kernel/linux.git/drivers/ata, branch v3.4.84

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001)

2014-03-24T04:37:06+00:00

commit b28a613e9138e4b3a64649bd60b13436f4b4b49b upstream. Via commit 87809942d3fa "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8" we added a quirk for disks named "ST1000LM024 HN-M101MBB" with firmware revision "2AR10001". As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901, we need to also add firmware revision 2BA30001 as it is broken as well. Reported-by: Nicholas Signed-off-by: Michele Baldessari Tested-by: Guilherme Amadio Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN

2014-03-11T23:10:00+00:00

commit 9f9c47f00ce99329b1a82e2ac4f70f0fe3db549c upstream. It's a bit odd to see a newer device showing mod15write; however, the reported behavior is highly consistent and other factors which could contribute seem to have been verified well enough. Also, both sata_sil itself and the drive are fairly outdated at this point making the risk of this change fairly low. It is possible, probably likely, that other drive models in the same family have the same problem; however, for now, let's just add the specific model which was tested. Signed-off-by: Tejun Heo Reported-by: matson References: http://lkml.kernel.org/g/201401211912.s0LJCk7F015058@rs103.luxsci.com Signed-off-by: Greg Kroah-Hartman

ata: enable quirk from jmicron JMB350 for JMB394

2014-03-11T23:10:00+00:00

commit efb9e0f4f43780f0ae0c6428d66bd03e805c7539 upstream. Without the patch the kernel generates the following error. ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123' ata11.15: PMP revalidation failed (errno=-19) ata11.15: failed to recover PMP after 5 tries, giving up This patch helps to bypass this error and the device becomes functional. Signed-off-by: Denis V. Lunev Signed-off-by: Tejun Heo Cc: Signed-off-by: Greg Kroah-Hartman

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8

2014-01-08T17:42:11+00:00

commit 87809942d3fa60bafb7a58d0bdb1c79e90a6821d upstream. We've received multiple reports in Fedora via (BZ 907193) that the Seagate Momentus SpinPoint M8 errors out when enabling AA: [ 2.555905] ata2.00: failed to enable AA (error_mask=0x1) [ 2.568482] ata2.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. Reported-by: Nicholas Signed-off-by: Michele Baldessari Tested-by: Nicholas Acked-by: Alan Cox Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs

2013-12-12T06:34:11+00:00

commit 29e674dd5c8e781589f09c3ee139c80f6da274e4 upstream. This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik Cc: Ong Boon Leong Signed-off-by: Greg Kroah-Hartman

ahci: Add Device IDs for Intel Lynx Point-LP PCH

2013-12-12T06:34:11+00:00

commit 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik Cc: Ong Boon Leong Signed-off-by: Greg Kroah-Hartman

ahci: add Marvell 9230 to the AHCI PCI device list

2013-12-04T18:50:22+00:00

commit 6d5278a68a75891db1df5ae1ecf83d288fc58c65 upstream. Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by: Samir Benmendil Signed-off-by: Tejun Heo Reviewed-by: Levente Kurusa Signed-off-by: Greg Kroah-Hartman

ahci: disabled FBS prior to issuing software reset

2013-12-04T18:50:15+00:00

commit 89dafa20f3daab5b3e0c13d0068a28e8e64e2102 upstream. Tested with Marvell 88se9125, attached with one port mulitplier(5 ports) and one disk, we will get following boot log messages if using current code: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f ahci 0000:03:00.0: FBS is enabled ata8.00: hard resetting link ata8.00: SATA link down (SStatus 0 SControl 330) ata8.01: hard resetting link ata8.01: SATA link down (SStatus 0 SControl 330) ata8.02: hard resetting link ata8.02: SATA link down (SStatus 0 SControl 330) ata8.03: hard resetting link ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133) ata8.04: hard resetting link ata8.04: failed to resume link (SControl 133) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 1 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.03: native sectors (2) is smaller than sectors (976773168) ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133 ata8.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.03: configured for UDMA/133 ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: limiting SATA link speed to 3.0 Gbps ata8.15: hard resetting link ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: failed to recover PMP after 5 tries, giving up ata8.15: Port Multiplier detaching ata8.03: disabled ata8.00: disabled ata8: EH complete The reason is that current detection code doesn't follow AHCI spec: First,the port multiplier detection process look like this: ahci_hardreset(link, class, deadline) if (class == ATA_DEV_PMP) { sata_pmp_attach(dev) /* will enable FBS */ sata_pmp_init_links(ap, nr_ports); ata_for_each_link(link, ap, EDGE) { sata_std_hardreset(link, class, deadline); if (link_is_online) /* do soft reset */ ahci_softreset(link, class, deadline); } } But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to '0'. The patch test ok with kernel 3.11.1. tj: Patch white space contaminated, applied manually with trivial updates. Signed-off-by: Xiangliang Yu Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive

2013-12-04T18:50:14+00:00

commit 0523f037f65dba10191b0fa9c51266f90ba64630 upstream. The "Slimtype DVD A DS8A9SH" drive locks up with following backtrace when the max sector is smaller than 65535 bytes, fix it by adding a quirk to set the max sector to 65535 bytes. INFO: task flush-11:0:663 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-11:0 D 00000000ffff5ceb 0 663 2 0x00000000 ffff88026d3b1710 0000000000000046 0000000000000001 0000000000000000 ffff88026f2530c0 ffff88026d365860 ffff88026d3b16e0 ffffffff812ffd52 ffff88026d4fd3d0 0000000100000001 ffff88026d3b16f0 ffff88026d3b1fd8 Call Trace: [] ? cfq_may_queue+0x52/0xf0 [] schedule+0x18/0x30 [] io_schedule+0x42/0x60 [] get_request_wait+0xeb/0x1f0 [] ? autoremove_wake_function+0x0/0x40 [] ? elv_merge+0x42/0x210 [] __make_request+0x8e/0x4e0 [] generic_make_request+0x21e/0x5e0 [] submit_bio+0x5d/0xd0 [] submit_bh+0xf2/0x130 [] __block_write_full_page+0x1dc/0x3a0 [] ? end_buffer_async_write+0x0/0x120 [] ? blkdev_get_block+0x0/0x70 [] ? blkdev_get_block+0x0/0x70 [] ? end_buffer_async_write+0x0/0x120 [] block_write_full_page_endio+0xde/0x100 [] block_write_full_page+0x10/0x20 [] blkdev_writepage+0x13/0x20 [] __writepage+0x15/0x40 [] write_cache_pages+0x1cf/0x3e0 [] ? __writepage+0x0/0x40 [] generic_writepages+0x22/0x30 [] do_writepages+0x1f/0x40 [] writeback_single_inode+0xe7/0x3b0 [] writeback_sb_inodes+0x184/0x280 [] writeback_inodes_wb+0x6b/0x1a0 [] wb_writeback+0x23b/0x2a0 [] wb_do_writeback+0x17d/0x190 [] bdi_writeback_task+0x4b/0xe0 [] ? bdi_start_fn+0x0/0x100 [] bdi_start_fn+0x81/0x100 [] ? bdi_start_fn+0x0/0x100 [] kthread+0x8e/0xa0 [] ? finish_task_switch+0x54/0xc0 [] kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0xa0 [] ? kernel_thread_helper+0x0/0x10 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" Signed-off-by: Shan Hai Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: Fix display of sata speed

2013-12-04T18:50:14+00:00

commit 3e85c3ecbc520751324a191d23bb94873ed01b10 upstream. 6.0 Gbps link speed was not decoded properly: speed was reported at 3.0 Gbps only. Tested: On a machine where libata reports 6.0 Gbps in /var/log/messages: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Before: cat /sys/class/ata_link/link1/sata_spd 3.0 Gbps After: cat /sys/class/ata_link/link1/sata_spd 6.0 Gbps Signed-off-by: Gwendal Grignou Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman