kernel/linux.git/drivers/acpi/ec.c, branch v4.19.16

ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th

2018-08-09T09:01:59+00:00

Commit 2c4d6baf1bc4 (ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems) changed the DMI table to match all systems where DMI product family is "Thinkpad X1 Carbon 6th". However, the system I have here has this string written differently (ThinkPad vs. Thinkpad) which makes the match fail. In addition to that, after BIOS upgrade Robin now has the same string than my system has (perhaps newer BIOS has changed the string). In any case add another DMI entry to acpi_ec_no_wakeup[] table hopefully covering all the X1 Carbon 6th systems out there. Fixes: 2c4d6baf1bc4 (ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems) Signed-off-by: Mika Westerberg [ rjw: Rebase and change the ident string to match the product familiy ] Signed-off-by: Rafael J. Wysocki

ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd

2018-08-06T08:14:47+00:00

Like on X1C6, on X1Y3 EC interrupts constantly wake up system from s2idle, the power consumption is extremely high. So make ec_no_wakeup be true as default to keep system in s2idle mode and reduce power consumption. Power button works when ec_no_wakeup=true. Signed-off-by: Aaron Ma Signed-off-by: Rafael J. Wysocki

ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems

2018-07-19T14:42:15+00:00

The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems beyond matched only a single DMI model (20KGS3JF01), that didn't cover my laptop (20KH002JUS). Change to match based on DMI product family to cover all X1 6th gen systems. Signed-off-by: Robin H. Johnson Signed-off-by: Rafael J. Wysocki

ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th

2018-06-18T11:32:37+00:00

On this system EC interrupt triggers constantly kicking devices out of low power states and thus blocking power management. The system also has a PCIe root port hosting Alpine Ridge Thunderbolt controller and it never gets a chance to go to D3cold because of this. Since the power button works the same regardless if EC interrupt is enabled or not during s2idle, add a quirk for this machine that sets ec_no_wakeup=true preventing spurious wakeups. Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI: EC: Dispatch the EC GPE directly on s2idle wake

2018-05-25T08:32:13+00:00

On platforms where the Low Power S0 Idle _DSM interface is used, on wakeup from suspend-to-idle, when it is known that the ACPI SCI has triggered while suspended, dispatch the EC GPE in order to catch all EC events that may have triggered the wakeup before carrying out the noirq phase of device resume. That is needed to handle power button wakeup on some platforms where the EC goes into a low-power mode during suspend-to-idle and while in that mode it will discard events after a timeout. If that timeout is shorter than the time it takes to complete the noirq resume of devices, looking for EC events after the latter is too late. Signed-off-by: Rafael J. Wysocki Reported-by: Zhang Rui Tested-by: Wendy Wang

ACPI / EC: Restore polling during noirq suspend/resume phases

2018-02-12T09:29:31+00:00

Commit 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression) modified the ACPI EC driver so that it doesn't switch over to busy polling mode during noirq stages of system suspend and resume in an attempt to fix an issue resulting from that behavior. However, that modification introduced a system resume regression on Thinkpad X240, so make the EC driver switch over to the polling mode during noirq stages of system suspend and resume again, which effectively reverts the problematic commit. Fixes: 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression) Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863 Reported-by: Markus Demleitner Tested-by: Markus Demleitner Signed-off-by: Rafael J. Wysocki

ACPI: EC: Fix debugfs_create_*() usage

2018-01-04T12:54:51+00:00

acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose the wrong half on big-endian 64-bit systems. Fix this by changing its type to "u32" and removing the cast, as all other code already uses u32 or sometimes even only u8. Fixes: 1195a098168fcacf (ACPI: Provide /sys/kernel/debug/ec/...) Signed-off-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-ec' into acpi

2017-11-30T12:37:29+00:00

* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device

ACPI / EC: Fix regression related to PM ops support in ECDT device

2017-11-20T23:13:02+00:00

On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga Tested-by: Luya Tshimbalanga Cc: 4.9+ # 4.9+ Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

2017-11-15T21:46:33+00:00

Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()