kernel/linux.git/drivers/acpi/button.c, branch v5.4.50

ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

2020-02-24T07:36:43+00:00

[ Upstream commit 0528904926aab19bffb2068879aa44db166c6d5f ] Running evemu-record on the lid switch event shows that the lid reports the first "close" but then never reports an "open". This causes systemd to continuously re-suspend the laptop every 30s. Resetting the _LID to "open" fixes the issue. Signed-off-by: Jason Ekstrand Reviewed-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: button: Add DMI quirk for Medion Akoya E2215T

2019-12-31T15:44:26+00:00

[ Upstream commit 932e1ba486117de2fcea3df27ad8218ad6c11470 ] The Medion Akoya E2215T's ACPI _LID implementation is quite broken: 1. For notifications it uses an ActiveLow Edge GpioInt, rather then an ActiveBoth one, meaning that the device is only notified when the lid is closed, not when it is opened. 2. Matching with this its _LID method simply always returns 0 (closed) In order for the Linux LID code to work properly with this implementation, the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN. This commit adds a DMI quirk for this. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

ACPI: button: reinitialize button state upon resume

2019-04-12T08:29:01+00:00

With commit dfa46c50f65b ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode"), the lid device is considered to be not compliant to SW_LID if the Lid state is unchanged when updating it. This is not wrong, but we overlooked the resume case, where Lid state is updated unconditionally in the button driver .resume() callback. And this results in warning message "ACPI: button: The lid device is not compliant to SW_LID." after resume, if the machine is suspended with Lid opened and then resumed with Lid opened. Fix this by flushing the cached lid state before updating the Lid device in .resume() callback. Fixes: dfa46c50f65b ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode") Reported-and-tested-by: Zhao Lijian Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki

ACPI / button: fix defined but not used warning

2018-07-09T09:32:44+00:00

Fix a build warning in the ACPI button driver when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/acpi/button.c:252:12: warning: 'acpi_button_state_seq_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki

ACPI / button: increment wakeup count only when notified

2018-07-02T11:17:13+00:00

Because acpi_lid_initialize_state() is called on every system resume and it triggers acpi_lid_notify_state() which invokes acpi_pm_wakeup_event() for the lid device, the lid's wakeup count is incremented even if the lid was not the source of the event that woke up the system. That behavior confuses user space deamons using wakeup_count to identify the potential system wakeup source. To avoid the confusion, only trigger acpi_pm_wakeup_event() in the acpi_button_notify() path and don't do that in the acpi_lid_initialize_state() path. Signed-off-by: Ravi Chandra Sadineni Signed-off-by: Rafael J. Wysocki

proc: introduce proc_create_single{,_data}

2018-05-16T05:23:35+00:00

Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig

ACPI / button: make module loadable when booted in non-ACPI mode

2018-04-24T10:47:34+00:00

Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not. So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel. Signed-off-by: Ard Biesheuvel [ rjw: Minor adjustments of comments, whitespace and names. ] Signed-off-by: Rafael J. Wysocki

ACPI: button: Add a LID switch blacklist and add 1 model to it

2017-12-13T00:05:02+00:00

The GP-electronic T701 tablet does not have a LID switch, but it does define a LID device in its DSDT. The _LID method points to the "\\_SB.GPO2" pin 0x18 GPIO with a pull setting of "PullDefault", which leaves the pin floating. This causes the ACPI button driver to cause spurious LID closed events, causing the device to suspend while the user is using it. There is nothing the ACPI button driver (or the gpio code) can do to fix this, so the only solution is to add a DMI based blacklist and ignore the LID device on these tablets. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI: button: Add a debug message when we're sending a LID event

2017-12-13T00:05:01+00:00

I've been debugging some spurious suspend issues on various devices, at least on some devices these spurious suspends are caused by surious LID closed events being send to userspace. Running e.g. evemu-record after noticing a spurious suspend is too late to detect that a LID closed event it the (probable) cause of this. This commit adds an acpi_handle_debug call to help debugging this. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki