kernel/linux.git/drivers/ata/ata_generic.c, branch v3.0.95

[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]

2011-03-02T07:36:45+00:00

ata: Intel IDE-R support

2010-10-22T00:21:05+00:00

Intel IDE-R devices are part of the Intel AMT management setup. They don't have any special configuration registers or settings so the ata_generic driver will support them fully. Rather than add a huge table of IDs for each chipset and keep sending in new ones this patch autodetects them. Signed-off-by: Alan Cox Acked-by: Tejun Heo Signed-off-by: Jeff Garzik

ata_generic: drop hard coded DMA force logic for CENATEK

2010-08-01T23:36:04+00:00

Commit 1529c69adc (ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1) implemented ATA_GEN_FORCE_DMA for forcing DMA mode and applied it to CENATEK but forgot to remove the original hard coded logic. This is removal of redundant logic and doesn't affect correctness. Signed-off-by: Tejun Heo Reported-by: Andy Whitcroft Signed-off-by: Jeff Garzik

ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1

2010-07-01T19:34:48+00:00

IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo Cc: Peer Chen Cc: stable@kernel.org Reported-by: Anders Østhus Reported-by: Andreas Graf Reported-by: Benoit Gschwind Reported-by: Damien Cassou Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik

ahci,ata_generic: let ata_generic handle new MBP w/ MCP89

2010-07-01T19:34:46+00:00

For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo Cc: Peer Chen Cc: stable@kernel.org Reported-by: Anders Østhus Reported-by: Andreas Graf Reported-by: Benoit Gschwind Reported-by: Damien Cassou Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik

libata-sff: separate out BMDMA init

2010-05-25T23:40:30+00:00

Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one() from their SFF counterparts. SFF ones no longer try to initialize BMDMA or set PCI master. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik

libata: Pass host flags into the pci helper

2010-03-01T19:58:46+00:00

This allows parallel scan and the like to be set without having to stop using the existing full helper functions. This patch merely adds the argument and fixes up the callers. It doesn't undo the special cases already in the tree or add any new parallel callers. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

pata_piccolo: Driver for old Toshiba chipsets

2009-12-03T19:35:31+00:00

We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

[libata] convert drivers to use ata.h mode mask defines

2009-03-25T02:13:27+00:00

No functional changes in this patch. Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik

libata: beef up iterators

2008-12-29T03:43:20+00:00

There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik