kernel/linux.git/drivers/ata/pata_serverworks.c, branch v7.1

ata: pata_serverworks: Do not use the term blacklist

2024-07-29T22:10:08+00:00

Let's not use the term blacklist in the function serverworks_osb4_filter() documentation comment and rather simply refer to what that function looks at: the list of devices with groken UDMA5. While at it, also constify the values of the csb_bad_ata100 array. Of note is that all of this should probably be handled using libata quirk mechanism but it is unclear if these UDMA5 quirks are specific to this controller only. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Igor Pylypiv

scsi: ata: Declare SCSI host templates const

2023-03-24T23:19:19+00:00

Make it explicit that ATA host templates are not modified. Reviewed-by: Linus Walleij Acked-by: Damien Le Moal Reviewed-by: Serge Semin (for DWC AHCI SATA) Reviewed-by: John Garry Reviewed-by: Jon Hunter (for Tegra) Cc: Christoph Hellwig Cc: Ming Lei Cc: Hannes Reinecke Cc: John Garry Cc: Mike Christie Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230322195515.1267197-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen

ata: make transfer mode masks unsigned int

2022-06-17T07:35:02+00:00

The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields of *struct*s ata_device and ata_port_info are declared as *unsigned long* (which is a 64-bit type on 64-bit architectures) but actually the packed masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes) and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can safely use (always 32-bit) *unsigned int* variables instead. This saves 745 bytes of object code in libata-core.o alone, not to mention LLDDs... Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: pata_serverworks: convert printk() calls

2022-01-05T10:33:03+00:00

Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht

2021-06-16T12:50:26+00:00

Fixes the following W=1 kernel build warning(s): drivers/ata/pata_serverworks.c:257:18: warning: initialized field overwritten [-Woverride-init] drivers/ata/pata_serverworks.c:257:18: note: (near initialization for ‘serverworks_osb4_sht.sg_tablesize’) Cc: Jens Axboe Cc: Andre Hedrick Cc: linux-ide@vger.kernel.org Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210528090502.1799866-11-lee.jones@linaro.org Signed-off-by: Jens Axboe

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller

2014-10-07T21:10:14+00:00

The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211) does not support 64-KB DMA transfers. Whenever a 64-KB DMA transfer is attempted, the transfer fails and messages similar to the following are written to the console log: [ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code [ 2431.851139] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2431.851152] sr 0:0:0:0: [sr0] Sense Key : Hardware Error [current] [ 2431.851166] sr 0:0:0:0: [sr0] Add. Sense: Logical unit communication time-out [ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00 [ 2431.851210] end_request: I/O error, dev sr0, sector 121808 When the libata and pata_serverworks modules are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h, the 64-KB transfer size in the scatter-gather list can be seen in the console log: [ 2664.897267] sr 9:0:0:0: [sr0] Send: [ 2664.897274] 0xf63d85e0 [ 2664.897283] sr 9:0:0:0: [sr0] CDB: [ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00 [ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700 [ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40 [ 2664.897338] ata_scsi_translate: ENTER [ 2664.897345] ata_sg_setup: ENTER, ata1 [ 2664.897356] ata_sg_setup: 3 sg elements mapped [ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000) [ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000) ------------------------------------------------------> ======= [ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000) [ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1 [ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC [ 2664.897428] ata_sff_tf_load: device 0xA0 [ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0 [ 2664.897457] ata_scsi_translate: EXIT [ 2664.897462] leaving scsi_dispatch_cmnd() [ 2664.897497] Doing sr request, dev = sr0, block = 0 [ 2664.897507] sr0 : reading 64/256 512 byte blocks. [ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58) [ 2664.897560] atapi_send_cdb: send cdb [ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64 [ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3 [ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51) [ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51) [ 2666.910129] sr 9:0:0:0: [sr0] Done: [ 2666.910136] 0xf63d85e0 TIMEOUT lspci shows that the driver used for the Broadcom OSB4 IDE Controller is pata_serverworks: 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=4] I/O ports at 1440 [size=16] Kernel driver in use: pata_serverworks The pata_serverworks driver supports five distinct device IDs, one being the OSB4 and the other four belonging to the CSB series. The CSB series appears to support 64-KB DMA transfers, as tests on a machine with an SAI2 motherboard containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212) showed no problems with 64-KB DMA transfers. This problem was first discovered when attempting to install openSUSE from a DVD on a machine with an STL2 motherboard. Using the pata_serverworks module, older releases of openSUSE will not install at all due to the timeouts. Releases of openSUSE prior to 11.3 can be installed by disabling the pata_serverworks module using the brokenmodules boot parameter, which causes the serverworks module to be used instead. Recent releases of openSUSE (12.2 and later) include better error recovery and will install, though very slowly. On all openSUSE releases, the problem can be recreated on a machine containing a Broadcom OSB4 IDE Controller by mounting an install DVD and running a command similar to the following: find /mnt -type f -print | xargs cat > /dev/null The patch below corrects the problem. Similar to the other ATA drivers that do not support 64-KB DMA transfers, the patch changes the ata_port_operations qc_prep vector to point to a routine that breaks any 64-KB segment into two 32-KB segments and changes the scsi_host_template sg_tablesize element to reduce by half the number of scatter/gather elements allowed. These two changes affect only the OSB4. Signed-off-by: Scott Carter Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-10T02:37:49+00:00

This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable. Benefits of this change: * unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n and CONFIG_PM_RUNTIME=y configurations * easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in the future * more consistent code (there are host drivers which are using the correct CONFIG_PM_SLEEP checks already) The patch leaves the core libata code and ->port_[suspend,resume] support in sata_[inic162x,nv,sil24].c alone for now. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo

ata: delete non-required instances of include

2014-02-13T21:40:56+00:00

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: linux-ide@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Tejun Heo