kernel/linux.git/block/Makefile, branch v6.6.131

block: move the code to do early boot lookup of block devices to block/

2023-06-05T16:57:40+00:00

Create a new block/early-lookup.c to keep the early block device lookup code instead of having this code sit with the early mount code. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.de Signed-off-by: Jens Axboe

blk-mq-rdma: remove queue mapping helper for rdma devices

2023-04-13T06:59:05+00:00

No rdma device exposes its irq vectors affinity today. So the only mapping that we have left, is the default blk_mq_map_queues, which we fallback to anyways. Also fixup the only consumer of this helper (nvme-rdma). Remove this now dead code. Signed-off-by: Sagi Grimberg Acked-by: Keith Busch Signed-off-by: Christoph Hellwig

blk-cgroup: move blkcg_{get,set}_fc_appid out of line

2022-05-02T20:06:20+00:00

No need to have these helpers inline. Also remove the stubs and just use an IS_ENABLED for the get side (the set side already is only built conditionlly). Signed-off-by: Christoph Hellwig Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20220420042723.1010598-5-hch@lst.de Signed-off-by: Jens Axboe

blk-crypto: show crypto capabilities in sysfs

2022-02-28T13:40:23+00:00

Add sysfs files that expose the inline encryption capabilities of request queues: /sys/block/$disk/queue/crypto/max_dun_bits /sys/block/$disk/queue/crypto/modes/$mode /sys/block/$disk/queue/crypto/num_keyslots Userspace can use these new files to decide what encryption settings to use, or whether to use inline encryption at all. This also brings the crypto capabilities in line with the other queue properties, which are already discoverable via the queue directory in sysfs. Design notes: - Place the new files in a new subdirectory "crypto" to group them together and to avoid complicating the main "queue" directory. This also makes it possible to replace "crypto" with a symlink later if we ever make the blk_crypto_profiles into real kobjects (see below). - It was necessary to define a new kobject that corresponds to the crypto subdirectory. For now, this kobject just contains a pointer to the blk_crypto_profile. Note that multiple queues (and hence multiple such kobjects) may refer to the same blk_crypto_profile. An alternative design would more closely match the current kernel data structures: the blk_crypto_profile could be a kobject itself, located directly under the host controller device's kobject, while /sys/block/$disk/queue/crypto would be a symlink to it. I decided not to do that for now because it would require a lot more changes, such as no longer embedding blk_crypto_profile in other structures, and also because I'm not sure we can rule out moving the crypto capabilities into 'struct queue_limits' in the future. (Even if multiple queues share the same crypto engine, maybe the supported data unit sizes could differ due to other queue properties.) It would also still be possible to switch to that design later without breaking userspace, by replacing the directory with a symlink. - Use "max_dun_bits" instead of "max_dun_bytes". Currently, the kernel internally stores this value in bytes, but that's an implementation detail. It probably makes more sense to talk about this value in bits, and choosing bits is more future-proof. - "modes" is a sub-subdirectory, since there may be multiple supported crypto modes, sysfs is supposed to have one value per file, and it makes sense to group all the mode files together. - Each mode had to be named. The crypto API names like "xts(aes)" are not appropriate because they don't specify the key size. Therefore, I assigned new names. The exact names chosen are arbitrary, but they happen to match the names used in log messages in fs/crypto/. - The "num_keyslots" file is a bit different from the others in that it is only useful to know for performance reasons. However, it's included as it can still be useful. For example, a user might not want to use inline encryption if there aren't very many keyslots. Reviewed-by: Hannes Reinecke Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20220124215938.2769-4-ebiggers@kernel.org Signed-off-by: Jens Axboe

block: remove blk-exec.c

2021-11-29T13:34:50+00:00

All this code is tightly coupled to the blk-mq core, so move it there. Signed-off-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20211117061404.331732-4-hch@lst.de [axboe: remove doc generation for blk-exec.c] Signed-off-by: Jens Axboe

block: Add independent access ranges support

2021-10-27T02:36:47+00:00

The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Martin K. Petersen Reviewed-by: Keith Busch Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

blk-crypto: rename keyslot-manager files to blk-crypto-profile

2021-10-21T16:49:32+00:00

In preparation for renaming struct blk_keyslot_manager to struct blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c source files. Renaming these files separately before making a lot of changes to their contents makes it easier for git to understand that they were renamed. Acked-by: Ulf Hansson # For MMC Reviewed-by: Christoph Hellwig Reviewed-by: Mike Snitzer Reviewed-by: Martin K. Petersen Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org Signed-off-by: Jens Axboe

block: move CONFIG_BLOCK guard to top Makefile

2021-10-18T12:17:35+00:00

Every object under block/ depends on CONFIG_BLOCK. Move the guard to the top Makefile since there is no point to descend into block/ if CONFIG_BLOCK=n. Signed-off-by: Masahiro Yamada Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210927140000.866249-5-masahiroy@kernel.org Signed-off-by: Jens Axboe

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

2021-09-11T17:19:51+00:00

Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix nvmet command set reporting for passthrough controllers (Adam Manzanares) - update a MAINTAINERS email address (Chaitanya Kulkarni) - set QUEUE_FLAG_NOWAIT for nvme-multipth (me) - handle errors from add_disk() (Luis Chamberlain) - update the keep alive interval when kato is modified (Tatsuya Sasaki) - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke) - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner) - only call synchronize_srcu when clearing current path (Daniel Wagner) - revalidate paths during rescan (Hannes Reinecke) - Split out the fs/block_dev into block/fops.c and block/bdev.c, which has been long overdue. Do this now before -rc1, to avoid annoying conflicts due to this (Christoph) - blk-throtl use-after-free fix (Li) - Improve plug depth for multi-device plugs, greatly increasing md resync performance (Song) - blkdev_show() locking fix (Tetsuo) - n64cart error check fix (Yang) * tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block: n64cart: fix return value check in n64cart_probe() blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues block: move fs/block_dev.c to block/bdev.c block: split out operations on block special files blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() block: genhd: don't call blkdev_show() with major_names_lock held nvme: update MAINTAINERS email address nvme: add error handling support for add_disk() nvme: only call synchronize_srcu when clearing current path nvme: update keep alive interval when kato is modified nvme-tcp: Do not reset transport on data digest errors nvmet: fixup buffer overrun in nvmet_subsys_attr_serial() nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req nvmet: looks at the passthrough controller when initializing CAP nvme: move nvme_multi_css into nvme.h nvme-multipath: revalidate paths during rescan nvme-multipath: set QUEUE_FLAG_NOWAIT

block: move fs/block_dev.c to block/bdev.c

2021-09-07T14:39:40+00:00

Move it together with the rest of the block layer. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210907141303.1371844-3-hch@lst.de Signed-off-by: Jens Axboe