kernel/linux.git/drivers/ata/ahci_platform.c, branch v6.18.22

ata: Switch back to struct platform_driver::remove()

2024-10-17T07:55:08+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/ata/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20241016141609.27329-2-u.kleine-koenig@baylibre.com Signed-off-by: Niklas Cassel

Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-07-03T19:56:23+00:00

Pull driver core updates from Greg KH: "Here are a small set of changes for 6.5-rc1 for some driver core changes. Included in here are: - device property cleanups to make it easier to write "agnostic" drivers when regards to the firmware layer underneath them (DT vs. ACPI) - debugfs documentation updates - devres additions - sysfs documentation and changes to handle empty directory creation logic better - tiny kernfs optimizations - other tiny changes All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Skip empty folders creation sysfs: Improve readability by following the kernel coding style drivers: fwnode: fix fwnode_irq_get[_byname]() ata: ahci_platform: Make code agnostic to OF/ACPI device property: Implement device_is_compatible() ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h base/node: Use 'property' to identify an access parameter driver core: device.h: add some missing kerneldocs kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR isa: Remove unnecessary checks MAINTAINERS: add entry for auxiliary bus debugfs: Correct the 'debugfs_create_str' docs serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array iio: adc: Use devm_krealloc_array hwmon: pmbus: Use devm_krealloc_array

ata: ahci_platform: Make code agnostic to OF/ACPI

2023-06-15T11:34:31+00:00

With the help of a new device_is_compatible() make the driver code agnostic to the OF/ACPI. This makes it neater. As a side effect the header inclusions is corrected (seems mod_devicetable.h was implicitly included). Signed-off-by: Andy Shevchenko Reviewed-by: Serge Semin Reviewed-by: Sakari Ailus Message-ID: <20230609154900.43024-4-andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman

ata: libata: Make ata_platform_remove_one return void

2023-05-14T21:49:39+00:00

The function returned zero unconditionally, so the function returning an int is something between useless and irritating. With the goal to make platform drivers' remove function return void, it's helpful to convert the function accordingly. This converts several drivers to the new .remove_new callback that was introduced to smoothen the platform driver conversion. Signed-off-by: Uwe Kleine-König Acked-by: Jernej Skrabec Acked-by: Serge Semin Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

scsi: ata: Declare SCSI host templates const

2023-03-24T23:19:19+00:00

Make it explicit that ATA host templates are not modified. Reviewed-by: Linus Walleij Acked-by: Damien Le Moal Reviewed-by: Serge Semin (for DWC AHCI SATA) Reviewed-by: John Garry Reviewed-by: Jon Hunter (for Tegra) Cc: Christoph Hellwig Cc: Ming Lei Cc: Hannes Reinecke Cc: John Garry Cc: Mike Christie Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230322195515.1267197-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen

ata: ahci: Add DWC AHCI SATA controller support

2022-09-16T16:40:15+00:00

Synopsys AHCI SATA controller can work pretty under with the generic AHCI-platform driver control. But there are vendor-specific peculiarities which can tune the device performance up and which may need to be fixed up for proper device functioning. In addition some DWC AHCI-based controllers may require small platform-specific fixups, so adding them in the generic AHCI driver would have ruined the code simplicity. Shortly speaking in order to keep the generic AHCI-platform code clean and have DWC AHCI SATA-specific features supported we suggest to add a dedicated DWC AHCI SATA device driver. Aside with the standard AHCI-platform resources getting, enabling/disabling and the controller registration the new driver performs the next actions. First of all there is a way to verify whether the HBA/ports capabilities activated in OF are correct. Almost all features availability is reflected in the vendor-specific parameters registers. So the DWC AHCI driver does the capabilities sanity check based on the corresponding fields state. Secondly if either the Command Completion Coalescing or the Device Sleep feature is enabled the DWC AHCI-specific internal 1ms timer must be fixed in accordance with the application clock signal frequency. In particular the timer value must be set to be Fapp * 1000. Normally the SoC designers pre-configure the TIMER1MS register to contain a correct value by default. But the platforms can support the application clock rate change. If that happens the 1ms timer value must be accordingly updated otherwise the dependent features won't work as expected. In the DWC AHCI driver we suggest to rely on the "aclk" reference clock rate to set the timer interval up. That clock source is supposed to be the AHCI SATA application clock in accordance with the DT bindings. Finally DWC AHCI SATA controller AXI/AHB bus DMA-engine can be tuned up to transfer up to 1024 * FIFO words at a time by setting the Tx/Rx transaction size in the DMA control register. The maximum value depends on the DMA data bus and AXI/AHB bus maximum burst length. In most of the cases it's better to set the maximum possible value to reach the best AHCI SATA controller performance. But sometimes in order to improve the system interconnect responsiveness, transferring in smaller data chunks may be more preferable. For such cases and for the case when the default value doesn't provide the best DMA bus performance we suggest to use the new HBA-port specific DT-properties "snps,{tx,rx}-ts-max" to tune the DMA transactions size up. After all the settings denoted above are handled the DWC AHCI SATA driver proceeds further with the standard AHCI-platform host initializations. Note since DWC AHCI controller is now have a dedicated driver we can discard the corresponding compatible string from the ahci-platform.c module. The same concerns "snps,spear-ahci" compatible string, which is also based on the DWC AHCI IP-core. Signed-off-by: Serge Semin Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: libahci_platform: Parse ports-implemented property in resources getter

2022-09-16T16:39:30+00:00

The ports-implemented property is mainly used on the OF-based platforms with no ports mapping initialized by a bootloader/BIOS firmware. Seeing the same of_property_read_u32()-based pattern has already been implemented in the generic AHCI LLDD (glue) driver and in the Mediatek, St AHCI drivers let's move the property read procedure to the generic ahci_platform_get_resources() method. Thus we'll have the forced ports mapping feature supported for each OF-based platform which requires that, and stop re-implementing the same pattern in there a bit simplifying the code. Signed-off-by: Serge Semin Signed-off-by: Damien Le Moal

ata: Drop commas after OF match table sentinels

2022-03-07T02:49:10+00:00

It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Add comments to clarify the purpose of the empty elements. Rewrap entries to a single line to have a consistent style. Signed-off-by: Geert Uytterhoeven Reviewed-by: Sergey Shtylyov Acked-by: Florian Fainelli [ahci_brcm] Reviewed-by: Kieran Bingham Reviewed-by: Linus Walleij Signed-off-by: Damien Le Moal

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 45

2019-05-24T15:27:12+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de Signed-off-by: Greg Kroah-Hartman

ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA

2018-09-07T14:32:17+00:00

Due to hardware errata, Ampere Computing eMAG SATA can't support AHCI ALPM feature. This patch disables the AHCI ALPM feature for eMAG SATA. Signed-off-by: Suman Trpathi Signed-off-by: Rameshwar Prasad Sahu Signed-off-by: Jens Axboe