kernel/linux.git/drivers/ata, branch linux-5.11.y

ata: ahci_brcm: Fix use of BCM7216 reset controller

2021-05-19T08:29:44+00:00

[ Upstream commit e8d6f9e56187c101b325e8d18f1d4032420d08ff ] This driver may use one of two resets controllers. Keep them in separate variables to keep things simple. The reset controller "rescal" is shared between the AHCI driver and the PCIe driver for the BrcmSTB 7216 chip. Use devm_reset_control_get_optional_shared() to handle this sharing. [bhelgaas: add Jens' ack from v5 posting] Fixes: 272ecd60a636 ("ata: ahci_brcm: BCM7216 reset is self de-asserting") Fixes: c345ec6a50e9 ("ata: ahci_brcm: Support BCM7216 reset controller name") Link: https://lore.kernel.org/r/20210430152156.21162-3-jim2101024@gmail.com Signed-off-by: Jim Quinlan Signed-off-by: Bjorn Helgaas Acked-by: Jens Axboe Acked-by: Florian Fainelli Signed-off-by: Sasha Levin

ata: libahci_platform: fix IRQ check

2021-05-14T08:49:54+00:00

[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ] Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0 early (as if the call was successful). Override IRQ0 with -EINVAL instead as the 'libata' regards 0 as "no IRQ" (thus polling) anyway... Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

sata_mv: add IRQ checks

2021-05-14T08:49:54+00:00

[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ] The function mv_platform_probe() neglects to check the results of the calls to platform_get_irq() and irq_of_parse_and_map() and blithely passes them to ata_host_activate() -- while the latter only checks for IRQ0 (treating it as a polling mode indicattion) and passes the negative values to devm_request_irq() causing it to fail as it takes unsigned values for the IRQ #... Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ #s to ata_host_activate(), propagate upstream the negative error codes, and override the IRQ0 with -EINVAL (as we don't want the polling mode). Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pata_ipx4xx_cf: fix IRQ check

2021-05-14T08:49:54+00:00

[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ] The driver's probe() method is written as if platform_get_irq() returns 0 on error, while actually it returns a negative error code (with all the other values considered valid IRQs). Rewrite the driver's IRQ checking code to pass the positive IRQ #s to ata_host_activate(), propagate errors upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code treats 0 as an indication that polling should be used anyway... Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pata_arasan_cf: fix IRQ check

2021-05-14T08:49:54+00:00

[ Upstream commit c7e8f404d56b99c80990b19a402c3f640d74be05 ] The driver's probe() method is written as if platform_get_irq() returns 0 on error, while actually it returns a negative error code (with all the other values considered valid IRQs). Rewrite the driver's IRQ checking code to pass the positive IRQ #s to ata_host_activate(), propagate upstream -EPROBE_DEFER, and set up the driver to polling mode on (negative) errors and IRQ0 (libata treats IRQ #0 as a polling mode anyway)... Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller") Signed-off-by: Sergey Shtylyov Acked-by: Viresh Kumar Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci: Disable SXS for Hisilicon Kunpeng920

2021-05-12T06:37:24+00:00

[ Upstream commit 234e6d2c18f5b080cde874483c4c361f3ae7cffe ] On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of SATA controller. In some scenarios, some ports are not external SATA ports, and it cause disks connected to these ports to be identified as removable disks. So disable the SXS capability on the software side to prevent users from mistakenly considering non-removable disks as removable disks and performing related operations. Signed-off-by: Xingui Yang Signed-off-by: Luo Jiaxing Reviewed-by: John Garry Link: https://lore.kernel.org/r/1615544676-61926-1-git-send-email-luojiaxing@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci_brcm: Add back regulators management

2021-03-04T11:14:19+00:00

[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ] While reworking the resources management and departing from using ahci_platform_enable_resources() which did not allow a proper step separation like we need, we unfortunately lost the ability to control AHCI regulators. This broke some Broadcom STB systems that do expect regulators to be turned on to link up with attached hard drives. Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management") Signed-off-by: Florian Fainelli Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

Merge tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block

2020-10-30T21:51:01+00:00

Pull libata fix from Jens Axboe: "Single fix for an old regression with sata_nv" * tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block: ata: sata_nv: Fix retrieving of active qcs

ata: sata_nv: Fix retrieving of active qcs

2020-10-28T13:58:09+00:00

ata_qc_complete_multiple() has to be called with the tags physically active, that is the hw tag is at bit 0. ap->qc_active has the same tag at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that up. This is done in the vein of 8385d756e114 ("libata: Fix retrieving of active qcs"). Fixes: 28361c403683 ("libata: add extra internal command") Tested-by: Pali Rohár Signed-off-by: Sascha Hauer Signed-off-by: Jens Axboe

Merge branch 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

2020-10-25T17:59:34+00:00

Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time