kernel/linux.git/drivers/ata/libahci_platform.c, branch v5.10.257

ata: libahci_platform: Sanity check the DT child nodes number

2022-10-26T11:25:53+00:00

[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ] Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical from the further AHCI-platform initialization point of view since exceeding the ports upper limit will cause allocating more resources than will be used afterwards. But detecting too many child DT-nodes doesn't seem right since it's very unlikely to have it on an ordinary platform. In accordance with the AHCI specification there can't be more than 32 ports implemented at least due to having the CAP.NP field of 5 bits wide and the PI register of dword size. Thus if such situation is found the DTB must have been corrupted and the data read from it shouldn't be reliable. Let's consider that as an erroneous situation and halt further resources allocation. Note it's logically more correct to have the nports set only after the initialization value is checked for being sane. So while at it let's make sure nports is assigned with a correct value. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()

2021-10-20T09:45:05+00:00

commit 776c75010803849c1cc4f11031a2b3960ab05202 upstream. I got a null-ptr-deref report: KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] ... RIP: 0010:regulator_enable+0x84/0x260 ... Call Trace: ahci_platform_enable_regulators+0xae/0x320 ahci_platform_enable_resources+0x1a/0x120 ahci_probe+0x4f/0x1b9 platform_probe+0x10b/0x280 ... entry_SYSCALL_64_after_hwframe+0x44/0xae If devm_regulator_get() in ahci_platform_get_resources() fails, hpriv->phy_regulator will point to NULL, when enabling or disabling it, null-ptr-deref will occur. ahci_probe() ahci_platform_get_resources() devm_regulator_get(, "phy") // failed, let phy_regulator = NULL ahci_platform_enable_resources() ahci_platform_enable_regulators() regulator_enable(hpriv->phy_regulator) // null-ptr-deref commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") replaces devm_regulator_get_optional() with devm_regulator_get(), but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI. Delete it like AHCI regulator to fix this bug. Fixes: commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") Reported-by: Hulk Robot Signed-off-by: Wang Hai Reviewed-by: Hans de Goede Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libahci_platform: fix IRQ check

2021-05-14T07:50:24+00:00

[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ] Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0 early (as if the call was successful). Override IRQ0 with -EINVAL instead as the 'libata' regards 0 as "no IRQ" (thus polling) anyway... Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci: mvebu: Make SATA PHY optional for Armada 3720

2020-10-09T18:47:56+00:00

Older ATF does not provide SMC call for SATA phy power on functionality and therefore initialization of ahci_mvebu is failing when older version of ATF is using. In this case phy_power_on() function returns -EOPNOTSUPP. This patch adds a new hflag AHCI_HFLAG_IGN_NOTSUPP_POWER_ON which cause that ahci_platform_enable_phys() would ignore -EOPNOTSUPP errors from phy_power_on() call. It fixes initialization of ahci_mvebu on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for SATA phy power. This is regression introduced in commit 8e18c8e58da64 ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property") where SATA phy was defined and therefore ahci_platform_enable_phys() on Espressobin started failing. Fixes: 8e18c8e58da64 ("arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property") Signed-off-by: Pali Rohár Tested-by: Tomasz Maciej Nowak Cc: # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Signed-off-by: Jens Axboe

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

ata: libahci_platform: Export again ahci_platform_able_phys()

2019-12-26T03:47:19+00:00

This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Signed-off-by: Florian Fainelli Signed-off-by: Jens Axboe

ata: libahci_platform: Fix regulator_get_optional() misuse

2019-10-25T20:22:20+00:00

This driver is using regulator_get_optional() to handle all the supplies that it handles, and only ever enables and disables all supplies en masse without ever doing any other configuration of the device to handle missing power. These are clear signs that the API is being misused - it should only be used for supplies that may be physically absent from the system and in these cases the hardware usually needs different configuration if the supply is missing. Instead use normal regualtor_get(), if the supply is not described in DT then the framework will substitute a dummy regulator in so no special handling is needed by the consumer driver. In the case of the PHY regulator the handling in the driver is a hack to deal with integrated PHYs; the supplies are only optional in the sense that that there's some confusion in the code about where they're bound to. From a code point of view they function exactly as normal supplies so can be treated as such. It'd probably be better to model this by instantiating a PHY object for integrated PHYs. Reviewed-by: Hans de Goede Signed-off-by: Mark Brown Signed-off-by: Jens Axboe

ata: libahci_platform: Add of_node_put() before loop exit

2019-09-19T18:21:44+00:00

Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before three such goto statements. Issue found with Coccinelle. Reviewed-by: Hans de Goede Signed-off-by: Nishka Dasgupta Signed-off-by: Jens Axboe

ata: libahci: do not complain in case of deferred probe

2019-07-31T14:51:17+00:00

Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs") Reviewed-by: Hans de Goede Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe

ata: libahci_platform: remove redundant dev_err message

2019-07-16T14:27:09+00:00

devm_ioremap_resource already contains error message, so remove the redundant dev_err message Signed-off-by: Ding Xiang Signed-off-by: Jens Axboe