kernel/linux.git/arch/xtensa, branch master

Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-04-15T21:41:21+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham P) - Enable AtomicOps only if we know the Root Port supports them (Gerd Bayer) - Don't enable AtomicOps for RCiEPs since none of them need Atomic Ops and we can't tell whether the Root Complex would support them (Gerd Bayer) - Leave Precision Time Measurement disabled until a driver enables it to avoid PCIe errors (Mika Westerberg) - Make pci_set_vga_state() fail if bridge doesn't support VGA routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return errors to vga_get() callers including userspace via /dev/vga_arbiter (Simon Richter) - Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3, rzg3s drivers (where the actual controller constraints are known), and remove validation from the generic OF DT accessor (Hans Zhang) - Remove pc110pad driver (no longer useful after 486 CPU support removed) and no_pci_devices() (pc110pad was the last user) (Dmitry Torokhov, Heiner Kallweit) Resource management: - Prevent assigning space to unimplemented bridge windows; previously we mistakenly assumed prefetchable window existed and assigned space and put a BAR there (Ahmed Naseef) - Avoid shrinking bridge windows to fit in the initial Root Port window; fixes one problem with devices with large BARs connected via switches, e.g., Thunderbolt (Ilpo Järvinen) - Pass full extent of empty space, not just the aligned space, to resource_alignf callback so free space before the requested alignment can be used (Ilpo Järvinen) - Place small resources before larger ones for better utilization of address space (Ilpo Järvinen) - Fix alignment calculation for resource size larger than align, e.g., bridge windows larger than the 1MB required alignment (Ilpo Järvinen) Reset: - Update slot handling so all ARI functions are treated as being in the same slot. They're all reset by Secondary Bus Reset, but previously drivers of ARI functions that appeared to be on a non-zero device weren't notified and fatal hardware errors could result (Keith Busch) - Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug events (Keith Busch) - Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by CXL because it has no effect (Vidya Sagar) - Avoid FLR for AMD NPU device, where it causes the device to hang (Lizhi Hou) Error handling: - Clear only error bits in PCIe Device Status to avoid accidentally clearing Emergency Power Reduction Detected (Shuai Xue) - Check for AER errors even in devices without drivers (Lukas Wunner) - Initialize ratelimit info so DPC and EDR paths log AER error information (Kuppuswamy Sathyanarayanan) Power control: - Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so generic pwrctrl driver can control it (Neil Armstrong) Hotplug: - Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core doesn't complain when setting brightness fails because the endpoint is gone (Richard Cheng) Peer-to-peer DMA: - Allow wildcards in list of host bridges that support peer-to-peer DMA between hierarchy domains and add all Google SoCs (Jacob Moroni) Endpoint framework: - Advertise dynamic inbound mapping support in pci-epf-test and update host pci_endpoint_test to skip doorbell testing if not advertised by endpoint (Koichiro Den) - Return 0, not remaining timeout, when MHI eDMA ops complete so mhi_ep_ring_add_element() doesn't interpret non-zero as failure (Daniel Hodges) - Remove vntb and ntb duplicate resource teardown that leads to oops when .allow_link() fails or .drop_link() is called (Koichiro Den) - Disable vntb delayed work before clearing BAR mappings and doorbells to avoid oops caused by doing the work after resources have been torn down (Koichiro Den) - Add a way to describe reserved subregions within BARs, e.g., platform-owned fixed register windows, and use it for the RK3588 BAR4 DMA ctrl window (Koichiro Den) - Add BAR_DISABLED for BARs that will never be available to an EPF driver, and change some BAR_RESERVED annotations to BAR_DISABLED (Niklas Cassel) - Add NTB .get_dma_dev() callback for cases where DMA API requires a different device, e.g., vNTB devices (Koichiro Den) - Add reserved region types for MSI-X Table and PBA so Endpoint controllers can them as describe hardware-owned regions in a BAR_RESERVED BAR (Manikanta Maddireddy) - Make Tegra194/234 BAR0 programmable and remove 1MB size limit (Manikanta Maddireddy) - Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED (Manikanta Maddireddy) - Add Tegra194 and Tegra234 device table entries to pci_endpoint_test (Manikanta Maddireddy) - Skip the BAR subrange selftest if there are not enough inbound window resources to run the test (Christian Bruel) New native PCIe controller drivers: - Add DT binding and driver for Andes QiLai SoC PCIe host controller (Randolph Lin) - Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang) Baikal T-1 PCIe controller driver: - Remove driver since it never quite became usable (Andy Shevchenko) Cadence PCIe controller driver: - Implement byte/word config reads with dword (32-bit) reads because some Cadence controllers don't support sub-dword accesses (Aksh Garg) CIX Sky1 PCIe controller driver: - Add 'power-domains' to DT binding for SCMI power domain (Gary Yang) Freescale i.MX6 PCIe controller driver: - Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard Zhu) - Delay instead of polling for L2/L3 Ready after PME_Turn_off when suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu) - Separate PERST# assertion (for resetting endpoints) from core reset (for resetting the RC itself) to prepare for new DTs with PERST# GPIO in per-Root Port nodes (Sherry Sun) - Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so MSI from downstream devices will work (Richard Zhu) - Fix i.MX95 reference clock source selection when internal refclk is used (Franz Schnyder) Freescale Layerscape PCIe controller driver: - Allow building as a removable module (Sascha Hauer) MediaTek PCIe Gen3 controller driver: - Use dev_err_probe() to simplify error paths and make deferred probe messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai) - Power off device if setup fails (Chen-Yu Tsai) - Integrate new pwrctrl API to enable power control for WiFi/BT adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai) NVIDIA Tegra194 PCIe controller driver: - Poll less aggressively and non-atomically for PME_TO_Ack during transition to L2 (Vidya Sagar) - Disable LTSSM after transition to Detect on surprise link down to stop toggling between Polling and Detect (Manikanta Maddireddy) - Don't force the device into the D0 state before L2 when suspending or shutting down the controller (Vidya Sagar) - Disable PERST# IRQ only in Endpoint mode because it's not registered in Root Port mode (Manikanta Maddireddy) - Handle 'nvidia,refclk-select' as optional (Vidya Sagar) - Disable direct speed change in Endpoint mode so link speed change is controlled by the host (Vidya Sagar) - Set LTR values before link up to avoid bogus LTR messages with 0 latency (Vidya Sagar) - Allow system suspend when the Endpoint link is down (Vidya Sagar) - Use DWC IP core version, not Tegra custom values, to avoid DWC core version check warnings (Manikanta Maddireddy) - Apply ECRC workaround to devices based on DesignWare 5.00a as well as 4.90a (Manikanta Maddireddy) - Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum (Vidya Sagar) - Delay post-PERST# cleanup until core is powered on to avoid CBB timeout (Manikanta Maddireddy) - Assert CLKREQ# so switches that forward it to their downstream side can bring up those links successfully (Vidya Sagar) - Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from any previous bad link state (Vidya Sagar) - Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA driver and Endpoint controller driver can share the interrupt line (Vidya Sagar) - Enable DMA interrupt to support DMA in both Root Port and Endpoint modes (Vidya Sagar) - Enable hardware link retraining after link goes down in Endpoint mode (Vidya Sagar) - Add DT binding and driver support for core clock monitoring (Vidya Sagar) Qualcomm PCIe controller driver: - Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since Qcom Root Ports support hotplug events like DL_Up/Down and can accept writes to Slot Control without delays between writes (Krishna Chaitanya Chundru) Renesas R-Car PCIe controller driver: - Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den) - Reduce EPC BAR alignment requirement to 4K (Koichiro Den) Renesas RZ/G3S PCIe controller driver: - Add RZ/G3E to DT binding and to driver (John Madieu) - Assert (not deassert) resets in probe error path (John Madieu) - Assert resets in suspend path in reverse order they were deasserted during probe (John Madieu) - Rework inbound window algorithm to prevent mapping more than intended region and enforce alignment on size, to prepare for RZ/G3E support (John Madieu) Rockchip DesignWare PCIe controller driver: - Add tracepoints for PCIe controller LTSSM transitions and link rate changes (Shawn Lin) - Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn Lin) SOPHGO PCIe controller driver: - Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that advertise support for them (Yao Zi) Synopsys DesignWare PCIe controller driver: - Continue with system suspend even if an Endpoint doesn't respond with PME_TO_Ack message (Manivannan Sadhasivam) - Set Endpoint MSI-X Table Size in the correct function of a multi-function device when configuring MSI-X, not in Function 0 (Aksh Garg) - Set Max Link Width and Max Link Speed for all functions of a multi-function device, not just Function 0 (Aksh Garg) - Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang) Miscellaneous: - Warn only once about invalid ACS kernel parameter format (Richard Cheng) - Suppress FW_BUG warning when writing sysfs 'numa_node' with the current value (Li RongQing) - Drop redundant 'depends on PCI' from Kconfig (Julian Braha)" * tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits) PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list PCI/P2PDMA: Allow wildcard Device IDs in host bridge list PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports PCI: tegra194: Add core monitor clock support dt-bindings: PCI: tegra194: Add monitor clock support PCI: tegra194: Enable hardware hot reset mode in Endpoint mode PCI: tegra194: Enable DMA interrupt PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode PCI: tegra194: Assert CLKREQ# explicitly by default PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on PCI: tegra194: Disable L1.2 capability of Tegra234 EP PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well PCI: tegra194: Use DWC IP core version PCI: tegra194: Free up Endpoint resources during remove() PCI: tegra194: Allow system suspend when the Endpoint link is not up PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode PCI: tegra194: Disable direct speed change for Endpoint mode PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" ...

mm: change to return bool for ptep_test_and_clear_young()

2026-04-05T20:53:35+00:00

Patch series "change young flag check functions to return bool", v2. This is a cleanup patchset to change all young flag check functions to return bool, as discussed with David in the previous thread[1]. Since callers only care about whether the young flag was set, returning bool makes the intention clearer. No functional changes intended. This patch (of 6): Callers use ptep_test_and_clear_young() to clear the young flag and check whether it was set. Change the return type to bool to make the intention clearer. Link: https://lkml.kernel.org/r/cover.1774075004.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/57e70efa9703d43959aa645246ea3cbdba14fa17.1774075004.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Lorenzo Stoakes (Oracle) Acked-by: David Hildenbrand (Arm) Cc: Liam Howlett Cc: Michal Hocko Cc: Mike Rapoport Cc: Suren Baghdasaryan Signed-off-by: Andrew Morton

arch, mm: consolidate empty_zero_page

2026-04-05T20:53:01+00:00

Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of ZERO_PAGE() to 4. Every architecture defines empty_zero_page that way or another, but for the most of them it is always a page aligned page in BSS and most definitions of ZERO_PAGE do virt_to_page(empty_zero_page). Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the core MM and drop these definitions in architectures that do not implement colored zero page (MIPS and s390). ZERO_PAGE() remains a macro because turning it to a wrapper for a static inline causes severe pain in header dependencies. For the most part the change is mechanical, with these being noteworthy: * alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot parameters. Switching to a generic empty_zero_page removes the aliasing and keeps ZERO_PGE for boot parameters only * arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of ZERO_PAGE() is kept intact. * m68k/parisc/um: allocated empty_zero_page from memblock, although they do not support zero page coloring and having it in BSS will work fine. * sparc64 can have empty_zero_page in BSS rather allocate it, but it can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE() but instead of allocating it, make mem_map_zero point to empty_zero_page. * sh: used empty_zero_page for boot parameters at the very early boot. Rename the parameters page to boot_params_page and let sh use the generic empty_zero_page. * hexagon: had an amusing comment about empty_zero_page /* A handy thing to have if one has the RAM. Declared in head.S */ that unfortunately had to go :) Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) Acked-by: Helge Deller [parisc] Tested-by: Helge Deller [parisc] Reviewed-by: Christophe Leroy (CS GROUP) Acked-by: Dave Hansen Acked-by: Catalin Marinas Acked-by: Magnus Lindholm [alpha] Acked-by: Dinh Nguyen [nios2] Acked-by: Andreas Larsson [sparc] Acked-by: David Hildenbrand (Arm) Acked-by: Liam R. Howlett Cc: "Borislav Petkov (AMD)" Cc: David S. Miller Cc: Geert Uytterhoeven Cc: Guo Ren Cc: Huacai Chen Cc: Ingo Molnar Cc: Johannes Berg Cc: John Paul Adrian Glaubitz Cc: Lorenzo Stoakes Cc: Madhavan Srinivasan Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Hocko Cc: Michal Simek Cc: Palmer Dabbelt Cc: Richard Weinberger Cc: Russell King Cc: Stafford Horne Cc: Suren Baghdasaryan Cc: Vineet Gupta Cc: Vlastimil Babka Cc: Will Deacon Signed-off-by: Andrew Morton

PCI: Align head space better

2026-03-27T15:19:08+00:00

When a bridge window contains big and small resource(s), the small resource(s) may not amount to the half of the size of the big resource which would allow calculate_head_align() to shrink the head alignment. This results in always placing the small resource(s) after the big resource. In general, it would be good to be able to place the small resource(s) before the big resource to achieve better utilization of the address space. In the cases where the large resource can only fit at the end of the window, it is even required. However, carrying the information over from pbus_size_mem() and calculate_head_align() to __pci_assign_resource() and pcibios_align_resource() is not easy with the current data structures. A somewhat hacky way to move the non-aligning tail part to the head is possible within pcibios_align_resource(). The free space between the start of the free space span and the aligned start address can be compared with the non-aligning remainder of the size. If the free space is larger than the remainder, placing the remainder before the start address is possible. This relocation should generally work, because PCI resources consist only power-of-2 atoms. Various arch requirements may still need to override the relocation, so the relocation is only applied selectively in such cases. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205 Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Xifer Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com

resource: Pass full extent of empty space to resource_alignf callback

2026-03-27T15:18:39+00:00

__find_resource_space() calculates the full extent of empty space but only passes the aligned space to resource_alignf callback. In some situations, the callback may choose take advantage of the free space before the requested alignment. Pass the full extent of the calculated empty space to resource_alignf callback as an additional parameter. Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Xifer Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge tag 'xtensa-20260219' of https://github.com/jcmvbkbc/linux-xtensa

2026-02-20T17:16:09+00:00

Pull Xtensa update from Max Filippov: - fix unhandled case in the load/store fault handler in configurations with MMU * tag 'xtensa-20260219' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: align: validate access in fast_load_store

Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-02-12T20:13:01+00:00

Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ...

Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-02-12T19:32:37+00:00

Pull MM updates from Andrew Morton: - "powerpc/64s: do not re-activate batched TLB flush" makes arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev) It adds a generic enter/leave layer and switches architectures to use it. Various hacks were removed in the process. - "zram: introduce compressed data writeback" implements data compression for zram writeback (Richard Chang and Sergey Senozhatsky) - "mm: folio_zero_user: clear page ranges" adds clearing of contiguous page ranges for hugepages. Large improvements during demand faulting are demonstrated (David Hildenbrand) - "memcg cleanups" tidies up some memcg code (Chen Ridong) - "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos stats" improves DAMOS stat's provided information, deterministic control, and readability (SeongJae Park) - "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few issues in the hugetlb cgroup charging selftests (Li Wang) - "Fix va_high_addr_switch.sh test failure - again" addresses several issues in the va_high_addr_switch test (Chunyu Hu) - "mm/damon/tests/core-kunit: extend existing test scenarios" improves the KUnit test coverage for DAMON (Shu Anzai) - "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN (Shivank Garg) - "arch, mm: consolidate hugetlb early reservation" reworks and consolidates a pile of straggly code related to reservation of hugetlb memory from bootmem and creation of CMA areas for hugetlb (Mike Rapoport) - "mm: clean up anon_vma implementation" cleans up the anon_vma implementation in various ways (Lorenzo Stoakes) - "tweaks for __alloc_pages_slowpath()" does a little streamlining of the page allocator's slowpath code (Vlastimil Babka) - "memcg: separate private and public ID namespaces" cleans up the memcg ID code and prevents the internal-only private IDs from being exposed to userspace (Shakeel Butt) - "mm: hugetlb: allocate frozen gigantic folio" cleans up the allocation of frozen folios and avoids some atomic refcount operations (Kefeng Wang) - "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement of memory betewwn the active and inactive LRUs and adds auto-tuning of the ratio-based quotas and of monitoring intervals (SeongJae Park) - "Support page table check on PowerPC" makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan) - "nodemask: align nodes_and{,not} with underlying bitmap ops" makes nodes_and() and nodes_andnot() propagate the return values from the underlying bit operations, enabling some cleanup in calling code (Yury Norov) - "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up some DAMON internal interfaces (SeongJae Park) - "mm/khugepaged: cleanups and scan limit fix" does some cleanup work in khupaged and fixes a scan limit accounting issue (Shivank Garg) - "mm: balloon infrastructure cleanups" goes to town on the balloon infrastructure and its page migration function. Mainly cleanups, also some locking simplification (David Hildenbrand) - "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds additional tracepoints to the page reclaim code (Jiayuan Chen) - "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is part of Marco's kernel-wide migration from the legacy workqueue APIs over to the preferred unbound workqueues (Marco Crivellari) - "Various mm kselftests improvements/fixes" provides various unrelated improvements/fixes for the mm kselftests (Kevin Brodsky) - "mm: accelerate gigantic folio allocation" greatly speeds up gigantic folio allocation, mainly by avoiding unnecessary work in pfn_range_valid_contig() (Kefeng Wang) - "selftests/damon: improve leak detection and wss estimation reliability" improves the reliability of two of the DAMON selftests (SeongJae Park) - "mm/damon: cleanup kdamond, damon_call(), damos filter and DAMON_MIN_REGION" does some cleanup work in the core DAMON code (SeongJae Park) - "Docs/mm/damon: update intro, modules, maintainer profile, and misc" performs maintenance work on the DAMON documentation (SeongJae Park) - "mm: add and use vma_assert_stabilised() helper" refactors and cleans up the core VMA code. The main aim here is to be able to use the mmap write lock's lockdep state to perform various assertions regarding the locking which the VMA code requires (Lorenzo Stoakes) - "mm, swap: swap table phase II: unify swapin use" removes some old swap code (swap cache bypassing and swap synchronization) which wasn't working very well. Various other cleanups and simplifications were made. The end result is a 20% speedup in one benchmark (Kairui Song) - "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM available on 64-bit alpha, loongarch, mips, parisc, and um. Various cleanups were performed along the way (Qi Zheng) * tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits) mm/memory: handle non-split locks correctly in zap_empty_pte_table() mm: move pte table reclaim code to memory.c mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config um: mm: enable MMU_GATHER_RCU_TABLE_FREE parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE mips: mm: enable MMU_GATHER_RCU_TABLE_FREE LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles zsmalloc: make common caches global mm: add SPDX id lines to some mm source files mm/zswap: use %pe to print error pointers mm/vmscan: use %pe to print error pointers mm/readahead: fix typo in comment mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file() mm: refactor vma_map_pages to use vm_insert_pages mm/damon: unify address range representation with damon_addr_range mm/cma: replace snprintf with strscpy in cma_new_area ...