kernel/linux.git/drivers/acpi/scan.c, branch v4.17.1

ACPI / scan: Initialize watchdog before PNP

2018-04-23T06:56:38+00:00

At least on one Dell system the PNP motherboard resources device includes resources used by WDAT table. Since PNP gets initialized before WDAT it results following error and no watchdog: platform wdat_wdt: failed to claim resource 3: [io 0x046a-0x046c] ACPI: watchdog: Device creation failed: -16 Now, the PNP system driver is already accustomed with the situation that it cannot reserve all those motherboard resources because drivers using those might have reserved them already. In addition putting WDAT table resources under motherboard resources device makes sense in general. Fix this by initializing WDAT right before PNP. This allows WDAT to reserve all its resources and still keeps PNP system driver happy. Reported-by: Shubhrata.Priyadarsh@dell.com Reported-by: Takashi Iwai Signed-off-by: Mika Westerberg Acked-by: Guenter Roeck Signed-off-by: Rafael J. Wysocki

Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-04-07T01:31:06+00:00

Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...

ACPI / scan: Do not enumerate Indirect IO host children

2018-04-04T13:42:50+00:00

Through the logical PIO framework, systems which otherwise have no IO space access to legacy ISA/LPC devices may access these devices through so-called "indirect IO" method. In this, IO space accesses for non-PCI hosts are redirected to a host LLDD to manually generate the IO space (bus) accesses. Hosts are able to register a region in logical PIO space to map to its bus address range. Indirect IO child devices have an associated host-specific bus address. Special translation is required to map between a logical PIO address for a device and its host bus address. Since in the ACPI tables the child device IO resources would be the host-specific values, it is required the ACPI scan code should not enumerate these devices, and that this should be the responsibility of the host driver so that it can "fixup" the resources so that they map to the appropriate logical PIO addresses. To avoid enumerating these child devices, add a check from acpi_device_enumeration_by_parent() as to whether the parent for a device is a member of a known list of "indirect IO" hosts. For now, the HiSilicon LPC host controller ID is added. Tested-by: dann frazier Signed-off-by: John Garry Signed-off-by: Bjorn Helgaas Reviewed-by: Andy Shevchenko Acked-by: Rafael J. Wysocki

ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use

2018-04-04T13:42:49+00:00

Currently the ACPI scan has special handling for serial bus slaves, in that it makes it the responsibility of the slave device's parent to enumerate the device. To support other types of slave devices which require the same special handling but where the bus is not strictly a serial bus, such as devices on the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to acpi_device_enumeration_by_parent(), so that the name can fit the wider purpose. Also rename the associated device flag acpi_device_flags.serial_bus_slave to .enumeration_by_parent. Signed-off-by: John Garry Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki

ACPI / scan: Send change uevent with offine environmental data

2018-03-20T09:33:51+00:00

In current design of ACPI container offline, Kernel emits KOBJ_CHANGE uevent to user space to indidate that the ejection of the container was triggered by platform. (caa73ea15 patch) A pure KOBJ_CHANGE uevent is not enough for user space to identify the purpose. For example, a "udevadm trigger" command can also be used to emit change event to all udev rules. A udev rule can not identify that the event is from kernel for offline or from udevadm for other purpose. Then the offline action in udev rule may also be triggered by udevadm tool. So, similar to the change uevent of dock, kernel sends the KOBJ_CHANGE uevent with a offline environmental data to indicate purpose. It's useful by udev rule for using ENV{EVENT} filter. Acked-by: Michal Hocko Tested-by: Michal Hocko Signed-off-by: "Lee, Chun-Yi" Signed-off-by: Rafael J. Wysocki

ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs

2018-02-04T08:11:56+00:00

The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some code to handle certain device quirks, in some cases we also need this quirk handling for the initial _STA call. Specifically on some devices calling _STA before all _DEP dependencies are met results in errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) acpi_get_bus_status already has code to avoid this, so by using it we also silence these errors from the initial _STA call. Note that in order for the acpi_get_bus_status handling for this to work, we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called, this means that battery devices will be instantiated with an initial status of 0. This is not a problem, acpi_bus_attach will get called soon after the instantiation anyways and it will update the status as first point of order. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-ec' into acpi

2017-11-30T12:37:29+00:00

* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device

ACPI / EC: Fix regression related to PM ops support in ECDT device

2017-11-20T23:13:02+00:00

On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga Tested-by: Luya Tshimbalanga Cc: 4.9+ # 4.9+ Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2017-11-14T05:05:31+00:00

Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...

ACPI / scan: Fix enumeration for special UART devices

2017-10-20T12:24:44+00:00

UART devices is expected to be enumerated by SerDev subsystem. During ACPI scan, serial devices behind SPI, I2C or UART buses are not enumerated, allowing them to be enumerated by their respective parents. Rename *spi_i2c_slave* to *serial_bus_slave* as this will be used for serial devices on serial buses (SPI, I2C or UART). On Macs an empty ResourceTemplate is returned for uart slaves. Instead the device properties "baud", "parity", "dataBits", "stopBits" are provided. Add a check for "baud" in acpi_is_serial_bus_slave(). Signed-off-by: Frédéric Danis Reviewed-by: Sebastian Reichel Tested-by: Ronald Tschalär Tested-by: Peter Y. Chuang Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman