kernel/linux.git/drivers/acpi, branch v4.19.16

ACPI/IORT: Fix rc_dma_get_range()

2019-01-16T21:04:34+00:00

commit c7777236dd8f587f6a8d6800c03df318fd4d2627 upstream. When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger Signed-off-by: Jean-Philippe Brucker Signed-off-by: Lorenzo Pieralisi Reviewed-by: Eric Auger Acked-by: Robin Murphy Cc: stable@vger.kernel.org Cc: Will Deacon Cc: Hanjun Guo Cc: Sudeep Holla Cc: Catalin Marinas Cc: "Rafael J. Wysocki" Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

ACPI / PMIC: xpower: Fix TS-pin current-source handling

2019-01-16T21:04:34+00:00

commit 2b531d71595d2b5b12782a49b23c335869e2621e upstream. The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: power: Skip duplicate power resource references in _PRx

2019-01-16T21:04:33+00:00

commit 7d7b467cb95bf29597b417d4990160d4ea6d69b9 upstream. Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable Signed-off-by: Hans de Goede [ rjw: Subject & changelog, comments ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short"

2018-12-21T13:15:23+00:00

[ Upstream commit b5fd2e00a60248902315fb32210550ac3cb9f44c ] A "short" ARS (address range scrub) instructs the platform firmware to return known errors. In contrast, a "long" ARS instructs platform firmware to arrange every data address on the DIMM to be read / checked for poisoned data. The conversion of the flags in commit d3abaf43bab8 "acpi, nfit: Fix Address Range Scrub completion tracking", changed the meaning of passing '0' to acpi_nfit_ars_rescan(). Previously '0' meant "not short", now '0' is ARS_REQ_SHORT. Pass ARS_REQ_LONG to restore the expected scrub-type behavior of user-initiated ARS sessions. Fixes: d3abaf43bab8 ("acpi, nfit: Fix Address Range Scrub completion tracking") Reported-by: Jacek Zloch Cc: Vishal Verma Reviewed-by: Dave Jiang Reviewed-by: Vishal Verma Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value

2018-12-17T08:24:40+00:00

[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ] Running the Clang static analyzer on IORT code detected the following error: Logic error: Branch condition evaluates to a garbage value in iort_get_platform_device_domain() If the named component associated with a given device has no IORT mappings, iort_get_platform_device_domain() exits its MSI mapping loop with msi_parent pointer containing garbage, which can lead to erroneous code path execution. Initialize the msi_parent pointer, fixing the bug. Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based platform device") Reported-by: Patrick Bellasi Reviewed-by: Hanjun Guo Acked-by: Will Deacon Cc: Sudeep Holla Cc: "Rafael J. Wysocki" Signed-off-by: Lorenzo Pieralisi Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin

ACPICA: AML interpreter: add region addresses in global list during initialization

2018-12-01T08:37:30+00:00

commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream. The table load process omitted adding the operation region address range to the global list. This omission is problematic because the OS queries the global list to check for address range conflicts before deciding which drivers to load. This commit may result in warning messages that look like the following: [ 7.871761] ACPI Warning: system_IO range 0x00000428-0x0000042F conflicts with op_region 0x00000400-0x0000047F (\PMIO) (20180531/utaddress-213) [ 7.871769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver However, these messages do not signify regressions. It is a result of properly adding address ranges within the global address list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011 Tested-by: Jean-Marc Lenoir Signed-off-by: Erik Schmauss Cc: All applicable Signed-off-by: Rafael J. Wysocki Cc: Jean Delvare Signed-off-by: Greg Kroah-Hartman

ACPI / platform: Add SMB0001 HID to forbidden_id_list

2018-11-27T15:13:10+00:00

commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream. Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523 Reported-by: Lukas Kahnert Tested-by: Marc Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Revert "ACPICA: AML interpreter: add region addresses in global list during initialization"

2018-11-21T08:19:29+00:00

This reverts commit 22083c028d0b3ee419232d25ce90367e5b25df8f which is commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream. Jean writes: This commit was tagged with: Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011 Tested-by: Jean-Marc Lenoir Cc: All applicable making it sound like it was fixing an actual bug. This is not the case. The commit fixes a side issue discovered while investigating bug #200011. It does NOT fix bug #200011 itself (as explicitly reported by Jean-Marc at https://bugzilla.kernel.org/show_bug.cgi?id=200011#c65 ). It does however cause regressions, despite what the commit message says. See: https://bugzilla.kernel.org/show_bug.cgi?id=201721 and I expect more similar regressions, as ACPI resource conflicts are very frequent. This commit was not stable material to start with. It is intrusive, presents a risk of side effects, and does not solve an actual bug that is bothering users. Reported-by: Jean Delvare Cc: Jean-Marc Lenoir Cc: Erik Schmauss Cc: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

acpi, nfit: Fix ARS overflow continuation

2018-11-21T08:19:17+00:00

commit 3fa58dcab50a0aa16817f16a8d38aee869eb3fb9 upstream. When the platform BIOS is unable to report all the media error records it requires the OS to restart the scrub at a prescribed location. The driver detects the overflow condition, but then fails to report it to the ARS state machine after reaping the records. Propagate -ENOSPC correctly to continue the ARS operation. Cc: Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reported-by: Jacek Zloch Reviewed-by: Dave Jiang Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

acpi/nfit, x86/mce: Validate a MCE's address before using it

2018-11-21T08:19:17+00:00

commit e8a308e5f47e545e0d41d0686c00f5f5217c5f61 upstream. The NFIT machine check handler uses the physical address from the mce structure, and compares it against information in the ACPI NFIT table to determine whether that location lies on an NVDIMM. The mce->addr field however may not always be valid, and this is indicated by the MCI_STATUS_ADDRV bit in the status field. Export mce_usable_address() which already performs validation for the address, and use it in the NFIT handler. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Robert Elliott Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov CC: Arnd Bergmann Cc: Dan Williams CC: Dave Jiang CC: elliott@hpe.com CC: "H. Peter Anvin" CC: Ingo Molnar CC: Len Brown CC: linux-acpi@vger.kernel.org CC: linux-edac CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo CC: "Rafael J. Wysocki" CC: Ross Zwisler CC: stable CC: Thomas Gleixner CC: Tony Luck CC: x86-ml CC: Yazen Ghannam Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com Signed-off-by: Greg Kroah-Hartman