kernel/linux.git/arch, branch v4.9.223

MIPS: perf: Remove incorrect odd/even counter handling for I6400

2020-05-10T08:28:03+00:00

commit f7a31b5e7874f77464a4eae0a8ba84b9ae0b3a54 upstream. All performance counters on I6400 (odd and even) are capable of counting any of the available events, so drop current logic of using the extra bit to determine which counter to use. Signed-off-by: Marcin Nowakowski Fixes: 4e88a8621301 ("MIPS: Add cases for CPU_I6400") Fixes: fd716fca10fc ("MIPS: perf: Fix I6400 event numbers") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15991/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

powerpc/pci/of: Parse unassigned resources

2020-05-10T08:28:00+00:00

commit dead1c845dbe97e0061dae2017eaf3bd8f8f06ee upstream. The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing which reads "assigned-addresses" of every PCI device and initializes the device resources. However if the property is missing or zero sized, then there is no fallback of any kind and the PCI resources remain undiscovered, i.e. pdev->resource[] array remains empty. This adds a fallback which parses the "reg" property in pretty much same way except it marks resources as "unset" which later make Linux assign those resources proper addresses. This has an effect when: 1. a hypervisor failed to assign any resource for a device; 2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try assigning a resource. Neither is likely to happen under PowerVM. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B

2020-05-02T15:23:16+00:00

[ Upstream commit aee194b14dd2b2bde6252b3acf57d36dccfc743a ] This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT") Signed-off-by: Xi Wang Signed-off-by: Luke Nelson Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com Signed-off-by: Sasha Levin

ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y

2020-05-02T15:23:13+00:00

commit f1baca8896ae18e12c45552a4c4ae2086aa7e02c upstream. 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by: Clemens Gruber Signed-off-by: Ahmad Fatoum Tested-by: Roland Hieber Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

KVM: VMX: Enable machine check support for 32bit targets

2020-05-02T15:23:12+00:00

commit fb56baae5ea509e63c2a068d66a4d8ea91969fca upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini Cc: Sean Christopherson Cc: stable@vger.kernel.org Fixes: a0861c02a981 ("KVM: Add VT-x machine check support") Signed-off-by: Uros Bizjak Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

x86/vdso: Fix lsl operand order

2020-04-24T05:59:16+00:00

commit e78e5a91456fcecaa2efbb3706572fe043766f4d upstream. In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Samuel Neves Signed-off-by: Thomas Gleixner Acked-by: Andy Lutomirski Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

x86/microcode/intel: replace sync_core() with native_cpuid_reg(eax)

2020-04-24T05:59:16+00:00

On Intel it is required to do CPUID(1) before reading the microcode revision MSR. Current code in 4.4 an 4.9 relies on sync_core() to call CPUID, unfortunately on 32 bit machines code inside sync_core() always jumps past CPUID instruction as it depends on data structure boot_cpu_data witch are not populated correctly so early in boot sequence. It depends on: commit 5dedade6dfa2 ("x86/CPU: Add native CPUID variants returning a single datum") This patch is for 4.4 but also should apply to 4.9 Signed-off-by: Evalds Iodzevics Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

x86/CPU: Add native CPUID variants returning a single datum

2020-04-24T05:59:15+00:00

commit 5dedade6dfa243c130b85d1e4daba6f027805033 upstream. ... similarly to the cpuid_() variants. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/20170109114147.5082-2-bp@alien8.de Signed-off-by: Thomas Gleixner Cc: Evalds Iodzevics Signed-off-by: Greg Kroah-Hartman

KVM: s390: vsie: Fix possible race when shadowing region 3 tables

2020-04-24T05:59:13+00:00

[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ] We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger Signed-off-by: Sasha Levin

powerpc/maple: Fix declaration made after definition

2020-04-24T05:59:12+00:00

[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ] When building ppc64 defconfig, Clang errors (trimmed for brevity): arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^ machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning. To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc. While we're here, remove some spaces before tabs. Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers Suggested-by: Ilie Halip Signed-off-by: Nathan Chancellor Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin