kernel/linux.git/drivers/android, branch v4.14.66

ANDROID: binder: prevent transactions into own process.

2018-05-01T19:58:20+00:00

commit 7aa135fcf26377f92dc0680a57566b4c7f3e281b upstream. This can't happen with normal nodes (because you can't get a ref to a node you own), but it could happen with the context manager; to make the behavior consistent with regular nodes, reject transactions into the context manager by the process owning it. Reported-by: syzbot+09e05aba06723a94d43d@syzkaller.appspotmail.com Signed-off-by: Martijn Coenen Cc: stable Signed-off-by: Greg Kroah-Hartman

binder: replace "%p" with "%pK"

2018-02-25T10:07:52+00:00

commit 8ca86f1639ec5890d400fff9211aca22d0a392eb upstream. The format specifier "%p" can leak kernel addresses. Use "%pK" instead. There were 4 remaining cases in binder.c. Signed-off-by: Todd Kjos Cc: stable Signed-off-by: Greg Kroah-Hartman

binder: check for binder_thread allocation failure in binder_poll()

2018-02-25T10:07:52+00:00

commit f88982679f54f75daa5b8eff3da72508f1e7422f upstream. If the kzalloc() in binder_get_thread() fails, binder_poll() dereferences the resulting NULL pointer. Fix it by returning POLLERR if the memory allocation failed. This bug was found by syzkaller using fault injection. Reported-by: syzbot Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: synchronize_rcu() when using POLLFREE.

2018-02-25T10:07:52+00:00

commit 5eeb2ca02a2f6084fc57ae5c244a38baab07033a upstream. To prevent races with ep_remove_waitqueue() removing the waitqueue at the same time. Reported-by: syzbot+a2a3c4909716e271487e@syzkaller.appspotmail.com Signed-off-by: Martijn Coenen Cc: stable # 4.14+ Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: remove WARN() for redundant txn error

2018-02-25T10:07:52+00:00

commit e46a3b3ba7509cb7fda0e07bc7c63a2cd90f579b upstream. binder_send_failed_reply() is called when a synchronous transaction fails. It reports an error to the thread that is waiting for the completion. Given that the transaction is synchronous, there should never be more than 1 error response to that thread -- this was being asserted with a WARN(). However, when exercising the driver with syzbot tests, cases were observed where multiple "synchronous" requests were sent without waiting for responses, so it is possible that multiple errors would be reported to the thread. This testing was conducted with panic_on_warn set which forced the crash. This is easily reproduced by sending back-to-back "synchronous" transactions without checking for any response (eg, set read_size to 0): bwr.write_buffer = (uintptr_t)&bc1; bwr.write_size = sizeof(bc1); bwr.read_buffer = (uintptr_t)&br; bwr.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr); sleep(1); bwr2.write_buffer = (uintptr_t)&bc2; bwr2.write_size = sizeof(bc2); bwr2.read_buffer = (uintptr_t)&br; bwr2.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr2); sleep(1); The first transaction is sent to the servicemanager and the reply fails because no VMA is set up by this client. After binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR is sitting on the thread's todo list since the read_size was 0 and the client is not waiting for a response. The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not been consumed, so the thread's reply_error.cmd is still set (normally cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore when the servicemanager attempts to reply to the 2nd failed transaction, the error is already set and it triggers this warning. This is a user error since it is not waiting for the synchronous transaction to complete. If it ever does check, it will see an error. Changed the WARN() to a pr_warn(). Signed-off-by: Todd Kjos Reported-by: syzbot Cc: stable Signed-off-by: Greg Kroah-Hartman

android: binder: use VM_ALLOC to get vm area

2018-02-03T16:39:22+00:00

commit aac6830ec1cb681544212838911cdc57f2638216 upstream. VM_IOREMAP is used to access hardware through a mechanism called I/O mapped memory. Android binder is a IPC machanism which will not access I/O memory. And VM_IOREMAP has alignment requiement which may not needed in binder. __get_vm_area_node() { ... if (flags & VM_IOREMAP) align = 1ul << clamp_t(int, fls_long(size), PAGE_SHIFT, IOREMAP_MAX_ORDER); ... } This patch will save some kernel vm area, especially for 32bit os. In 32bit OS, kernel vm area is only 240MB. We may got below error when launching a app: <3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12 <3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12 Signed-off-by: Ganesh Mahendran Acked-by: Martijn Coenen Acked-by: Todd Kjos Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: remove waitqueue when thread exits.

2018-02-03T16:39:22+00:00

commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream. binder_poll() passes the thread->wait waitqueue that can be slept on for work. When a thread that uses epoll explicitly exits using BINDER_THREAD_EXIT, the waitqueue is freed, but it is never removed from the corresponding epoll data structure. When the process subsequently exits, the epoll cleanup code tries to access the waitlist, which results in a use-after-free. Prevent this by using POLLFREE when the thread exits. Signed-off-by: Martijn Coenen Reported-by: syzbot Signed-off-by: Greg Kroah-Hartman

binder: fix proc->files use-after-free

2018-01-02T19:31:15+00:00

commit 7f3dc0088b98533f17128058fac73cd8b2752ef1 upstream. proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: fix transaction leak.

2017-12-10T12:40:37+00:00

commit fb2c445277e7b0b4ffe10de8114bad4eccaca948 upstream. If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by: Martijn Coenen Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman