kernel/linux.git/arch, branch v6.1.31

arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay

2023-05-30T13:03:33+00:00

commit f161cea5a20f3aeeb637a88ad1705fc2720b4d58 upstream. While testing the ethernet interface on a Variscite symphony carrier board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware configuration), the ethernet PHY is not detected. The ADIN1300 datasheet indicate that the "Management interface active (t4)" state is reached at most 5ms after the reset signal is deasserted. The device tree in Variscite custom git repository uses the following property: phy-reset-post-delay = <20>; Add a new MDIO property 'reset-deassert-us' of 20ms to have the same delay inside the ethphy node. Adding this property fixes the problem with the PHY detection. Note that this SOM can also have an Atheros AR8033 PHY. In this case, a 1ms deassert delay is sufficient. Add a comment to that effect. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

x86/show_trace_log_lvl: Ensure stack pointer is aligned, again

2023-05-30T13:03:32+00:00

commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream. The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") tried to align the stack pointer in show_trace_log_lvl(), otherwise the "stack < stack_info.end" check can't guarantee that the last read does not go past the end of the stack. However, we have the same problem with the initial value of the stack pointer, it can also be unaligned. So without this patch this trivial kernel module #include static int init(void) { asm volatile("sub $0x4,%rsp"); dump_stack(); asm volatile("add $0x4,%rsp"); return -EAGAIN; } module_init(init); MODULE_LICENSE("GPL"); crashes the kernel. Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") Signed-off-by: Vernon Lovejoy Signed-off-by: Oleg Nesterov Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com Signed-off-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman

x86/pci/xen: populate MSI sysfs entries

2023-05-30T13:03:22+00:00

commit 335b4223466dd75f9f3ea4918187afbadd22e5c8 upstream. Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the creation of sysfs entries for MSI IRQs. The creation used to be in msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs. Then it moved into __msi_domain_alloc_irqs which is an implementation of domain_alloc_irqs. However, Xen comes with the only other implementation of domain_alloc_irqs and hence doesn't run the sysfs population code anymore. Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info but that doesn't actually have an effect because Xen uses it's own domain_alloc_irqs implementation. Fix this by making use of the fallback functions for sysfs population. Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling") Signed-off-by: Maximilian Heyne Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator

2023-05-30T13:03:22+00:00

commit 91aa4b3782448a7a13baa8cbcdfd5fd19defcbd9 upstream. This worked before by coincidence, as the regulator was probed and enabled before PCI RC probe. But probe order changed since commit 259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14") and PCIe supply is enabled after RC. Fix this by adding the regulator to RC node. The PCIe vaux regulator still needs to be enabled unconditionally for Mini-PCIe USB-only devices. Fixes: ef3846247b41 ("ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees") Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms

2023-05-30T13:03:19+00:00

commit edc0a2b5957652f4685ef3516f519f84807087db upstream. Traditionally, all CPUs in a system have identical numbers of SMT siblings. That changes with hybrid processors where some logical CPUs have a sibling and others have none. Today, the CPU boot code sets the global variable smp_num_siblings when every CPU thread is brought up. The last thread to boot will overwrite it with the number of siblings of *that* thread. That last thread to boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it is an Ecore, smp_num_siblings == 1. smp_num_siblings describes if the *system* supports SMT. It should specify the maximum number of SMT threads among all cores. Ensure that smp_num_siblings represents the system-wide maximum number of siblings by always increasing its value. Never allow it to decrease. On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are not updated in any cpu sibling map because the system is treated as an UP system when probing Ecore CPUs. Below shows part of the CPU topology information before and after the fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore). ... -/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff -/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11 +/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21 ... -/sys/devices/system/cpu/cpu12/topology/package_cpus:001000 -/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12 +/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21 Notice that the "before" 'package_cpus_list' has only one CPU. This means that userspace tools like lscpu will see a little laptop like an 11-socket system: -Core(s) per socket: 1 -Socket(s): 11 +Core(s) per socket: 16 +Socket(s): 1 This is also expected to make the scheduler do rather wonky things too. [ dhansen: remove CPUID detail from changelog, add end user effects ] CC: stable@kernel.org Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology") Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()") Suggested-by: Len Brown Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Acked-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman

perf/x86/uncore: Correct the number of CHAs on SPR

2023-05-30T13:03:19+00:00

commit 38776cc45eb7603df4735a0410f42cffff8e71a1 upstream. The number of CHAs from the discovery table on some SPR variants is incorrect, because of a firmware issue. An accurate number can be read from the MSR UNC_CBO_CONFIG. Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support") Reported-by: Stephane Eranian Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Tested-by: Stephane Eranian Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman

parisc: Handle kprobes breakpoints only in kernel context

2023-05-30T13:03:18+00:00

commit df419492e428b6a2bce98d0f613c58a13da6666c upstream. The kernel kprobes break instructions should only be handled when running in kernel context. Cc: # v5.18+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Enable LOCKDEP support

2023-05-30T13:03:18+00:00

commit adf8e96a7ea670d45b5de7594acc67e8f4787ae6 upstream. Cc: # v6.0+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Allow to reboot machine after system halt

2023-05-30T13:03:18+00:00

commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream. In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: # v4.14+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Fix flush_dcache_page() for usage from irq context

2023-05-30T13:03:18+00:00

commit 61e150fb310729c98227a5edf6e4a3619edc3702 upstream. Since at least kernel 6.1, flush_dcache_page() is called with IRQs disabled, e.g. from aio_complete(). But the current implementation for flush_dcache_page() on parisc unintentionally re-enables IRQs, which may lead to deadlocks. Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the flush_dcache_mmap_*lock() macros instead. Cc: linux-parisc@vger.kernel.org Cc: stable@kernel.org # 5.18+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman