kernel/linux.git/drivers/acpi/scan.c, branch v4.14.217

ACPI: scan: Harden acpi_device_add() against device ID overflows

2021-01-23T14:48:40+00:00

commit a58015d638cd4e4555297b04bec9b49028369075 upstream. Linux VM on Hyper-V crashes with the latest mainline: [ 4.069624] detected buffer overflow in strcpy [ 4.077733] kernel BUG at lib/string.c:1149! .. [ 4.085819] RIP: 0010:fortify_panic+0xf/0x11 ... [ 4.085819] Call Trace: [ 4.085819] acpi_device_add.cold.15+0xf2/0xfb [ 4.085819] acpi_add_single_object+0x2a6/0x690 [ 4.085819] acpi_bus_check_add+0xc6/0x280 [ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa [ 4.085819] acpi_walk_namespace+0x9a/0xc2 [ 4.085819] acpi_bus_scan+0x78/0x90 [ 4.085819] acpi_scan_init+0xfa/0x248 [ 4.085819] acpi_init+0x2c1/0x321 [ 4.085819] do_one_initcall+0x44/0x1d0 [ 4.085819] kernel_init_freeable+0x1ab/0x1f4 This is because of the recent buffer overflow detection in the commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Here acpi_device_bus_id->bus_id can only hold 14 characters, while the the acpi_device_hid(device) returns a 22-char string "HYPER_V_GEN_COUNTER_V1". Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8 chars. The field bus_id in struct acpi_device_bus_id was originally defined as char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI devices") Fix the issue by changing the field bus_id to const char *, and use kstrdup_const() to initialize it. Signed-off-by: Dexuan Cui Tested-By: Jethro Beekman [ rjw: Subject change, whitespace adjustment ] Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: Avoid using power resources if there are none for D0

2020-06-20T08:25:01+00:00

commit 956ad9d98b73f59e442cc119c98ba1e04e94fe6d upstream. As recently reported, some platforms provide a list of power resources for device power state D3hot, through the _PR3 object, but they do not provide a list of power resources for device power state D0. Among other things, this causes acpi_device_get_power() to return D3hot as the current state of the device in question if all of the D3hot power resources are "on", because it sees the power_resources flag set and calls acpi_power_get_inferred_state() which finds that D3hot is the shallowest power state with all of the associated power resources turned "on", so that's what it returns. Moreover, that value takes precedence over the acpi_dev_pm_explicit_get() return value, because it means a deeper power state. The device may very well be in D0 physically at that point, however. Moreover, the presence of _PR3 without _PR0 for a given device means that only one D3-level power state can be supported by it. Namely, because there are no power resources to turn "off" when transitioning the device from D0 into D3cold (which should be supported since _PR3 is present), the evaluation of _PS3 should be sufficient to put it straight into D3cold, but this means that the effect of turning "on" the _PR3 power resources is unclear, so it is better to avoid doing that altogether. Consequently, there is no practical way do distinguish D3cold from D3hot for the device in question and the power states of it can be labeled so that D3hot is the deepest supported one (and Linux assumes that putting a device into D3hot via ACPI may cause power to be removed from it anyway, for legacy reasons). To work around the problem described above modify the ACPI enumeration of devices so that power resources are only used for device power management if the list of D0 power resources is not empty and make it mart D3cold as supported only if that is the case and the D3hot list of power resources is not empty too. Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057 Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/ Reported-by: Hans de Goede Tested-by: Hans de Goede Tested-by: youling257@gmail.com Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Initialize status to ACPI_STA_DEFAULT

2018-09-15T07:45:30+00:00

[ Upstream commit 5971b0c1594d6c34e257101ed5fdffec65205c50 ] Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices gets set to 0 by acpi_bus_type_and_status() and filled with its actual value later when acpi_add_single_object() calls acpi_bus_get_status(). This means that any acpi_match_device_ids() calls in between will always fail with -ENOENT. We already have a workaround for this, which temporary forces status to ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present() and the next commit in this series adds another acpi_match_device_ids() call between status being initialized as 0 and the acpi_bus_get_status() call. Rather then adding another workaround, this commit makes acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is safe to do as the only code looking at status between the initialization and the acpi_bus_get_status() call is those acpi_match_device_ids() calls. Note this does mean that we need to (re)set status to 0 in case the acpi_bus_get_status() call fails. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs

2018-04-26T09:02:16+00:00

[ Upstream commit 63347db0affadcbccd5613116ea8431c70139b3e ] The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some code to handle certain device quirks, in some cases we also need this quirk handling for the initial _STA call. Specifically on some devices calling _STA before all _DEP dependencies are met results in errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) acpi_get_bus_status already has code to avoid this, so by using it we also silence these errors from the initial _STA call. Note that in order for the acpi_get_bus_status handling for this to work, we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called, this means that battery devices will be instantiated with an initial status of 0. This is not a problem, acpi_bus_attach will get called soon after the instantiation anyways and it will update the status as first point of order. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Fix regression related to PM ops support in ECDT device

2017-12-05T10:26:33+00:00

commit a64a62ce9a380213dc9e192f762266d70c9b40ec upstream. On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga Tested-by: Luya Tshimbalanga Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:50:00+00:00

Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()

Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'

2017-09-03T21:54:03+00:00

* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks

Merge branches 'acpi-ec', 'acpi-dma', 'acpi-processor' and 'acpi-cppc'

2017-09-03T21:53:39+00:00

* acpi-ec: ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order * acpi-dma: ACPI/IORT: Add IORT named component memory address limits ACPI: Make acpi_dma_configure() DMA regions aware ACPI: Introduce DMA ranges parsing ACPI: Make acpi_dev_get_resources() method agnostic * acpi-processor: ACPI / processor: make function acpi_processor_check_duplicates() static ACPI: processor: use dev_dbg() instead of dev_warn() when CPPC probe failed * acpi-cppc: mailbox: pcc: Drop uninformative output during boot

ACPI / scan: Enable GPEs before scanning the namespace

2017-08-17T18:55:17+00:00

On some systems the platform firmware expects GPEs to be enabled before the enumeration of devices and if that expectation is not met, the systems in question may not boot in some situations. For this reason, change the initialization ordering of the ACPI subsystem to make it enable GPEs before scanning the namespace for the first time in order to enumerate devices. Reported-by: Mika Westerberg Suggested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Acked-by: Lv Zheng Tested-by: Mika Westerberg

ACPI: EC: Fix regression related to wrong ECDT initialization order

2017-08-17T18:52:19+00:00

Commit 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) introduced acpi_ec_ecdt_start(), but that function is invoked before acpi_ec_query_init(), which is too early. This causes the kernel to crash if an EC event occurs after boot, when ec_query_wq is not valid: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 ... Workqueue: events acpi_ec_event_handler task: ffff9f539790dac0 task.stack: ffffb437c0e10000 RIP: 0010:__queue_work+0x32/0x430 Normally, the DSDT EC should always be valid, so acpi_ec_ecdt_start() is actually a no-op in the majority of cases. However, commit c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) caused the probing of the DSDT EC as the "boot EC" to be skipped when the ECDT EC is valid and uncovered the bug. Fix this issue by invoking acpi_ec_ecdt_start() after acpi_ec_query_init() in acpi_ec_init(). Link: https://jira01.devtools.intel.com/browse/LCK-4348 Fixes: 2a5708409e4e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events) Fixes: c712bb58d827 (ACPI / EC: Add support to skip boot stage DSDT probe) Reported-by: Wang Wendy Tested-by: Feng Chenzhou Signed-off-by: Lv Zheng [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki