kernel/linux.git/drivers/android, branch v4.14.18

android: binder: use VM_ALLOC to get vm area

2018-02-03T16:39:22+00:00

commit aac6830ec1cb681544212838911cdc57f2638216 upstream. VM_IOREMAP is used to access hardware through a mechanism called I/O mapped memory. Android binder is a IPC machanism which will not access I/O memory. And VM_IOREMAP has alignment requiement which may not needed in binder. __get_vm_area_node() { ... if (flags & VM_IOREMAP) align = 1ul << clamp_t(int, fls_long(size), PAGE_SHIFT, IOREMAP_MAX_ORDER); ... } This patch will save some kernel vm area, especially for 32bit os. In 32bit OS, kernel vm area is only 240MB. We may got below error when launching a app: <3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12 <3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12 Signed-off-by: Ganesh Mahendran Acked-by: Martijn Coenen Acked-by: Todd Kjos Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: remove waitqueue when thread exits.

2018-02-03T16:39:22+00:00

commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream. binder_poll() passes the thread->wait waitqueue that can be slept on for work. When a thread that uses epoll explicitly exits using BINDER_THREAD_EXIT, the waitqueue is freed, but it is never removed from the corresponding epoll data structure. When the process subsequently exits, the epoll cleanup code tries to access the waitlist, which results in a use-after-free. Prevent this by using POLLFREE when the thread exits. Signed-off-by: Martijn Coenen Reported-by: syzbot Signed-off-by: Greg Kroah-Hartman

binder: fix proc->files use-after-free

2018-01-02T19:31:15+00:00

commit 7f3dc0088b98533f17128058fac73cd8b2752ef1 upstream. proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: fix transaction leak.

2017-12-10T12:40:37+00:00

commit fb2c445277e7b0b4ffe10de8114bad4eccaca948 upstream. If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by: Martijn Coenen Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

android: binder: Fix null ptr dereference in debug msg

2017-10-21T08:14:20+00:00

Don't access next->data in kernel debug message when the next buffer is null. Acked-by: Arve Hjønnevåg Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman

android: binder: Don't get mm from task

2017-10-21T08:14:20+00:00

Use binder_alloc struct's mm_struct rather than getting a reference to the mm struct through get_task_mm to avoid a potential deadlock between lru lock, task lock and dentry lock, since a thread can be holding the task lock and the dentry lock while trying to acquire the lru lock. Acked-by: Arve Hjønnevåg Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman

binder: call poll_wait() unconditionally.

2017-10-20T10:53:43+00:00

Because we're not guaranteed that subsequent calls to poll() will have a poll_table_struct parameter with _qproc set. When _qproc is not set, poll_wait() is a noop, and we won't be woken up correctly. Signed-off-by: Martijn Coenen Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2017-10-15T11:50:38+00:00

Pull char/misc driver fixes from Greg KH: "Here are 4 patches to resolve some char/misc driver issues found these past weeks. One of them is a mei bugfix and another is a new mei device id. There is also a hyper-v fix for a reported issue, and a binder issue fix for a problem reported by a few people. All of these have been in my tree for a while, I don't know if linux-next is really testing much this month. But 0-day is happy with them :)" * tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: fix use-after-free in binder_transaction() Drivers: hv: vmbus: Fix bugs in rescind handling mei: me: add gemini lake devices id mei: always use domain runtime pm callbacks.

binder: fix use-after-free in binder_transaction()

2017-10-04T09:25:10+00:00

User-space normally keeps the node alive when creating a transaction since it has a reference to the target. The local strong ref keeps it alive if the sending process dies before the target process processes the transaction. If the source process is malicious or has a reference counting bug, this can fail. In this case, when we attempt to decrement the node in the failure path, the node has already been freed. This is fixed by taking a tmpref on the node while constructing the transaction. To avoid re-acquiring the node lock and inner proc lock to increment the proc's tmpref, a helper is used that does the ref increments on both the node and proc. Signed-off-by: Todd Kjos Cc: stable Signed-off-by: Greg Kroah-Hartman