kernel/linux.git/drivers/acpi/device_pm.c, branch v5.10.257

ACPI: Add quirks for AMD Renoir/Lucienne CPUs to force the D3 hint

2024-07-05T07:12:45+00:00

[ Upstream commit 6485fc18faa01e8845b1e5bb55118e633f84d1f2 ] AMD systems from Renoir and Lucienne require that the NVME controller is put into D3 over a Modern Standby / suspend-to-idle cycle. This is "typically" accomplished using the `StorageD3Enable` property in the _DSD, but this property was introduced after many of these systems launched and most OEM systems don't have it in their BIOS. On AMD Renoir without these drives going into D3 over suspend-to-idle the resume will fail with the NVME controller being reset and a trace like this in the kernel logs: ``` [ 83.556118] nvme nvme0: I/O 161 QID 2 timeout, aborting [ 83.556178] nvme nvme0: I/O 162 QID 2 timeout, aborting [ 83.556187] nvme nvme0: I/O 163 QID 2 timeout, aborting [ 83.556196] nvme nvme0: I/O 164 QID 2 timeout, aborting [ 95.332114] nvme nvme0: I/O 25 QID 0 timeout, reset controller [ 95.332843] nvme nvme0: Abort status: 0x371 [ 95.332852] nvme nvme0: Abort status: 0x371 [ 95.332856] nvme nvme0: Abort status: 0x371 [ 95.332859] nvme nvme0: Abort status: 0x371 [ 95.332909] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -16 [ 95.332936] nvme 0000:03:00.0: PM: failed to resume async: error -16 ``` The Microsoft documentation for StorageD3Enable mentioned that Windows has a hardcoded allowlist for D3 support, which was used for these platforms. Introduce quirks to hardcode them for Linux as well. As this property is now "standardized", OEM systems using AMD Cezanne and newer APU's have adopted this property, and quirks like this should not be necessary. CC: Shyam-sundar S-k CC: Alexander Deucher CC: Prike Liang Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello Acked-by: Rafael J. Wysocki Tested-by: Julian Sikorski Signed-off-by: Christoph Hellwig Stable-dep-of: e79a10652bbd ("ACPI: x86: Force StorageD3Enable on more products") Signed-off-by: Sasha Levin

ACPI: Check StorageD3Enable _DSD property in ACPI code

2023-10-10T19:53:33+00:00

[ Upstream commit 2744d7a0733503931b71c00d156119ced002f22c ] Although first implemented for NVME, this check may be usable by other drivers as well. Microsoft's specification explicitly mentions that is may be usable by SATA and AHCI devices. Google also indicates that they have used this with SDHCI in a downstream kernel tree that a user can plug a storage device into. Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Suggested-by: Keith Busch CC: Shyam-sundar S-k CC: Alexander Deucher CC: Rafael J. Wysocki CC: Prike Liang Signed-off-by: Mario Limonciello Reviewed-by: Rafael J. Wysocki Signed-off-by: Christoph Hellwig Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none") Signed-off-by: Sasha Levin

ACPI: PM / fan: Put fan device IDs into separate header file

2021-07-14T14:56:11+00:00

[ Upstream commit b9370dceabb7841c5e65ce4ee4405b9db5231fc4 ] The ACPI fan device IDs are shared between the fan driver and the device power management code. The former is modular, so it needs to include the table of device IDs for module autoloading and the latter needs that list to avoid attaching the generic ACPI PM domain to fan devices (which doesn't make sense) possibly before the fan driver module is loaded. Unfortunately, that requires the list of fan device IDs to be updated in two places which is prone to mistakes, so put it into a symbol definition in a separate header file so there is only one copy of it in case it needs to be updated again in the future. Fixes: b9ea0bae260f ("ACPI: PM: Avoid attaching ACPI PM domain to certain devices") Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: PM: Add ACPI ID of Alder Lake Fan

2021-05-19T08:12:51+00:00

commit 2404b8747019184002823dba7d2f0ecf89d802b7 upstream. Add a new unique fan ACPI device ID for Alder Lake to support it in acpi_dev_pm_attach() function. Fixes: 38748bcb940e ("ACPI: DPTF: Support Alder Lake") Signed-off-by: Sumeet Pawnikar Acked-by: Zhang Rui Cc: 5.10+ # 5.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()

2020-12-30T10:54:05+00:00

commit 7482c5cb90e5a7f9e9e12dd154d405e0219656e3 upstream. The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to be reference counted for wakeup enabling, because they may be enabled to signal wakeup on behalf of their subordinate devices and that may happen for multiple times in a row, whereas for the other devices it only makes sense to enable wakeup signaling once. However, this becomes problematic if the bridge itself is suspended, because it is treated as a "regular" device in that case and the reference counting doesn't work. For instance, suppose that there are two devices below a bridge and they both can signal wakeup. Every time one of them is suspended, wakeup signaling is enabled for the bridge, so when they both have been suspended, the bridge's wakeup reference counter value is 2. Say that the bridge is suspended subsequently and acpi_pci_wakeup() is called for it. Because the bridge can signal wakeup, that function will invoke acpi_pm_set_device_wakeup() to configure it and __acpi_pm_set_device_wakeup() will be called with the last argument equal to 1. This causes __acpi_device_wakeup_enable() invoked by it to omit the reference counting, because the reference counter of the target device (the bridge) is 2 at that time. Now say that the bridge resumes and one of the device below it resumes too, so the bridge's reference counter becomes 0 and wakeup signaling is disabled for it, but there is still the other suspended device which may need the bridge to signal wakeup on its behalf and that is not going to work. To address this scenario, use wakeup enable reference counting for all devices, not just for bridges, so drop the last argument from __acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(), which causes acpi_pm_set_device_wakeup() and acpi_pm_set_bridge_wakeup() to become identical, so drop the latter and use the former instead of it everywhere. Fixes: 1ba51a7c1496 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()") Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas Cc: 4.14+ # 4.14+ Signed-off-by: Greg Kroah-Hartman

Merge branches 'pm-cpufreq' and 'pm-acpi'

2020-06-10T15:10:40+00:00

* pm-cpufreq: cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag * pm-acpi: ACPI: PM: Avoid using power resources if there are none for D0

ACPI: PM: Avoid using power resources if there are none for D0

2020-06-08T11:31:24+00:00

As recently reported, some platforms provide a list of power resources for device power state D3hot, through the _PR3 object, but they do not provide a list of power resources for device power state D0. Among other things, this causes acpi_device_get_power() to return D3hot as the current state of the device in question if all of the D3hot power resources are "on", because it sees the power_resources flag set and calls acpi_power_get_inferred_state() which finds that D3hot is the shallowest power state with all of the associated power resources turned "on", so that's what it returns. Moreover, that value takes precedence over the acpi_dev_pm_explicit_get() return value, because it means a deeper power state. The device may very well be in D0 physically at that point, however. Moreover, the presence of _PR3 without _PR0 for a given device means that only one D3-level power state can be supported by it. Namely, because there are no power resources to turn "off" when transitioning the device from D0 into D3cold (which should be supported since _PR3 is present), the evaluation of _PS3 should be sufficient to put it straight into D3cold, but this means that the effect of turning "on" the _PR3 power resources is unclear, so it is better to avoid doing that altogether. Consequently, there is no practical way do distinguish D3cold from D3hot for the device in question and the power states of it can be labeled so that D3hot is the deepest supported one (and Linux assumes that putting a device into D3hot via ACPI may cause power to be removed from it anyway, for legacy reasons). To work around the problem described above modify the ACPI enumeration of devices so that power resources are only used for device power management if the list of D0 power resources is not empty and make it mart D3cold as supported only if that is the case and the D3hot list of power resources is not empty too. Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057 Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/ Reported-by: Hans de Goede Tested-by: Hans de Goede Tested-by: youling257@gmail.com Cc: 3.10+ # 3.10+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Hans de Goede

Merge branches 'pm-core' and 'pm-sleep'

2020-06-01T13:19:08+00:00

* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling

PM: ACPI: Output correct message on target power state

2020-04-27T08:33:40+00:00

Transitioned power state logged at the end of setting ACPI power. However, D3cold won't be in the message because state can only be D3hot at most. Use target_state to corretly report when power state is D3cold. Cc: All applicable Signed-off-by: Kai-Heng Feng Signed-off-by: Rafael J. Wysocki

PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended()

2020-04-24T19:32:41+00:00

Because all callers of dev_pm_smart_suspend_and_suspended use it only for checking whether or not to skip driver suspend callbacks for a device, rename it to dev_pm_skip_suspend() in analogy with dev_pm_skip_resume(). No functional impact. Suggested-by: Alan Stern Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Acked-by: Bjorn Helgaas