kernel/linux.git/arch, branch v5.5.10

x86/mce/therm_throt: Undo thermal polling properly on CPU offline

2020-03-18T06:19:16+00:00

commit d364847eed890211444ad74496bb549f838c6018 upstream. Chris Wilson reported splats from running the thermal throttling workqueue callback on offlined CPUs. The problem is that that callback should not even run on offlined CPUs but it happens nevertheless because the offlining callback thermal_throttle_offline() does not symmetrically undo the setup work done in its onlining counterpart. IOW, 1. The thermal interrupt vector should be masked out before ... 2. ... cancelling any pending work synchronously so that no new work is enqueued anymore. Do those things and fix the issue properly. [ bp: Write commit message. ] Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle") Reported-by: Chris Wilson Tested-by: Pandruvada, Srinivas Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/158120068234.18291.7938335950259651295@skylake-alporthouse-com Signed-off-by: Greg Kroah-Hartman

x86/mce: Fix logic and comments around MSR_PPIN_CTL

2020-03-18T06:19:14+00:00

commit 59b5809655bdafb0767d3fd00a3e41711aab07e6 upstream. There are two implemented bits in the PPIN_CTL MSR: Bit 0: LockOut (R/WO) Set 1 to prevent further writes to MSR_PPIN_CTL. Bit 1: Enable_PPIN (R/W) If 1, enables MSR_PPIN to be accessible using RDMSR. If 0, an attempt to read MSR_PPIN will cause #GP. So there are four defined values: 0: PPIN is disabled, PPIN_CTL may be updated 1: PPIN is disabled. PPIN_CTL is locked against updates 2: PPIN is enabled. PPIN_CTL may be updated 3: PPIN is enabled. PPIN_CTL is locked against updates Code would only enable the X86_FEATURE_INTEL_PPIN feature for case "2". When it should have done so for both case "2" and case "3". Fix the final test to just check for the enable bit. Also fix some of the other comments in this function. Fixes: 3f5a7896a509 ("x86/mce: Include the PPIN in MCE records when available") Signed-off-by: Tony Luck Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20200226011737.9958-1-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman

perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag

2020-03-18T06:19:14+00:00

commit f967140dfb7442e2db0868b03b961f9c59418a1b upstream. Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by: Kim Phillips Signed-off-by: Borislav Petkov Acked-by: Peter Zijlstra Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com Signed-off-by: Greg Kroah-Hartman

x86/ioremap: Map EFI runtime services data as encrypted for SEV

2020-03-18T06:19:13+00:00

commit 985e537a4082b4635754a57f4f95430790afee6a upstream. The dmidecode program fails to properly decode the SMBIOS data supplied by OVMF/UEFI when running in an SEV guest. The SMBIOS area, under SEV, is encrypted and resides in reserved memory that is marked as EFI runtime services data. As a result, when memremap() is attempted for the SMBIOS data, it can't be mapped as regular RAM (through try_ram_remap()) and, since the address isn't part of the iomem resources list, it isn't mapped encrypted through the fallback ioremap(). Add a new __ioremap_check_other() to deal with memory types like EFI_RUNTIME_SERVICES_DATA which are not covered by the resource ranges. This allows any runtime services data which has been created encrypted, to be mapped encrypted too. [ bp: Move functionality to a separate function. ] Signed-off-by: Tom Lendacky Signed-off-by: Borislav Petkov Reviewed-by: Joerg Roedel Tested-by: Joerg Roedel Cc: # 5.3 Link: https://lkml.kernel.org/r/2d9e16eb5b53dc82665c95c6764b7407719df7a0.1582645327.git.thomas.lendacky@amd.com Signed-off-by: Greg Kroah-Hartman

MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling

2020-03-18T06:19:12+00:00

commit 8e029eb0bcd6a7fab6dc9191152c085784c31ee6 upstream. The CONFIG_MIPS_CMDLINE_DTB_EXTEND option is used so that the kernel arguments provided in the 'bootargs' property in devicetree are extended with the kernel arguments provided by the bootloader. The code was broken, as it didn't actually take any of the kernel arguments provided in devicetree when that option was set. Fixes: 7784cac69735 ("MIPS: cmdline: Clean up boot_command_line initialization") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: DTS: CI20: fix interrupt for pcf8563 RTC

2020-03-18T06:19:11+00:00

commit 130ab8819d81bd96f1a71e8461a8f73edf1fbe82 upstream. Interrupts should not be specified by interrupt line but by gpio parent and reference. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Reviewed-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: DTS: CI20: fix PMU definitions for ACT8600

2020-03-18T06:19:11+00:00

commit e8d87a0b822d4b3d9a94a5da915f93aa1b674c93 upstream. There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state. Fix DT to match the latest act8865-regulator bindings. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Reviewed-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

ARC: define __ALIGN_STR and __ALIGN symbols for ARC

2020-03-18T06:19:11+00:00

commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream. The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs

2020-03-18T06:19:11+00:00

commit 95fa10103dabc38be5de8efdfced5e67576ed896 upstream. When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter with EVMCS GPA = 0 the host crashes because the evmcs_gpa != vmx->nested.hv_evmcs_vmptr condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will happen on vmx->nested.hv_evmcs pointer dereference. Another problematic EVMCS ptr value is '-1' but it only causes host crash after nested_release_evmcs() invocation. The problem is exactly the same as with '0', we mistakenly think that the EVMCS pointer hasn't changed and thus nested.hv_evmcs_vmptr is valid. Resolve the issue by adding an additional !vmx->nested.hv_evmcs check to nested_vmx_handle_enlightened_vmptrld(), this way we will always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL and this is supposed to catch all invalid EVMCS GPAs. Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs() to be consistent with initialization where we don't currently set hv_evmcs_vmptr to '-1'. Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

KVM: x86: clear stale x86_emulate_ctxt->intercept value

2020-03-18T06:19:11+00:00

commit 342993f96ab24d5864ab1216f46c0b199c2baf8e upstream. After commit 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Hyper-V guests on KVM stopped booting with: kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181 info2 0 int_info 0 int_info_err 0 kvm_page_fault: address febd0000 error_code 181 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL kvm_inj_exception: #UD (0x0) "f3 a5" is a "rep movsw" instruction, which should not be intercepted at all. Commit c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") reduced the number of fields cleared by init_decode_cache() claiming that they are being cleared elsewhere, 'intercept', however, is left uncleared if the instruction does not have any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm, NearBranch, No16 and of course Intercept itself). Fixes: c44b4c6ab80e ("KVM: emulate: clean up initializations in init_decode_cache") Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: stable@vger.kernel.org Suggested-by: Paolo Bonzini Signed-off-by: Vitaly Kuznetsov Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman