kernel/linux.git/drivers/ata/libata-core.c, branch v5.10.257

ata: libata: remove pointless VPRINTK() calls

2026-04-18T08:30:59+00:00

[ Upstream commit e1553351d747cbcd62db01d579dff916edcc782c ] Most of the information is already covered by tracepoints (if not downright pointless), so remove the VPRINTK() calls. And while we're at it, remove ata_scsi_dump_cdb(), too, as this information can be retrieved from scsi tracing. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal Stable-dep-of: bb3a8154b1a1 ("ata: libata-scsi: refactor ata_scsi_translate()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ata: libata: Fix memory leak for error path in ata_host_alloc()

2024-09-12T09:06:43+00:00

commit 284b75a3d83c7631586d98f6dede1d90f128f0db upstream. In ata_host_alloc(), if devres_alloc() fails to allocate the device host resource data pointer, the already allocated ata_host structure is not freed before returning from the function. This results in a potential memory leak. Call kfree(host) before jumping to the error handling path to ensure that the ata_host structure is properly freed if devres_alloc() fails. Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host") Cc: stable@vger.kernel.org Signed-off-by: Zheng Qixing Reviewed-by: Yu Kuai Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix null pointer dereference on error

2024-09-04T11:17:45+00:00

commit 5d92c7c566dc76d96e0e19e481d926bbe6631c1e upstream. If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally. Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: John Garry Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Oleksandr Tymoshenko Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix double free on error

2024-07-05T07:12:55+00:00

commit ab9e0c529eb7cafebdd31fe1644524e80a48b05d upstream. If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c496381 ("libata: ensure host is free'd on error exit paths") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Do not register PM operations for SAS ports

2023-10-10T19:53:35+00:00

commit 75e2bd5f1ede42a2bc88aa34b431e1ace8e0bea0 upstream. libsas does its own domain based power management of ports. For such ports, libata should not use a device type defining power management operations as executing these operations for suspend/resume in addition to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is not necessary (and likely dangerous to do, even though problems are not seen currently). Introduce the new ata_port_sas_type device_type for ports managed by libsas. This new device type is used in ata_tport_add() and is defined without power management operations. Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: John Garry Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix port and device removal

2023-10-10T19:53:35+00:00

commit 84d76529c650f887f1e18caee72d6f0589e1baf9 upstream. Whenever an ATA adapter driver is removed (e.g. rmmod), ata_port_detach() is called repeatedly for all the adapter ports to remove (unload) the devices attached to the port and delete the port device itself. Removing of devices is done using libata EH with the ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute ata_eh_unload() which disables all devices attached to the port. ata_port_detach() finishes by calling scsi_remove_host() to remove the scsi host associated with the port. This function will trigger the removal of all scsi devices attached to the host and in the case of disks, calls to sd_shutdown() which will flush the device write cache and stop the device. However, given that the devices were already disabled by ata_eh_unload(), the synchronize write cache command and start stop unit commands fail. E.g. running "rmmod ahci" with first removing sd_mod results in error messages like: ata13.00: disable device sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Fix this by removing all scsi devices of the ata devices connected to the port before scheduling libata EH to disable the ATA devices. Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix ata_port_request_pm() locking

2023-10-10T19:53:35+00:00

commit 3b8e0af4a7a331d1510e963b8fd77e2fca0a77f1 upstream. The function ata_port_request_pm() checks the port flag ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to ensure that power management operations for a port are not scheduled simultaneously. However, this flag check is done without holding the port lock. Fix this by taking the port lock on entry to the function and checking the flag under this lock. The lock is released and re-taken if ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first call is racy and the second one done without holding the port lock. Fixes: 5ef41082912b ("ata: add ata port system PM callbacks") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Reviewed-by: Bart Van Assche Signed-off-by: Greg Kroah-Hartman

ata: libata: Fix sata_down_spd_limit() when no link speed is reported

2023-02-15T16:22:13+00:00

[ Upstream commit 69f2c9346313ba3d3dfa4091ff99df26c67c9021 ] Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") changed the behavior of sata_down_spd_limit() to return doing nothing if a drive does not report a current link speed, to avoid reducing the link speed to the lowest 1.5 Gbps speed. However, the change assumed that a speed was recorded before probing (e.g. before a suspend/resume) and set in link->sata_spd. This causes problems with adapters/drives combination failing to establish a link speed during probe autonegotiation. One example reported of this problem is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation fails, leaving no recorded link speed and no reported current link speed. Probe retries also fail as no action is taken by sata_set_spd() after each retry. Fix this by returning early in sata_down_spd_limit() only if we do have a recorded link speed, that is, if link->sata_spd is not 0. With this fix, a failed probe not leading to a recorded link speed is retried at the lower 1.5 Gbps speed, with the link speed potentially increased later on the second revalidate of the device if the device reports that it supports higher link speeds. Reported-by: Marius Dinu Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") Reviewed-by: Niklas Cassel Tested-by: Marius Dinu Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205

2022-10-05T08:38:39+00:00

commit ea08aec7e77bfd6599489ec430f9f859ab84575a upstream. Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") added an explicit entry for AMD Green Sardine AHCI controller using the board_ahci_mobile configuration (this configuration has later been renamed to board_ahci_low_power). The board_ahci_low_power configuration enables support for low power modes. This explicit entry takes precedence over the generic AHCI controller entry, which does not enable support for low power modes. Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") was backported to stable kernels, it make some Pioneer optical drives, which was working perfectly fine before the commit was backported, stop working. The real problem is that the Pioneer optical drives do not handle low power modes correctly. If these optical drives would have been tested on another AHCI controller using the board_ahci_low_power configuration, this issue would have been detected earlier. Unfortunately, the board_ahci_low_power configuration is only used in less than 15% of the total AHCI controller entries, so many devices have never been tested with an AHCI controller with low power modes. Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") Cc: stable@vger.kernel.org Reported-by: Jaap Berkhout Signed-off-by: Niklas Cassel Reviewed-by: Mario Limonciello Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

2022-06-22T12:13:14+00:00

[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ] In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin