kernel/linux.git/drivers/acpi, branch v4.19.39

Revert "ACPICA: Clear status of GPEs before enabling them"

2019-05-04T07:20:10+00:00

commit 2c2a2fb1e2a9256714338875bede6b7cbd4b9542 upstream. Revert commit c8b1917c8987 ("ACPICA: Clear status of GPEs before enabling them") that causes problems with Thunderbolt controllers to occur if a dock device is connected at init time (the xhci_hcd and thunderbolt modules crash which prevents peripherals connected through them from working). Commit c8b1917c8987 effectively causes commit ecc1165b8b74 ("ACPICA: Dispatch active GPEs at init time") to get undone, so the problem addressed by commit ecc1165b8b74 appears again as a result of it. Fixes: c8b1917c8987 ("ACPICA: Clear status of GPEs before enabling them") Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943 Reported-by: Michael Hirmke Reported-by: Takashi Iwai Cc: 4.17+ # 4.17+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

nfit/ars: Avoid stale ARS results

2019-04-27T07:36:39+00:00

commit 78153dd45e7e0596ba32b15d02bda08e1513111e upstream. Gate ARS result consumption on whether the OS issued start-ARS since the previous consumption. The BIOS may only clear its result buffers after a successful start-ARS. Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks") Cc: Reported-by: Krzysztof Rusocki Reported-by: Vishal Verma Reviewed-by: Toshi Kani Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

nfit/ars: Allow root to busy-poll the ARS state machine

2019-04-27T07:36:39+00:00

commit 5479b2757f26fe9908fc341d105b2097fe820b6f upstream. The ARS implementation implements exponential back-off on the poll interval to prevent high-frequency access to the DIMM / platform interface. Depending on when the ARS completes the poll interval may exceed the completion event by minutes. Allow root to reset the timeout each time it probes the status. A one-second timeout is still enforced, but root can otherwise can control the poll interval. Fixes: bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: Reported-by: Erwin Tsaur Reviewed-by: Toshi Kani Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

nfit/ars: Introduce scrub_flags

2019-04-27T07:36:39+00:00

commit e34b8252a3d2893ca55c82dbfcdaa302fa03d400 upstream. In preparation for introducing new flags to gate whether ARS results are stale, or poll the completion state, convert the existing flags to an unsigned long with enumerated values. This conversion allows the flags to be atomically updated outside of ->init_mutex. Reviewed-by: Toshi Kani Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

nfit/ars: Remove ars_start_flags

2019-04-27T07:36:38+00:00

commit 317a992ab9266b86b774b9f6b0f87eb4f59879a1 upstream. The ars_start_flags property of 'struct acpi_nfit_desc' is no longer used since ARS_REQ_SHORT and ARS_REQ_LONG were added. Reviewed-by: Toshi Kani Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"

2019-04-20T07:16:04+00:00

[ Upstream commit b6a3e1475b0220378ad32bdf4d8692f058b1fc03 ] On some Samsung hardware, it is necessary to clear events accumulated by the EC during sleep. These ECs stop reporting GPEs until they are manually polled, if too many events are accumulated. Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands unconditionally after resume to clear all the EC query events on those platforms. Later, commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ polling logic should handle this case. Now it has been proved that the EC IRQ Polling logic does not fix the issue actually because we got regression report on these Samsung platforms after removing the quirk. Thus revert commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") to introduce back the Samsung quirk in this patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161 Tested-by: Ortwin Glück Tested-by: Francisco Cribari Tested-by: Balazs Varga Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle

2019-04-20T07:16:03+00:00

[ Upstream commit f941d3e41da7f86bdb9dcc1977c2bcc6b89bfe47 ] There are systems in which non-wakeup GPEs fire during the "noirq" suspend stage of suspending devices and that effectively prevents the system that tries to suspend to idle from entering any low-power state at all. If the offending GPE fires regularly and often enough, the system appears to be suspended, but in fact it is in a tight loop over "noirq" suspend and "noirq" resume of devices all the time. To prevent that from happening, disable all non-wakeup GPEs except for the EC GPE for suspend-to-idle (the EC GPE is special, because on some systems it has to be enabled for power button wakeup events to be generated as expected). Fixes: 147a7d9d25ca (ACPI / PM: Do not reconfigure GPEs for suspend-to-idle) Link: https://bugzilla.kernel.org/show_bug.cgi?id=201987 Reported-by: Zhang Rui Tested-by: Mika Westerberg Tested-by: Zhang Rui Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI / SBS: Fix GPE storm on recent MacBookPro's

2019-04-20T07:16:01+00:00

[ Upstream commit ca1721c5bee77105829cbd7baab8ee0eab85b06d ] On Apple machines, plugging-in or unplugging the power triggers a GPE for the EC. Since these machines expose an SBS device, this GPE ends up triggering the acpi_sbs_callback(). This in turn tries to get the status of the SBS charger. However, on MBP13,* and MBP14,* machines, performing the smbus-read operation to get the charger's status triggers the EC's GPE again. The result is an endless re-triggering and handling of that GPE, consuming significant CPU resources (> 50% in irq). In the end this is quite similar to commit 3031cddea633 (ACPI / SBS: Don't assume the existence of an SBS charger), except that on the above machines a status of all 1's is returned. And like there, we just want ignore the charger here. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198169 Signed-off-by: Ronald TschalÃ¤r Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI / utils: Drop reference in test for device presence

2019-04-20T07:15:58+00:00

[ Upstream commit 54e3aca84e571559915998aa6cc05e5ac37c043b ] When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by: Andy Shevchenko Reviewed-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: AML interpreter: add region addresses in global list during initialization

2019-04-17T06:38:55+00:00

commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream. The table load process omitted adding the operation region address range to the global list. This omission is problematic because the OS queries the global list to check for address range conflicts before deciding which drivers to load. This commit may result in warning messages that look like the following: [ 7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213) [ 7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver However, these messages do not signify regressions. It is a result of properly adding address ranges within the global address list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011 Tested-by: Jean-Marc Lenoir Signed-off-by: Erik Schmauss Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman