kernel/linux.git/drivers/ata/Makefile, branch v2.6.28

libata: Add Intel SCH PATA driver

2008-05-06T15:33:58+00:00

This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L) PATA controller support. Signed-off-by: Alek Du Signed-off-by: Jeff Garzik

[MIPS] ATA: Rename routerboard 500 to 532

2008-04-29T06:16:25+00:00

The platform is actually named routerboard 532 so let's call it this. This patch only rename files, Kconfig and C symbols; no functional changes. Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik

libata: make PMP support optional

2008-04-17T19:44:25+00:00

Make PMP support optional by adding CONFIG_SATA_PMP and leaving out libata-pmp.c if it isn't set. PMP helpers return constant values if PMP support is not enabled and PMP declarations alias non-PMP counterparts. This makes the compiler to leave out PMP related part out and LLDs to use non-PMP counterparts automatically. Signed-off-by: Tejun Heo

libata: make SFF support optional

2008-04-17T19:44:24+00:00

Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo

[libata] Add support for the RB500 PATA CompactFlash

2008-03-11T00:54:05+00:00

Signed-off-by: Jeff Garzik

Merge branch 'linux-2.6'

2008-01-31T00:25:51+00:00

pata_ninja32: Cardbus ATA initial support

2008-01-23T10:24:10+00:00

Lots of work needed to bring it up to scratch but it does work so you can now use the card. That makes it at least useful, especially as the other cardbus cards are usually INIC162x which aren't yet supported well. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

libata: pata_of_platform: OF-Platform PATA device driver

2008-01-15T16:23:43+00:00

This driver nicely wraps around pata_platform library functions, and provides OF platform bus bindings to the PATA devices. Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry, needed for PA Semi Electra. Signed-off-by: Anton Vorontsov Signed-off-by: Olof Johansson

drivers/ata: add support to Freescale 3.0Gbps SATA Controller

2007-10-18T00:49:02+00:00

This patch adds support for Freescale 3.0Gbps SATA Controller supporting Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller can be found on MPC8315 and MPC8378. Signed-off-by: Ashish Kalra Signed-off-by: Li Yang Signed-off-by: Jeff Garzik

pata_cs5536: ATA driver for Geode companion chip

2007-10-15T19:44:18+00:00

This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik