kernel/linux.git/arch, branch v4.14.38

s390/uprobes: implement arch_uretprobe_is_alive()

2018-04-29T09:33:18+00:00

commit 783c3b53b9506db3e05daacfe34e0287eebb09d8 upstream. Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs observed with uretprobes in combination with setjmp/longjmp. See commit 2dea1d9c38e4 ("powerpc/uprobes: Implement arch_uretprobe_is_alive()") for more details. With this implemented all test cases referenced in the above commit pass. Reported-by: Ziqian SUN Cc: # v4.3+ Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

arm64: dts: rockchip: remove vdd_log from rk3399-puma

2018-04-29T09:33:16+00:00

commit 87eba0716011e528f7841026f2cc65683219d0ad upstream. vdd_log has no consumer and therefore will not be set to a specific voltage. Still the PWM output pin gets configured and thence the vdd_log output voltage will changed from it's default. Depending on the idle state of the PWM this will slightly over or undervoltage the logic supply of the RK3399 and cause instability with GbE (undervoltage) and PCIe (overvoltage). Since the default value set by a voltage divider is the correct supply voltage and we don't need to change it during runtime we remove the rail from the devicetree completely so the PWM pin will not be configured. Signed-off-by: Klaus Goger Signed-off-by: Heiko Stuebner Cc: Jakob Unterwurzacher Signed-off-by: Greg Kroah-Hartman

microblaze: Setup dependencies for ASM optimized lib functions

2018-04-29T09:33:16+00:00

commit 18ffc0cce4ff947a2acc9b2e06ae5309a6e6fb43 upstream. The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52be3f86520524711a6f33f3866f9339694) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by: kbuild test robot Signed-off-by: Michal Simek Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

s390: correct module section names for expoline code revert

2018-04-29T09:33:16+00:00

[ Upstream commit 6cf09958f32b9667bb3ebadf74367c791112771b ] The main linker script vmlinux.lds.S for the kernel image merges the expoline code patch tables into two section ".nospec_call_table" and ".nospec_return_table". This is *not* done for the modules, there the sections retain their original names as generated by gcc: ".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg". The module_finalize code has to check for the compiler generated section names, otherwise no code patching is done. This slows down the module code in case of "spectre_v2=off". Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390: correct nospec auto detection init order

2018-04-29T09:33:16+00:00

[ Upstream commit 6a3d1e81a434fc311f224b8be77258bafc18ccc6 ] With CONFIG_EXPOLINE_AUTO=y the call of spectre_v2_auto_early() via early_initcall is done *after* the early_param functions. This overwrites any settings done with the nobp/no_spectre_v2/spectre_v2 parameters. The code patching for the kernel is done after the evaluation of the early parameters but before the early_initcall is done. The end result is a kernel image that is patched correctly but the kernel modules are not. Make sure that the nospec auto detection function is called before the early parameters are evaluated and before the code patching is done. Fixes: 6e179d64126b ("s390: add automatic detection of the spectre defense") Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390: add sysfs attributes for spectre

2018-04-29T09:33:15+00:00

[ Upstream commit d424986f1d6b16079b3231db0314923f4f8deed1 ] Set CONFIG_GENERIC_CPU_VULNERABILITIES and provide the two functions cpu_show_spectre_v1 and cpu_show_spectre_v2 to report the spectre mitigations. Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390: report spectre mitigation via syslog

2018-04-29T09:33:15+00:00

[ Upstream commit bc035599718412cfba9249aa713f90ef13f13ee9 ] Add a boot message if either of the spectre defenses is active. The message is "Spectre V2 mitigation: execute trampolines." or "Spectre V2 mitigation: limited branch prediction." Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390: add automatic detection of the spectre defense

2018-04-29T09:33:15+00:00

[ Upstream commit 6e179d64126b909f0b288fa63cdbf07c531e9b1d ] Automatically decide between nobp vs. expolines if the spectre_v2=auto kernel parameter is specified or CONFIG_EXPOLINE_AUTO=y is set. The decision made at boot time due to CONFIG_EXPOLINE_AUTO=y being set can be overruled with the nobp, nospec and spectre_v2 kernel parameters. Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390: move nobp parameter functions to nospec-branch.c

2018-04-29T09:33:15+00:00

[ Upstream commit b2e2f43a01bace1a25bdbae04c9f9846882b727a ] Keep the code for the nobp parameter handling with the code for expolines. Both are related to the spectre v2 mitigation. Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

s390/entry.S: fix spurious zeroing of r0

2018-04-29T09:33:15+00:00

[ Upstream commit d3f468963cd6fd6d2aa5e26aed8b24232096d0e1 ] when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by: Farhan Ali Fixes: 7041d28115e91 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman