Conrad Kostecki Reviewed-by: Hans de Goede [cassel: rewrote commit message] Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin

ahci: asm1064: correct count of reported ports

2024-04-03T13:19:38+00:00

[ Upstream commit 9815e39617541ef52d0dfac4be274ad378c6dc09 ] The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" Signed-off-by: Niklas Cassel Stable-dep-of: 6cd8adc3e189 ("ahci: asm1064: asm1166: don't limit reported ports") Signed-off-by: Sasha Levin

ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts

2024-03-01T12:26:39+00:00

commit 51af8f255bdaca6d501afc0d085b808f67b44d91 upstream. ASMedia have confirmed that all ASM106x parts currently listed in ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran into on the ASM1061, and therefore, we need to apply the quirk added by commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers") to the other supported ASM106x parts as well. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/ Signed-off-by: Lennert Buytenhek [cassel: add link to ASMedia confirmation email] Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

ata: ahci: add identifiers for ASM2116 series adapters

2024-03-01T12:26:39+00:00

commit 3bf6141060948e27b62b13beb216887f2e54591e upstream. Add support for PCIe SATA adapter cards based on Asmedia 2116 controllers. These cards can provide up to 10 SATA ports on PCIe card. Signed-off-by: Szuying Chen Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: ahci_ceva: fix error handling for Xilinx GT PHY support

2024-03-01T12:26:36+00:00

[ Upstream commit 26c8404e162b43dddcb037ba2d0cb58c0ed60aab ] Platform clock and phy error resources are not cleaned up in Xilinx GT PHY error path. To fix introduce the function ceva_ahci_platform_enable_resources() which is a customized version of ahci_platform_enable_resources() and inline with SATA IP programming sequence it does: - Assert SATA reset - Program PS GTR phy - Bring SATA by de-asserting the reset - Wait for GT lane PLL to be locked ceva_ahci_platform_enable_resources() is also used in the resume path as the same SATA programming sequence (as in probe) should be followed. Also cleanup the mixed usage of ahci_platform_enable_resources() and custom implementation in the probe function as both are not required. Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy") Signed-off-by: Radhey Shyam Pandey Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin

ata: libata-core: Do not try to set sleeping devices to standby

2024-03-01T12:26:31+00:00

commit 4b085736e44dbbe69b5eea1a8a294f404678a1f4 upstream. In ata ata_dev_power_set_standby(), check that the target device is not sleeping. If it is, there is no need to do anything. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman