kernel/linux.git/drivers/acpi/acpi_processor.c, branch v4.11.5

acpi/processor: Check for duplicate processor ids at hotplug time

2017-03-11T13:41:20+00:00

The check for duplicate processor ids happens at boot time based on the ACPI table contents, but the final sanity checks for a processor happen at hotplug time. At hotplug time, where the physical information is available, which might differ from the ACPI table information, a check for duplicate processor ids is missing. Add it to the hotplug checks and rename the function so it better reflects its purpose. Signed-off-by: Dou Liyang Tested-by: Xiaolong Ye Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-6-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

acpi/processor: Implement DEVICE operator for processor enumeration

2017-03-11T13:41:20+00:00

ACPI allows to declare processors either with the PROCESSOR or with the DEVICE operator. The current implementation handles only the PROCESSOR operator. On a system which uses the DEVICE operator for processor enumeration the evaluation fails. Check for the ACPI type of the ACPI handle and evaluate PROCESSOR and DEVICE types separately. Signed-off-by: Dou Liyang Tested-by: Xiaolong Ye Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-5-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"

2017-03-11T13:41:18+00:00

Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: Dou Liyang Tested-by: Xiaolong Ye Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug

2017-02-07T12:34:56+00:00

We may or may not have all possible CPUs in MADT on boot but in any case we're overwriting x86_cpu_to_acpiid mapping with U32_MAX when acpi_register_lapic() is called again on the CPU hotplug path: acpi_processor_hotadd_init() -> acpi_map_cpu() -> acpi_register_lapic() As we have the required acpi_id information in acpi_processor_hotadd_init() propagate it to acpi_map_cpu() to always keep x86_cpu_to_acpiid mapping valid. Reported-by: Andrew Jones Signed-off-by: Vitaly Kuznetsov Signed-off-by: Rafael J. Wysocki

acpi: Validate processor id when mapping the processor

2016-09-21T19:18:40+00:00

When we want to identify whether the proc_id is unreasonable or not, we can call the "acpi_processor_validate_proc_id" function. It will search in the duplicate IDs. If we find the proc_id in the IDs, we return true to the call function. Conversely, the false represents available. When we establish all possible cpuid <-> nodeid mapping to handle the cpu hotplugs, we will use the proc_id from ACPI table. We do validation when we get the proc_id. If the result is true, we will stop the mapping. [ tglx: Mark the new function __init ] Signed-off-by: Dou Liyang Acked-by: Ingo Molnar Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-8-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

acpi: Provide mechanism to validate processors in the ACPI tables

2016-09-21T19:18:39+00:00

[Problem] When we set cpuid <-> nodeid mapping to be persistent, it will use the DSDT As we know, the ACPI tables are just like user's input in that respect, and we don't crash if user's input is unreasonable. Such as, the mapping of the proc_id and pxm in some machine's ACPI table is like this: proc_id | pxm -------------------- 0 <-> 0 1 <-> 0 2 <-> 1 3 <-> 1 89 <-> 0 89 <-> 0 89 <-> 0 89 <-> 1 89 <-> 1 89 <-> 2 89 <-> 3 ..... We can't be sure which one is correct to the proc_id 89. We may map a wrong node to a cpu. When pages are allocated, this may cause a kernal panic. So, we should provide mechanisms to validate the ACPI tables, just like we do validation to check user's input in web project. The mechanism is that the processor objects which have the duplicate IDs are not valid. [Solution] We add a validation function, like this: foreach Processor in DSDT proc_id = get_ACPI_Processor_number(Processor) if (proc_id exists ) mark both of them as being unreasonable; The function will record the unique or duplicate processor IDs. The duplicate processor IDs such as 89 are regarded as the unreasonable IDs which mean that the processor objects in question are not valid. [ tglx: Add __init[data] annotations ] Signed-off-by: Dou Liyang Acked-by: Ingo Molnar Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-7-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

x86/acpi: Set persistent cpuid <-> nodeid mapping when booting

2016-09-21T19:18:39+00:00

x86/acpi: Enable MADT APIs to return disabled apicids

2016-09-21T19:18:39+00:00

The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 3. There are four mappings in the kernel: 1. nodeid (logical node id) <-> pxm (persistent) 2. apicid (physical cpu id) <-> nodeid (persistent) 3. cpuid (logical cpu id) <-> apicid (not persistent, now persistent by step 2) 4. cpuid (logical cpu id) <-> nodeid (not persistent) So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs, we should: 1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2. 2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should obtain all apicids from MADT. All processors' apicids can be obtained by _MAT method or from MADT in ACPI. The current code ignores disabled processors and returns -ENODEV. After this patch, a new parameter will be added to MADT APIs so that caller is able to control if disabled processors are ignored. Signed-off-by: Gu Zheng Signed-off-by: Tang Chen Signed-off-by: Zhu Guihua Signed-off-by: Dou Liyang Acked-by: Ingo Molnar Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-5-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner

ACPI / processor: Avoid reserving IO regions too early

2016-06-01T23:57:50+00:00

Roland Dreier reports that one of his systems cannot boot because of the changes made by commit ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure). The problematic part of it is the request_region() call in acpi_processor_get_info() that used to run at module init time before the above commit and now it runs much earlier. Unfortunately, the region(s) reserved by it fall into a range the PCI subsystem attempts to reserve for AHCI IO BARs. As a result, the PCI reservation fails and AHCI doesn't work, while previously the PCI reservation would be made before acpi_processor_get_info() and it would succeed. That request_region() call, however, was overlooked by commit ac212b6980d8, as it is not necessary for the enumeration of the processors. It only is needed when the ACPI processor driver actually attempts to handle them which doesn't happen before loading the ACPI processor driver module. Therefore that call should have been moved from acpi_processor_get_info() into that module. Address the problem by moving the request_region() call in question out of acpi_processor_get_info() and use the observation that the region reserved by it is only needed if the FADT-based CPU throttling method is going to be used, which means that it should be sufficient to invoke it from acpi_processor_get_throttling_fadt(). Fixes: ac212b6980d8 (ACPI / processor: Use common hotplug infrastructure) Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Rafael J. Wysocki

ACPI / processor: Request native thermal interrupt handling via _OSC

2016-03-26T01:00:38+00:00

There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki