kernel/linux.git/drivers/acpi, branch v3.18.100

ACPI: sbshc: remove raw pointer from printk() message

2018-02-16T19:14:46+00:00

commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by: Wang Qize Signed-off-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: APEI / ERST: Fix missing error handling in erst_reader()

2018-01-02T19:04:56+00:00

commit bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 upstream. The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Tested-by: Jerry Tang Signed-off-by: Takashi Iwai Acked-by: Kees Cook Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal

2017-08-30T08:16:57+00:00

commit 7d64f82cceb21e6d95db312d284f5f195e120154 upstream. When removing a GHES device notified by SCI, list_del_rcu() is used, ghes_remove() should call synchronize_rcu() before it goes on to call kfree(ghes), otherwise concurrent RCU readers may still hold this list entry after it has been freed. Signed-off-by: James Morse Reviewed-by: "Huang, Ying" Fixes: 81e88fdc432a (ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / power: Avoid maybe-uninitialized warning

2017-04-30T03:49:13+00:00

commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: Do not create a platform_device for IOAPIC/IOxAPIC

2017-04-22T05:15:06+00:00

commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by: Joerg Roedel Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: Fix incompatibility with mcount-based function graph tracing

2017-04-22T05:15:05+00:00

commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by: Paul Menzel Signed-off-by: Josh Poimboeuf Acked-by: Steven Rostedt (VMware) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings

2016-06-03T15:30:35+00:00

[ Upstream commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 ] The order of the _OSI related functionalities is as follows: acpi_blacklisted() acpi_dmi_osi_linux() acpi_osi_setup() acpi_osi_setup() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< parse_args() __setup("acpi_osi=") acpi_osi_setup_linux() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< acpi_early_init() acpi_initialize_subsystem() acpi_ut_initialize_interfaces() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ acpi_bus_init() acpi_os_initialize1() acpi_install_interface_handler(acpi_osi_handler) acpi_osi_setup_late() acpi_update_interfaces() for "!" >>>>>>>>>>>>>>>>>>>>>>>> acpi_osi_handler() Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command line setting can override the DMI detection. That's why acpi_blacklisted() is put before __setup("acpi_osi="). Then we can notice the following wrong invocation order. There are acpi_update_interfaces() (marked by <<<<) calls invoked before acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible to use acpi_osi=!* correctly from OSI DMI table or from the command line. The use of acpi_osi=!* is meant to disable both ACPICA (acpi_gbl_supported_interfaces) and Linux specific strings (osi_setup_entries) while the ACPICA part should have stopped working because of the order issue. This patch fixes this issue by moving acpi_update_interfaces() to where it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux specific strings are still handled in the original place in order to make the following command line working: acpi_osi=!* acpi_osi="Module Device". Note that since acpi_osi=!* is meant to further disable linux specific string comparing to the acpi_osi=!, there is no such use case in our bug fixing work and hence there is no one using acpi_osi=!* either from the command line or from the DMI quirks, this issue is just a theoretical issue. Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings) Cc: 3.12+ # 3.12+ Tested-by: Lukas Wunner Tested-by: Chen Yu Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Dispatcher: Update thread ID for recursive method calls

2016-05-17T21:30:14+00:00

[ Upstream commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da ] ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9 Signed-off-by: Prarit Bhargava Tested-by: Andy Lutomirski # On a Dell XPS 13 9350 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

x86, irq: Keep balance of IOAPIC pin reference count

2016-04-18T12:49:18+00:00

[ Upstream commit cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687 ] To keep balance of IOAPIC pin reference count, we need to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. There are two cases which will cause reentrance. The first case is caused by suspend/hibernation. If pcibios_disable_irq is called during suspending/hibernating, we don't release the assigned IRQ number, otherwise it may break the suspend/hibernation. So late when pcibios_enable_irq is called during resume, we shouldn't allocate IRQ number again. The second case is that function acpi_pci_irq_enable() may be called twice for PCI devices present at boot time as below: 1) pci_acpi_init() --> acpi_pci_irq_enable() if pci_routeirq is true 2) pci_enable_device() --> pcibios_enable_device() --> acpi_pci_irq_enable() We can't kill kernel parameter pci_routeirq yet because it's still needed for debugging purpose. So flag irq_managed is introduced to track whether IRQ number is assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. Signed-off-by: Jiang Liu Cc: Konrad Rzeszutek Wilk Cc: Tony Luck Cc: Joerg Roedel Cc: Greg Kroah-Hartman Cc: Benjamin Herrenschmidt Cc: Rafael J. Wysocki Cc: Bjorn Helgaas Cc: Randy Dunlap Cc: Yinghai Lu Cc: Borislav Petkov Cc: Len Brown Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin

ACPI / init: Switch over platform to the ACPI mode later

2015-08-27T17:25:39+00:00

[ Upstream commit cdbbeb69d4b93455a73edff725639216d7fe0b38 ] commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream. Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann Signed-off-by: Rafael J. Wysocki Acked-by: Toshi Kani Reviewed-by: Hanjun Guo Reviewed-by: Lee, Chun-Yi Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin