kernel/linux.git/arch, branch v6.5.13

powerpc/powernv: Fix fortify source warnings in opal-prd.c

2023-11-28T17:15:19+00:00

commit feea65a338e52297b68ceb688eaf0ffc50310a83 upstream. As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a FORTIFY_SOURCE warning: memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4) WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd] NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd] LR opal_prd_msg_notifier+0x170/0x188 [opal_prd] Call Trace: opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable) notifier_call_chain+0xc0/0x1b0 atomic_notifier_call_chain+0x2c/0x40 opal_message_notify+0xf4/0x2c0 This happens because the copy is targeting item->msg, which is only 4 bytes in size, even though the enclosing item was allocated with extra space following the msg. To fix the warning define struct opal_prd_msg with a union of the header and a flex array, and have the memcpy target the flex array. Reported-by: "Aneesh Kumar K.V" Reported-by: Mahesh Salgaonkar Tested-by: Mahesh Salgaonkar Reviewed-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman

riscv: kprobes: allow writing to x0

2023-11-28T17:15:15+00:00

commit 8cb22bec142624d21bc85ff96b7bad10b6220e6a upstream. Instructions can write to x0, so we should simulate these instructions normally. Currently, the kernel hangs if an instruction who writes to x0 is simulated. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao Reviewed-by: Charlie Jenkins Acked-by: Guo Ren Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

riscv: correct pt_level name via pgtable_l5/4_enabled

2023-11-28T17:15:14+00:00

commit e59e5e2754bf983fc58ad18f99b5eec01f1a0745 upstream. The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names. But if page mode is downgraded from kernel cmdline or restricted by the hardware in 64BIT, it will give a wrong name. Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD" that should be "PGD": 0xffffffd840000000-0xffffffd900000000 0x00000000c0000000 3G PUD D A G . . W R V So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it. Fixes: e8a62cc26ddf ("riscv: Implement sv48 support") Reviewed-by: Alexandre Ghiti Signed-off-by: Song Shuai Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

riscv: mm: Update the comment of CONFIG_PAGE_OFFSET

2023-11-28T17:15:14+00:00

commit 559fe94a449cba5b50a7cffea60474b385598c00 upstream. Since the commit 011f09d12052 set sv57 as default for CONFIG_64BIT, the comment of CONFIG_PAGE_OFFSET should be updated too. Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly") Signed-off-by: Song Shuai Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

riscv: put interrupt entries into .irqentry.text

2023-11-28T17:15:14+00:00

commit 87615e95f6f9ccd36d4a3905a2d87f91967ea9d2 upstream. The interrupt entries are expected to be in the .irqentry.text section. For example, for kprobes to work properly, exception code cannot be probed; this is ensured by blacklisting addresses in the .irqentry.text section. Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Signed-off-by: Nam Cao Link: https://lore.kernel.org/r/20230821145708.21270-1-namcaov@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause

2023-11-28T17:15:14+00:00

commit dd16ac404a685cce07e67261a94c6225d90ea7ba upstream. Actually it is a part of Conor's commit aae538cd03bc ("riscv: fix detection of toolchain Zihintpause support"). It is looks like a merge issue. Samuel's commit 0b1d60d6dd9e ("riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and revert to __riscv_zihintpause. So this patch can fix it. Signed-off-by: Minda Chen Fixes: 3c349eacc559 ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"") Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20230802064215.31111-1-minda.chen@starfivetech.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

LoongArch: Mark __percpu functions as always inline

2023-11-28T17:15:14+00:00

commit 71945968d8b128c955204baa33ec03bdd91bdc26 upstream. A recent change to the optimization pipeline in LLVM reveals some fragility around the inlining of LoongArch's __percpu functions, which manifests as a BUILD_BUG() failure: In file included from kernel/sched/build_policy.c:17: In file included from include/linux/sched/cputime.h:5: In file included from include/linux/sched/signal.h:5: In file included from include/linux/rculist.h:11: In file included from include/linux/rcupdate.h:26: In file included from include/linux/irqflags.h:18: arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed 97 | BUILD_BUG(); | ^ include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG' 59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") | ^ include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG' 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) | ^ include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert' 425 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert' 413 | __compiletime_assert(condition, msg, prefix, suffix) | ^ include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert' 406 | prefix ## suffix(); \ | ^ :86:1: note: expanded from here 86 | __compiletime_assert_51 | ^ 1 error generated. If these functions are not inlined (which the compiler is free to do even with functions marked with the standard 'inline' keyword), the BUILD_BUG() in the default case cannot be eliminated since the compiler cannot prove it is never used, resulting in a build failure due to the error attribute. Mark these functions as __always_inline to guarantee inlining so that the BUILD_BUG() only triggers when the default case genuinely cannot be eliminated due to an unexpected size. Cc: Closes: https://github.com/ClangBuiltLinux/linux/issues/1955 Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support") Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e Suggested-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman

parisc/pgtable: Do not drop upper 5 address bits of physical address

2023-11-28T17:15:10+00:00

commit 166b0110d1ee53290bd11618df6e3991c117495a upstream. When calculating the pfn for the iitlbt/idtlbt instruction, do not drop the upper 5 address bits. This doesn't seem to have an effect on physical hardware which uses less physical address bits, but in qemu the missing bits are visible. Signed-off-by: Helge Deller Cc: Signed-off-by: Greg Kroah-Hartman

parisc: Prevent booting 64-bit kernels on PA1.x machines

2023-11-28T17:15:10+00:00

commit a406b8b424fa01f244c1aab02ba186258448c36b upstream. Bail out early with error message when trying to boot a 64-bit kernel on 32-bit machines. This fixes the previous commit to include the check for true 64-bit kernels as well. Signed-off-by: Helge Deller Fixes: 591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines") Cc: # v6.0+ Signed-off-by: Greg Kroah-Hartman

s390/cmma: fix detection of DAT pages

2023-11-28T17:15:08+00:00

commit 44d93045247661acbd50b1629e62f415f2747577 upstream. If the cmma no-dat feature is available the kernel page tables are walked to identify and mark all pages which are used for address translation (all region, segment, and page tables). In a subsequent loop all other pages are marked as "no-dat" pages with the ESSA instruction. This information is visible to the hypervisor, so that the hypervisor can optimize purging of guest TLB entries. The initial loop however is incorrect: only the first three of the four pages which belong to segment and region tables will be marked as being used for DAT. The last page is incorrectly marked as no-dat. This can result in incorrect guest TLB flushes. Fix this by simply marking all four pages. Cc: Reviewed-by: Claudio Imbrenda Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman