kernel/linux.git/arch, branch v4.19.243

MIPS: Use address-of operator on section symbols

2022-05-15T17:41:57+00:00

commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream. When building xway_defconfig with clang: arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare] else if (__dtb_start != __dtb_end) ^ 1 error generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison. Link: https://github.com/ClangBuiltLinux/linux/issues/1232 Signed-off-by: Nathan Chancellor Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU

2022-05-12T10:20:25+00:00

[ Upstream commit 5a1bde46f98b893cda6122b00e94c0c40a6ead3c ] On some x86 processors, CPUID leaf 0xA provides information on Architectural Performance Monitoring features. It advertises a PMU version which Qemu uses to determine the availability of additional MSRs to manage the PMCs. Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for the same, the kernel constructs return values based on the x86_pmu_capability irrespective of the vendor. This leaf and the additional MSRs are not supported on AMD and Hygon processors. If AMD PerfMonV2 is detected, the PMU version is set to 2 and guest startup breaks because of an attempt to access a non-existent MSR. Return zeros to avoid this. Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde Signed-off-by: Sandipan Das Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

parisc: Merge model and model name into one line in /proc/cpuinfo

2022-05-12T10:20:23+00:00

commit 5b89966bc96a06f6ad65f64ae4b0461918fcc9d3 upstream. The Linux tool "lscpu" shows the double amount of CPUs if we have "model" and "model name" in two different lines in /proc/cpuinfo. This change combines the model and the model name into one line. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

MIPS: Fix CP0 counter erratum detection for R4k CPUs

2022-05-12T10:20:23+00:00

commit f0a6c68f69981214cb7858738dd2bc81475111f7 upstream. Fix the discrepancy between the two places we check for the CP0 counter erratum in along with the incorrect comparison of the R4400 revision number against 0x30 which matches none and consistently consider all R4000 and R4400 processors affected, as documented in processor errata publications[1][2][3], following the mapping between CP0 PRId register values and processor models: PRId | Processor Model ---------+-------------------- 00000422 | R4000 Revision 2.2 00000430 | R4000 Revision 3.0 00000440 | R4400 Revision 1.0 00000450 | R4400 Revision 2.0 00000460 | R4400 Revision 3.0 No other revision of either processor has ever been spotted. Contrary to what has been stated in commit ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the CP0 counter as buggy does not preclude it from being used as either a clock event or a clock source device. It just cannot be used as both at a time, because in that case clock event interrupts will be occasionally lost, and the use as a clock event device takes precedence. Compare against 0x4ff in `can_use_mips_counter' so that a single machine instruction is produced. References: [1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS Technologies Inc., May 10, 1994, Erratum 53, p.13 [2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies Inc., February 9, 1994, Erratum 21, p.4 [3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS Technologies Inc., January 24, 1995, Erratum 14, p.3 Signed-off-by: Maciej W. Rozycki Fixes: ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug") Cc: stable@vger.kernel.org # v2.6.24+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

x86/cpu: Load microcode during restore_processor_state()

2022-05-12T10:20:22+00:00

commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream. When resuming from system sleep state, restore_processor_state() restores the boot CPU MSRs. These MSRs could be emulated by microcode. If microcode is not loaded yet, writing to emulated MSRs leads to unchecked MSR access error: ... PM: Calling lapic_suspend+0x0/0x210 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr) Call Trace: ? restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kobj_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write __x64_sys_write do_syscall_64 entry_SYSCALL_64_after_hwframe RIP: 0033:0x7fda13c260a7 To ensure microcode emulated MSRs are available for restoration, load the microcode on the boot CPU before restoring these MSRs. [ Pawan: write commit message and productize it. ] Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") Reported-by: Kyle D. Pelton Signed-off-by: Borislav Petkov Signed-off-by: Pawan Gupta Tested-by: Kyle D. Pelton Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841 Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman

x86: __memcpy_flushcache: fix wrong alignment if size > 2^32

2022-05-12T10:20:22+00:00

[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ] The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

ARM: dts: imx6ull-colibri: fix vqmmc regulator

2022-05-12T10:20:21+00:00

[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ] The correct spelling for the property is gpios. Otherwise, the regulator will neither reserve nor control any GPIOs. Thus, any SD/MMC card which can use UHS-I modes will fail. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Max Krummenacher Signed-off-by: Denys Drozdov Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35

2022-05-12T10:20:21+00:00

[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ] The pinout of the OMAP35 and DM37 variants of the SOM-LV are the same, but the macros which define the pinmuxing are different between OMAP3530 and DM3730. The pinmuxing was correct for for the DM3730, but wrong for the OMAP3530. Since the boot loader was correctly pin-muxing the pins, this was not obvious. As the bootloader not guaranteed to pinmux all the pins any more, this causes an issue, so the pinmux needs to be moved from a common file to their respective board files. Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit") Signed-off-by: Adam Ford Message-Id: <20220303171818.11060-1-aford173@gmail.com> Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: dts: Fix mmc order for omap3-gta04

2022-05-12T10:20:20+00:00

[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ] Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") introduces general mmc aliases. Let's tailor them to the need of the GTA04 board which does not make use of mmc2 and mmc3 interfaces. Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") Signed-off-by: H. Nikolaus Schaller Message-Id: Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: OMAP2+: Fix refcount leak in omap_gic_of_init

2022-05-12T10:20:20+00:00

[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ] The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build") Signed-off-by: Miaoqian Lin Message-Id: <20220309104302.18398-1-linmq006@gmail.com> Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin