kernel/linux.git/drivers/ata, branch v3.4.105

ahci: add pcid for Marvel 0x9182 controller

2014-12-01T10:02:26+00:00

commit c5edfff9db6f4d2c35c802acb4abe0df178becee upstream. Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by: Murali Karicheri Signed-off-by: Tejun Heo Cc: Santosh Shilimkar [lizf: Backported to 3.4: - adjust context - s/PCI_VENDOR_ID_MARVELL_EXT/0x1b4b/] Signed-off-by: Zefan Li

ata_piix: Add Device IDs for Intel 9 Series PCH

2014-12-01T10:02:24+00:00

commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream. This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by: James Ralston Signed-off-by: Tejun Heo Signed-off-by: Zefan Li

ahci: Add Device IDs for Intel 9 Series PCH

2014-12-01T10:02:24+00:00

commit 1b071a0947dbce5c184c12262e02540fbc493457 upstream. This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by: James Ralston Signed-off-by: Tejun Heo Signed-off-by: Zefan Li

pata_scc: propagate return value of scc_wait_after_reset

2014-09-25T03:49:11+00:00

commit 4dc7c76cd500fa78c64adfda4b070b870a2b993c upstream. scc_bus_softreset not necessarily should return zero. Propagate the error code. Signed-off-by: Arjun Sreedharan Signed-off-by: Tejun Heo Signed-off-by: Zefan Li

ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

2014-07-31T19:54:52+00:00

commit b32bfc06aefab61acc872dec3222624e6cd867ed upstream. Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by: Romain Degez Tested-by: Romain Degez Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: introduce ata_host->n_tags to avoid oops on SAS controllers

2014-07-31T19:54:51+00:00

commit 1a112d10f03e83fb3a2fdc4c9165865dec8a3ca6 upstream. 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32") directly used ata_port->scsi_host->can_queue from ata_qc_new() to determine the number of tags supported by the host; unfortunately, SAS controllers doing SATA don't initialize ->scsi_host leading to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [] ata_qc_new_init+0x188/0x1b0 PGD 0 Oops: 0002 [#1] SMP Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000 RIP: 0010:[] [] ata_qc_new_init+0x188/0x1b0 RSP: 0018:ffff88061a003ae8 EFLAGS: 00010012 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000 FS: 00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0 Stack: ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200 ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68 ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80 Call Trace: [] ata_sas_queuecmd+0xa1/0x430 [] sas_queuecommand+0x191/0x220 [libsas] [] scsi_dispatch_cmd+0x10e/0x300 [] scsi_request_fn+0x2f5/0x550 [] __blk_run_queue+0x33/0x40 [] queue_unplugged+0x2a/0x90 [] blk_flush_plug_list+0x1b4/0x210 [] blk_finish_plug+0x14/0x50 [] __do_page_cache_readahead+0x198/0x1f0 [] force_page_cache_readahead+0x31/0x50 [] page_cache_sync_readahead+0x3e/0x50 [] generic_file_read_iter+0x496/0x5a0 [] blkdev_read_iter+0x37/0x40 [] new_sync_read+0x7e/0xb0 [] vfs_read+0x94/0x170 [] SyS_read+0x46/0xb0 [] ? SyS_lseek+0x91/0xb0 [] system_call_fastpath+0x16/0x1b Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00 Fix it by introducing ata_host->n_tags which is initialized to ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to scsi_host_template->can_queue in ata_host_register() for !SAS ones. As SAS hosts are never registered, this will give them the same ATA_MAX_QUEUE - 1 as before. Note that we can't use scsi_host->can_queue directly for SAS hosts anyway as they can go higher than the libata maximum. Signed-off-by: Tejun Heo Reported-by: Mike Qiu Reported-by: Jesse Brandeburg Reported-by: Peter Hurley Reported-by: Peter Zijlstra Tested-by: Alexey Kardashevskiy Fixes: 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32") Cc: Kevin Hao Cc: Dan Williams Signed-off-by: Greg Kroah-Hartman

libata: support the ata host which implements a queue depth less than 32

2014-07-31T19:54:51+00:00

commit 1871ee134b73fb4cadab75752a7152ed2813c751 upstream. The sata on fsl mpc8315e is broken after the commit 8a4aeec8d2d6 ("libata/ahci: accommodate tag ordered controllers"). The reason is that the ata controller on this SoC only implement a queue depth of 16. When issuing the commands in tag order, all the commands in tag 16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata malfunction. It makes no senses to use a 32 queue in software while the hardware has less queue depth. So consider the queue depth implemented by the hardware when requesting a command tag. Fixes: 8a4aeec8d2d6 ("libata/ahci: accommodate tag ordered controllers") Signed-off-by: Kevin Hao Acked-by: Dan Williams Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: Add Device ID for HighPoint RocketRaid 642L

2014-06-16T20:45:46+00:00

commit d251836508fb26cd1a22b41381739835ee23728d upstream. This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by: Jérôme Carretero Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ata_piix: Add Device IDs for Intel Lynx Point-LP PCH

2014-06-07T23:02:14+00:00

commit 389cd784969e9148fedcde0608f15bd74d6b769e upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik Signed-off-by: Ben Hutchings Cc: Qiang Huang Signed-off-by: Greg Kroah-Hartman

pata_at91: fix ata_host_activate() failure handling

2014-06-07T23:02:00+00:00

commit 27aa64b9d1bd0d23fd692c91763a48309b694311 upstream. Add missing clk_put() call to ata_host_activate() failure path. Sergei says, "Hm, I have once fixed that (see that *if* (!ret)) but looks like a later commit 477c87e90853d136b188c50c0e4a93d01cad872e (ARM: at91/pata: use gpio_is_valid to check the gpio) broke it again. :-( Would be good if the changelog did mention that..." Cc: Andrew Victor Cc: Nicolas Ferre Cc: Jean-Christophe Plagniol-Villard Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman