kernel/linux.git/drivers/ata/Makefile, branch linux-2.6.35.y

libata-sff: make BMDMA optional

2010-05-25T23:41:12+00:00

Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA. In Kconfig, drivers are grouped into five groups - non-SFF native, SFF w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic fallback / legacy ones. Kconfig and Makefile are reorganized according to the groups and ordered alphabetically inside each group. ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and functions. This increase the binary size slightly when BMDMA is enabled but on both native-only and PIO-only configurations the size is slightly reduced. Either way, the size difference is insignificant. This change is more meaningful to signify the separation between SFF and BMDMA and as a tool to verify the separation. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik

ahci: Add platform driver

2010-05-14T21:08:01+00:00

This can be used for AHCI-compatible interfaces implemented inside System-On-Chip solutions, or AHCI devices connected via localbus. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik

ahci: Move generic code into libahci

2010-05-14T21:08:01+00:00

This patch should contain no functional changes, just moves code around. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik

Merge commit 'origin/master' into next

2009-12-09T06:14:38+00:00

Conflicts: include/linux/kvm.h

libata/drivers: Add driver for Apple "MacIO" IDE controller

2009-12-09T06:09:28+00:00

This is a libata driver for the "macio" IDE controller used on most Apple PowerMac and PowerBooks. It's a libata equivalent of drivers/ide/ppc/pmac.c It supports all the features of its predecessor, including mediabay hotplug and suspend/resume. It should also support module load/unload. The timing calculations have been simplified to use pre-calculated tables compared to drivers/ide/pmac.c and it uses the new mediabay interface provided by a previous patch. Signed-off-by: Benjamin Herrenschmidt Acked-by: Tejun Heo

pata_piccolo: Driver for old Toshiba chipsets

2009-12-03T19:35:31+00:00

We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers

2009-09-17T20:47:06+00:00

This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane . Signed-off-by: John(Jung-Ik) Lee Reviewed-by: Grant Grundler Reviewed-by: Gwendal Gringo Signed-off-by: Jeff Garzik

[libata] Add pata_rdc driver for RDC ATA devices

2009-09-01T23:47:20+00:00

From: Alan Cox Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik

[libata] PATA driver for CF interface on AT91SAM9260 SoC

2009-06-23T05:54:24+00:00

This patch provides PATA driver for CompactFlash interface in True IDE mode on AT91SAM9260 SoC. Signed-off-by: Sergey Matyukevich Signed-off-by: Jeff Garzik

[ARM] 5522/1: PalmLD: IDE support

2009-05-31T13:50:40+00:00

Support for Palm LifeDrive's internal harddrive. Signed-off-by: Marek Vasut Acked-by: Jeff Garzik Signed-off-by: Russell King