kernel/linux.git/arch, branch v5.10.9

riscv: Trace irq on only interrupt is enabled

2021-01-19T17:27:33+00:00

commit 7cd1af107a92eb63b93a96dc07406dcbc5269436 upstream. We should call irq trace only if interrupt is going to be enabled during excecption handling. Otherwise, it results in following warning during boot with lock debugging enabled. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] DEBUG_LOCKS_WARN_ON(early_boot_irqs_disabled) [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:4085 lockdep_hardirqs_on_prepare+0x22a/0x22e [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #548 [ 0.000000] epc: c005d5d4 ra : c005d5d4 sp : c1c01e80 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : 00000000 [ 0.000000] t1 : ffffffff t2 : 00000000 s0 : c1c01ea0 [ 0.000000] s1 : c100f360 a0 : 0000002d a1 : c00666ee [ 0.000000] a2 : 00000000 a3 : 00000000 a4 : 00000000 [ 0.000000] a5 : 00000000 a6 : c1c6b390 a7 : 3ffff00e [ 0.000000] s2 : c2384fe8 s3 : 00000000 s4 : 00000001 [ 0.000000] s5 : c1c0a980 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : 00000000 t4 : 00000000 [ 0.000000] t5 : 00000001 t6 : 00000000 Fixes: 3c4697982982 ("riscv:Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Signed-off-by: Atish Patra Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman

x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling

2021-01-19T17:27:28+00:00

[ Upstream commit a8f7e08a81708920a928664a865208fdf451c49f ] The IN and OUT instructions with port address as an immediate operand only use an 8-bit immediate (imm8). The current VC handler uses the entire 32-bit immediate value but these instructions only set the first bytes. Cast the operand to an u8 for that. [ bp: Massage commit message. ] Fixes: 25189d08e5168 ("x86/sev-es: Add support for handling IOIO exceptions") Signed-off-by: Peter Gonda Signed-off-by: Borislav Petkov Acked-by: David Rientjes Link: https://lkml.kernel.org/r/20210105163311.221490-1-pgonda@google.com Signed-off-by: Sasha Levin

ARM: picoxcell: fix missing interrupt-parent properties

2021-01-19T17:27:27+00:00

[ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ] dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

arch/arc: add copy_user_page() to to fix build error on ARC

2021-01-19T17:27:26+00:00

[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ] fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in . ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams #Acked-by: Vineet Gupta # v1 Cc: Andrew Morton Cc: Matthew Wilcox Cc: Jan Kara Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny # v2 Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

ARM: dts: ux500/golden: Set display max brightness

2021-01-19T17:27:24+00:00

[ Upstream commit 7887cc89d5851cbdec49219e9614beec776af150 ] A too high brightness by default (default is max) makes the screen go blank. Set this to 15 as in the Vendor tree. Signed-off-by: Linus Walleij Cc: Stephan Gerhold Link: https://lore.kernel.org/r/20201214223413.253893-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875

2021-01-19T17:27:23+00:00

[ Upstream commit c0bc969c176b10598b31d5d1a5edf9a5261f0a9f ] xt875 comes up with a iva voltage of 1375000 and android runs at this too. fix maximum voltage to be consistent with this. Signed-off-by: Carl Philipp Klemm Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARC: build: move symlink creation to arch/arc/Makefile to avoid race

2021-01-19T17:27:23+00:00

[ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ] If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

ARC: build: add boot_targets to PHONY

2021-01-19T17:27:23+00:00

[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ] The top-level boot_targets (uImage and uImage.*) should be phony targets. They just let Kbuild descend into arch/arc/boot/ and create files there. If a file exists in the top directory with the same name, the boot image will not be created. You can confirm it by the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig all # vmlinux will be built $ touch uImage.gz $ make ARCH=arc uImage.gz CALL scripts/atomic/check-atomics.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h # arch/arc/boot/uImage.gz is not created Specify the targets as PHONY to fix this. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

ARC: build: add uImage.lzma to the top-level target

2021-01-19T17:27:23+00:00

[ Upstream commit f2712ec76a5433e5ec9def2bd52a95df1f96d050 ] arch/arc/boot/Makefile supports uImage.lzma, but you cannot do 'make uImage.lzma' because the corresponding target is missing in arch/arc/Makefile. Add it. I also changed the assignment operator '+=' to ':=' since this is the only place where we expect this variable to be set. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

2021-01-19T17:27:23+00:00

[ Upstream commit 9836720911cfec25d3fbdead1c438bf87e0f2841 ] The deb-pkg builds for ARCH=arc fail. $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make ARCH=arc bindeb-pkg SORTTAB vmlinux SYSMAP System.map MODPOST Module.symvers make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg sh ./scripts/package/builddeb cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1 make[3]: *** [Makefile:1527: intdeb-pkg] Error 2 make[2]: *** [debian/rules:13: binary-arch] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2 make: *** [Makefile:1527: bindeb-pkg] Error 2 The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as the default image, but there is no rule to build it. Remove the meaningless KBUILD_IMAGE assignment so it will fallback to the default vmlinux. With this change, you can build the deb package. I removed the 'bootpImage' target as well. At best, it provides 'make bootpImage' as an alias of 'make vmlinux', but I do not see much sense in doing so. Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin