kernel/linux.git/drivers/ata, branch v5.15.219

ata: pata_sl82c105: fix bridge revision use-after-free

2026-08-19T15:14:14+00:00

[ Upstream commit 7700a31039cdc6715cb6cce7e7a664ee4e945f67 ] pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. Fixes: 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") Signed-off-by: Hongyan Xu Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning

2026-08-19T15:13:54+00:00

[ Upstream commit c2130f6553f4a5cbdc259de069600117a995f197 ] The hand-rolled bit-scanning loop in the NCQ completion path has an infinite loop bug. When tag_mask has only high bits set (e.g. 0x80000000), the inner while loop left-shifts tag_mask until it overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1 stays 0, causing an infinite loop in hardirq context with a spinlock held. Replace the open-coded bit-scanning with __ffs() which correctly finds the least significant set bit and is bounded by the width of the argument. Fixes: 62936009f35a ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: sata_dwc_460ex: remove variable num_processed

2026-08-19T15:13:54+00:00

[ Upstream commit de58fd3d80f884f7f322a06bfe08465e49b47c5d ] Variable num_processed is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King Signed-off-by: Damien Le Moal Stable-dep-of: c2130f6553f4 ("ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning") Signed-off-by: Sasha Levin

ata: sata_dwc_460ex: fix clear_interrupt_bit() clearing all pending interrupts

2026-08-19T15:13:54+00:00

[ Upstream commit 66c4e310ad71f41e41736d33dd8a1fb5eaaec7f3 ] clear_interrupt_bit() ignores the bit argument and performs a read-write-back of the entire INTPR register. If INTPR uses standard Write-1-to-Clear semantics, this clears every pending interrupt bit, not just the intended one. Coalesced interrupts (e.g. DMAT + NEWFP) would be cleared together, silently losing the second event. Write only the specific bit to clear so that other pending interrupts are preserved. Fixes: 62936009f35a ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered

2026-08-19T15:13:53+00:00

[ Upstream commit 4bbc16a353a98023e5ddfca7c1fc0e49971cf4d0 ] sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. Fixes: 62936009f35a ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: pata_pxa: Fix DMA channel leak on probe error

2026-07-24T13:51:54+00:00

commit fcaf242e7fc406e78f444a35441e3b58f5e28781 upstream. When dmaengine_slave_config() fails, the DMA channel acquired by dma_request_chan() is not released before returning the error, leaking the channel reference. Fix by adding dma_release_channel() in the error path. The ata_host_activate() error path already correctly releases the DMA channel. Cc: stable@vger.kernel.org Fixes: 88622d80af82 ("ata: pata_pxa: dmaengine conversion") Signed-off-by: Wentao Liang Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: sata_gemini: unwind clocks on IDE pinctrl errors

2026-07-24T13:51:43+00:00

[ Upstream commit c0ace4130e813acbabdfaa28d4e94a849c2ffdd7 ] gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then disables them again while keeping the clocks prepared for later bridge start and stop operations. If gemini_setup_ide_pins() fails after that, gemini_sata_probe() returns directly and skips the existing out_unprep_clk unwind path. Route the IDE pinctrl failure through out_unprep_clk so the clocks prepared by gemini_sata_bridge_init() are unprepared before probe fails. Fixes: d872ced29d5f ("ata: sata_gemini: Introduce explicit IDE pin control") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Niklas Cassel Reviewed-by: Linus Walleij Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585

2026-06-01T15:35:01+00:00

[ Upstream commit 105c42566a550e2d05fc14f763216a8765ee5d0e ] The JMicron JMB585 (and JMB582) SATA controllers advertise 64-bit DMA support via the S64A bit in the AHCI CAP register, but their 64-bit DMA implementation is defective. Under sustained I/O, DMA transfers targeting addresses above 4GB silently corrupt data -- writes land at incorrect memory addresses with no errors logged. The failure pattern is similar to the ASMedia ASM1061 (commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers")), which also falsely advertised full 64-bit DMA support. However, the JMB585 requires a stricter 32-bit DMA mask rather than 43-bit, as corruption occurs with any address above 4GB. On the Minisforum N5 Pro specifically, the combination of the JMB585's broken 64-bit DMA with the AMD Family 1Ah (Strix Point) IOMMU causes silent data corruption that is only detectable via checksumming filesystems (BTRFS/ZFS scrub). The corruption occurs when 32-bit IOVA space is exhausted and the kernel transparently switches to 64-bit DMA addresses. Add device-specific PCI ID entries for the JMB582 (0x0582) and JMB585 (0x0585) before the generic JMicron class match, using a new board type that combines AHCI_HFLAG_IGN_IRQ_IF_ERR (preserving existing behavior) with AHCI_HFLAG_32BIT_ONLY to force 32-bit DMA masks. Signed-off-by: Arthur Husband Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin

ata: libata-scsi: refactor ata_scsi_translate()

2026-04-18T08:33:07+00:00

[ Upstream commit bb3a8154b1a1dc2c86d037482c0a2cf9186829ed ] Factor out of ata_scsi_translate() the code handling queued command deferral using the port qc_defer callback and issuing the queued command with ata_qc_issue() into the new function ata_scsi_qc_issue(), and simplify the goto used in ata_scsi_translate(). While at it, also add a lockdep annotation to check that the port lock is held when ata_scsi_translate() is called. No functional changes. Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Martin K. Petersen Reviewed-by: John Garry Reviewed-by: Igor Pylypiv Signed-off-by: Sasha Levin

ata: libata: remove pointless VPRINTK() calls

2026-04-18T08:33:07+00:00

[ Upstream commit e1553351d747cbcd62db01d579dff916edcc782c ] Most of the information is already covered by tracepoints (if not downright pointless), so remove the VPRINTK() calls. And while we're at it, remove ata_scsi_dump_cdb(), too, as this information can be retrieved from scsi tracing. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal Stable-dep-of: bb3a8154b1a1 ("ata: libata-scsi: refactor ata_scsi_translate()") Signed-off-by: Sasha Levin