kernel/linux.git/drivers/ata, branch v4.4.8

pata-rb532-cf: get rid of the irq_to_gpio() call

2016-03-09T23:34:53+00:00

commit 018361767a21fb2d5ebd3ac182c04baf8a8b4e08 upstream. The RB532 platform specific irq_to_gpio() implementation has been removed with commit 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h"). Now the platform uses the generic stub which causes the following error: pata-rb532-cf pata-rb532-cf: no GPIO found for irq149 pata-rb532-cf: probe of pata-rb532-cf failed with error -2 Drop the irq_to_gpio() call and get the GPIO number from platform data instead. After this change, the driver works again: scsi host0: pata-rb532-cf ata1: PATA max PIO4 irq 149 ata1.00: CFA: CF 1GB, 20080820, max MWDMA4 ata1.00: 1989792 sectors, multi 0: LBA ata1.00: configured for PIO4 scsi 0:0:0:0: Direct-Access ATA CF 1GB 0820 PQ: 0\ ANSI: 5 sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\ support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Cc: Alban Bedel Cc: Ralf Baechle Cc: Arnd Bergmann Signed-off-by: Gabor Juhos Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ata: ahci: don't mark HotPlugCapable Ports as external/removable

2016-03-09T23:34:52+00:00

commit dc8b4afc4a04fac8ee55a19b59f2356a25e7e778 upstream. The HPCP bit is set by bioses for on-board sata ports either because they think sata is hotplug capable in general or to allow Windows to display a "device eject" icon on ports which are routed to an external connector bracket. However in Redhat Bugzilla #1310682, users report that with kernel 4.4, where this bit test first appeared, a lot of partitions on sata drives are now mounted automatically. This patch should fix redhat and a lot of other distros which unconditionally automount all devices which have the "removable" bit set. Signed-off-by: Manuel Lauss Signed-off-by: Tejun Heo Fixes: 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior) Link: http://lkml.kernel.org/g/56CF35FA.1070500@redhat.com Signed-off-by: Greg Kroah-Hartman

Adding Intel Lewisburg device IDs for SATA

2016-03-09T23:34:52+00:00

commit f5bdd66c705484b4bc77eb914be15c1b7881fae7 upstream. This patch complements the list of device IDs previously added for lewisburg sata. Signed-off-by: Alexandra Yates Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: fix HDIO_GET_32BIT ioctl

2016-03-09T23:34:52+00:00

commit 287e6611ab1eac76c2c5ebf6e345e04c80ca9c61 upstream. As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not work correctly in compat mode with libata. I have investigated the issue further and found multiple problems that all appeared with the same commit that originally introduced HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy a 'long' variable containing either 0 or 1 to user space. The problems with this are: * On big-endian machines, this will always write a zero because it stores the wrong byte into user space. * In compat mode, the upper three bytes of the variable are updated by the compat_hdio_ioctl() function, but they now contain uninitialized stack data. * The hdparm tool calling this ioctl uses a 'static long' variable to store the result. This means at least the upper bytes are initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT would fill them with data that remains stale when the low byte is overwritten. Fortunately libata doesn't implement any of the affected ioctl commands, so this would only happen when we query both an IDE and an ATA device in the same command such as "hdparm -N -c /dev/hda /dev/sda" * The libata code for unknown reasons started using ATA_IOC_GET_IO32 and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT, while the ioctl commands that were added later use the normal HDIO_* names. This is harmless but rather confusing. This addresses all four issues by changing the code to use put_user() on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem does, and by clarifying the names of the ioctl commands. Signed-off-by: Arnd Bergmann Reported-by: Soohoon Lee Tested-by: Soohoon Lee Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: fix sff host state machine locking while polling

2016-03-03T23:07:27+00:00

commit 8eee1d3ed5b6fc8e14389567c9a6f53f82bb7224 upstream. The bulk of ATA host state machine is implemented by ata_sff_hsm_move(). The function is called from either the interrupt handler or, if polling, a work item. Unlike from the interrupt path, the polling path calls the function without holding the host lock and ata_sff_hsm_move() selectively grabs the lock. This is completely broken. If an IRQ triggers while polling is in progress, the two can easily race and end up accessing the hardware and updating state machine state at the same time. This can put the state machine in an illegal state and lead to a crash like the following. kernel BUG at drivers/ata/libata-sff.c:1302! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000 RIP: 0010:[] [] ata_sff_hsm_move+0x619/0x1c60 ... Call Trace: [] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584 [] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877 [< inline >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629 [] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902 [] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157 [] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205 [] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623 [< inline >] generic_handle_irq_desc include/linux/irqdesc.h:146 [] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78 [] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240 [] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520 [< inline >] rcu_lock_acquire include/linux/rcupdate.h:490 [< inline >] rcu_read_lock include/linux/rcupdate.h:874 [] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145 [< inline >] do_fault_around mm/memory.c:2943 [< inline >] do_read_fault mm/memory.c:2962 [< inline >] do_fault mm/memory.c:3133 [< inline >] handle_pte_fault mm/memory.c:3308 [< inline >] __handle_mm_fault mm/memory.c:3418 [] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447 [] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238 [] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331 [] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264 [] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986 Fix it by ensuring that the polling path is holding the host lock before entering ata_sff_hsm_move() so that all hardware accesses and state updates are performed under the host lock. Signed-off-by: Tejun Heo Reported-and-tested-by: Dmitry Vyukov Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com Signed-off-by: Greg Kroah-Hartman

ahci: Intel DNV device IDs SATA

2016-02-17T20:31:03+00:00

commit 342decff2b846b46fa61eb5ee40986fab79a9a32 upstream. Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: Alexandra Yates Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: disable forced PORTS_IMPL for >= AHCI 1.3

2016-02-17T20:31:03+00:00

commit 566d1827df2ef0cbe921d3d6946ac3007b1a6938 upstream. Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by: Tejun Heo Reported-by: Andy Lutomirski Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman

ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads

2015-12-07T15:25:57+00:00

Every attempt to issue a read log page command lockup the controller. The command is currently sent if the sata device includes the devlsp feature to read out the timing data. This attempt to read the data, locks up the controller and the device is not recognzied correctly (failed to set xfermode) and cannot be accessed. This was found on Freescale P1013/P1022 and T4240 CPUs using a ATP IG mSATA 4GB with the devslp feature. fsl-sata ff718000.sata: Sata FSL Platform/CSB Driver init [ 1.254195] scsi0 : sata_fsl [ 1.256004] ata1: SATA max UDMA/133 irq 74 [ 1.370666] fsl-gianfar ethernet.3: enabled errata workarounds, flags: 0x4 [ 1.470671] fsl-gianfar ethernet.4: enabled errata workarounds, flags: 0x4 [ 1.775584] ata1: Signature Update detected @ 504 msecs [ 1.947594] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948366] ata1.00: ATA-8: ATP IG mSATA, 20150311, max UDMA/133 [ 1.948371] ata1.00: 7732368 sectors, multi 0: LBA [ 1.948843] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.948857] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.467557] ata1: Signature Update detected @ 504 msecs [ 7.639560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.651320] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 7.651360] ata1.00: failed to set xfermode (err_mask=0x40) [ 7.655628] ata1: limiting SATA link speed to 1.5 Gbps [ 7.659458] ata1.00: limiting speed to UDMA/133:PIO3 [ 13.163554] ata1: Signature Update detected @ 504 msecs [ 13.335558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.347298] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 13.347334] ata1.00: failed to set xfermode (err_mask=0x40) [ 13.351601] ata1.00: disabled [ 13.353278] ata1: exception Emask 0x50 SAct 0x0 SErr 0x800 action 0x6 frozen t4 [ 13.359281] ata1: SError: { HostInt } [ 13.361644] ata1: hard resetting link Signed-off-by: Andreas Werner Signed-off-by: Tejun Heo

libata-eh.c: Introduce new ata port flag for controller which lockup on read log page

2015-12-07T15:25:57+00:00

Some controller lockup on a ata_read_log_page. Add new ata port flag ATA_FLAG_NO_LOG_PAGE which can used to blacklist a controller. If this flag is set, any attempt to read a log page returns an error without actually issuing the command. Signed-off-by: Andreas Werner Signed-off-by: Tejun Heo

sata_sil: disable trim

2015-11-30T15:02:49+00:00

When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by: Mikulas Patocka Cc: stable@kernel.org Signed-off-by: Tejun Heo