kernel/linux.git/arch, branch v4.9.134

x86/kvm/lapic: always disable MMIO interface in x2APIC mode

2018-10-18T07:13:20+00:00

[ Upstream commit d1766202779e81d0f2a94c4650a6ba31497d369d ] When VMX is used with flexpriority disabled (because of no support or if disabled with module parameter) MMIO interface to lAPIC is still available in x2APIC mode while it shouldn't be (kvm-unit-tests): PASS: apic_disable: Local apic enabled in x2APIC mode PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set FAIL: apic_disable: *0xfee00030: 50014 The issue appears because we basically do nothing while switching to x2APIC mode when APIC access page is not used. apic_mmio_{read,write} only check if lAPIC is disabled before proceeding to actual write. When APIC access is virtualized we correctly manipulate with VMX controls in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes in x2APIC mode so there's no issue. Disabling MMIO interface seems to be easy. The question is: what do we do with these reads and writes? If we add apic_x2apic_mode() check to apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will go to userspace. When lAPIC is in kernel, Qemu uses this interface to inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This somehow works with disabled lAPIC but when we're in xAPIC mode we will get a real injected MSI from every write to lAPIC. Not good. The simplest solution seems to be to just ignore writes to the region and return ~0 for all reads when we're in x2APIC mode. This is what this patch does. However, this approach is inconsistent with what currently happens when flexpriority is enabled: we allocate APIC access page and create KVM memory region so in x2APIC modes all reads and writes go to this pre-allocated page which is, btw, the same for all vCPUs. Signed-off-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: add new compatibility string for macb on sama5d3

2018-10-18T07:13:20+00:00

[ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ] We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

x86/fpu: Finish excising 'eagerfpu'

2018-10-13T07:18:59+00:00

commit e63650840e8b053aa09ad934877e87e9941ed135 upstream. Now that eagerfpu= is gone, remove it from the docs and some comments. Also sync the changes to tools/. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Rik van Riel Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/cf430dd4481d41280e93ac6cf0def1007a67fc8e.1476740397.git.luto@kernel.org Signed-off-by: Ingo Molnar Cc: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman

x86/fpu: Remove struct fpu::counter

2018-10-13T07:18:58+00:00

commit 3913cc3507575273beb165a5e027a081913ed507 upstream. With the lazy FPU code gone, we no longer use the counter field in struct fpu for anything. Get rid it. Signed-off-by: Rik van Riel Reviewed-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Thomas Gleixner Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-6-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar Cc: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman

x86/fpu: Remove use_eager_fpu()

2018-10-13T07:18:58+00:00

commit c592b57347069abfc0dcad3b3a302cf882602597 upstream. This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all. Signed-off-by: Andy Lutomirski Signed-off-by: Rik van Riel Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Thomas Gleixner Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman

x86/mm: Expand static page table for fixmap space

2018-10-13T07:18:57+00:00

commit 05ab1d8a4b36ee912b7087c6da127439ed0a903e upstream. We met a kernel panic when enabling earlycon, which is due to the fixmap address of earlycon is not statically setup. Currently the static fixmap setup in head_64.S only covers 2M virtual address space, while it actually could be in 4M space with different kernel configurations, e.g. when VSYSCALL emulation is disabled. So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2, and add a build time check to ensure that the fixmap is covered by the initial static page tables. Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable") Suggested-by: Thomas Gleixner Signed-off-by: Feng Tang Signed-off-by: Thomas Gleixner Tested-by: kernel test robot Reviewed-by: Juergen Gross (Xen parts) Cc: H Peter Anvin Cc: Peter Zijlstra Cc: Michal Hocko Cc: Yinghai Lu Cc: Dave Hansen Cc: Andi Kleen Cc: Andy Lutomirsky Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com Signed-off-by: Greg Kroah-Hartman

ARC: clone syscall to setp r25 as thread pointer

2018-10-13T07:18:57+00:00

commit c58a584f05e35d1d4342923cd7aac07d9c3d3d16 upstream. Per ARC TLS ABI, r25 is designated TP (thread pointer register). However so far kernel didn't do any special treatment, like setting up usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime to do this, in say clone libc wrapper [1]. This was deliberate to keep kernel ABI agnostic (userspace could potentially change TP, specially for different ARC ISA say ARCompact vs. ARCv2 with different spare registers etc) However userspace setting up r25, after clone syscall opens a race, if child is not scheduled and gets a signal instead. It starts off in userspace not in clone but in a signal handler and anything TP sepcific there such as pthread_self() fails which showed up with uClibc testsuite nptl/tst-kill6 [2] Fix this by having kernel populate r25 to TP value. So this locks in ABI, but it was not going to change anyways, and fwiw is same for both ARCompact (arc700 core) and ARCvs (HS3x cores) [1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S [2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c Fixes: ARC STAR 9001378481 Cc: stable@vger.kernel.org Reported-by: Nikita Sobolev Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

powerpc/fadump: Return error when fadump registration fails

2018-10-13T07:18:57+00:00

commit 98b8cd7f75643e0a442d7a4c1cef2c9d53b7e92b upstream. - log an error message when registration fails and no error code listed in the switch is returned - translate the hv error code to posix error code and return it from fw_register - return the posix error code from fw_register to the process writing to sysfs - return EEXIST on re-registration - return success on deregistration when fadump is not registered - return ENODEV when no memory is reserved for fadump Signed-off-by: Michal Suchanek Tested-by: Hari Bathini [mpe: Use pr_err() to shrink the error print] Signed-off-by: Michael Ellerman Cc: Kleber Sacilotto de Souza Signed-off-by: Greg Kroah-Hartman

x86/vdso: Fix vDSO syscall fallback asm constraint regression

2018-10-13T07:18:54+00:00

commit 02e425668f5c9deb42787d10001a3b605993ad15 upstream. When I added the missing memory outputs, I failed to update the index of the first argument (ebx) on 32-bit builds, which broke the fallbacks. Somehow I must have screwed up my testing or gotten lucky. Add another test to cover gettimeofday() as well. Signed-off-by: Andy Lutomirski Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86/vdso: Fix asm constraints on vDSO syscall fallbacks

2018-10-13T07:18:54+00:00

commit 715bd9d12f84d8f5cc8ad21d888f9bc304a8eb0b upstream. The syscall fallbacks in the vDSO have incorrect asm constraints. They are not marked as writing to their outputs -- instead, they are marked as clobbering "memory", which is useless. In particular, gcc is smart enough to know that the timespec parameter hasn't escaped, so a memory clobber doesn't clobber it. And passing a pointer as an asm *input* does not tell gcc that the pointed-to value is changed. Add in the fact that the asm instructions weren't volatile, and gcc was free to omit them entirely unless their sole output (the return value) is used. Which it is (phew!), but that stops happening with some upcoming patches. As a trivial example, the following code: void test_fallback(struct timespec *ts) { vdso_fallback_gettime(CLOCK_MONOTONIC, ts); } compiles to: 00000000000000c0 : c0: c3 retq To add insult to injury, the RCX and R11 clobbers on 64-bit builds were missing. The "memory" clobber is also unnecessary -- no ordering with respect to other memory operations is needed, but that's going to be fixed in a separate not-for-stable patch. Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Signed-off-by: Andy Lutomirski Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman