kernel/linux.git/arch/xtensa/include/asm/page.h, branch linux-7.0.y

treewide: provide a generic clear_user_page() variant

2026-01-21T03:24:39+00:00

Patch series "mm: folio_zero_user: clear page ranges", v11. This series adds clearing of contiguous page ranges for hugepages. The series improves on the current discontiguous clearing approach in two ways: - clear pages in a contiguous fashion. - use batched clearing via clear_pages() wherever exposed. The first is useful because it allows us to make much better use of hardware prefetchers. The second, enables advertising the real extent to the processor. Where specific instructions support it (ex. string instructions on x86; "mops" on arm64 etc), a processor can optimize based on this because, instead of seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a larger unit being operated on. For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to a mode where they start eliding cacheline allocation. This is helpful not just because it results in higher bandwidth, but also because now the cache is not evicting useful cachelines and replacing them with zeroes. Demand faulting a 64GB region shows performance improvement: $ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5 baseline +series (GBps +- %stdev) (GBps +- %stdev) pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=* pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy [*] This improvement is because switching to sequential clearing allows the hardware prefetchers to do a much better job. [#] For pg-sz=1GB a large part of the improvement is because of the cacheline elision mentioned above. preempt=full|lazy improves upon that because, not needing explicit invocations of cond_resched() to ensure reasonable preemption latency, it can clear the full extent as a single unit. In comparison the maximum extent used for preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB). When provided the full extent the processor forgoes allocating cachelines on this path almost entirely. (The hope is that eventually, in the fullness of time, the lazy preemption model will be able to do the same job that none or voluntary models are used for, allowing us to do away with cond_resched().) Raghavendra also tested previous version of the series on AMD Genoa and sees similar improvement [1] with preempt=lazy. $ perf bench mem map -p $page-size -f populate -s 64GB -l 10 base patched change pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6% pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2% This patch (of 8): Let's drop all variants that effectively map to clear_page() and provide it in a generic variant instead. We'll use the macro clear_user_page to indicate whether an architecture provides it's own variant. Also, clear_user_page() is only called from the generic variant of clear_user_highpage(), so define it only if the architecture does not provide a clear_user_highpage(). And, for simplicity define it in linux/highmem.h. Note that for parisc, clear_page() and clear_user_page() map to clear_page_asm(), so we can just get rid of the custom clear_user_page() implementation. There is a clear_user_page_asm() function on parisc, that seems to be unused. Not sure what's up with that. Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com Signed-off-by: David Hildenbrand Co-developed-by: Ankur Arora Signed-off-by: Ankur Arora Cc: Andy Lutomirski Cc: Ankur Arora Cc: "Borislav Petkov (AMD)" Cc: Boris Ostrovsky Cc: David Hildenbrand Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Konrad Rzessutek Wilk Cc: Lance Yang Cc: "Liam R. Howlett" Cc: Li Zhe Cc: Lorenzo Stoakes Cc: Mateusz Guzik Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Mike Rapoport Cc: Peter Zijlstra Cc: Raghavendra K T Cc: Suren Baghdasaryan Cc: Thomas Gleixner Cc: Vlastimil Babka Signed-off-by: Andrew Morton

xtensa: Replace ASSEMBLY with ASSEMBLER in non-uapi headers

2025-06-06T08:03:35+00:00

While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is a completely mechanical patch (done with a simple "sed -i" statement). Cc: Chris Zankel Cc: Max Filippov Signed-off-by: Thomas Huth Message-Id: <20250314071013.1575167-40-thuth@redhat.com> Signed-off-by: Max Filippov

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08+00:00

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2024-11-20T23:13:02+00:00

Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ...

xtensa: remove the get_order() implementation

2024-11-11T18:56:27+00:00

As the get_order() implemented by xtensa supporting 'nsau' instruction seems be the same as the generic implementation in include/asm-generic/getorder.h when size is not a constant value as the generic implementation calling the fls*() is also utilizing the 'nsau' instruction for xtensa. So remove the get_order() implemented by xtensa, as using the generic implementation may enable the compiler to do the computing when size is a constant value instead of runtime computing and enable the using of get_order() in BUILD_BUG_ON() macro in next patch. CC: Andrew Morton CC: Linux-MM Signed-off-by: Yunsheng Lin Acked-by: Max Filippov Reviewed-by: Alexander Duyck Link: https://patch.msgid.link/20241028115343.3405838-6-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski

asm-generic: provide generic page_to_phys and phys_to_page implementations

2024-10-28T21:44:28+00:00

page_to_phys is duplicated by all architectures, and from some strange reason placed in where it doesn't fit at all. phys_to_page is only provided by a few architectures despite having a lot of open coded users. Provide generic versions in to make these helpers more easily usable. Note with this patch powerpc loses the CONFIG_DEBUG_VIRTUAL pfn_valid check. It will be added back in a generic version later. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann

vdso: Introduce vdso/page.h

2024-10-15T22:13:04+00:00

The VDSO implementation includes headers from outside of the vdso/ namespace. Introduce vdso/page.h to make sure that the generic library uses only the allowed namespace. Signed-off-by: Vincenzo Frascino Signed-off-by: Thomas Gleixner Reviewed-by: Arnd Bergmann Acked-by: Geert Uytterhoeven # m68k Link: https://lore.kernel.org/all/20241014151340.1639555-3-vincenzo.frascino@arm.com

arch: define CONFIG_PAGE_SIZE_*KB on all architectures

2024-03-06T18:29:09+00:00

Most architectures only support a single hardcoded page size. In order to ensure that each one of these sets the corresponding Kconfig symbols, change over the PAGE_SHIFT definition to the common one and allow only the hardware page size to be selected. Acked-by: Guo Ren Acked-by: Heiko Carstens Acked-by: Stafford Horne Acked-by: Johannes Berg Acked-by: Geert Uytterhoeven Reviewed-by: Thomas Gleixner Signed-off-by: Arnd Bergmann

mm, arch: add generic implementation of pfn_valid() for FLATMEM

2023-02-10T00:51:41+00:00

Every architecture that supports FLATMEM memory model defines its own version of pfn_valid() that essentially compares a pfn to max_mapnr. Use mips/powerpc version implemented as static inline as a generic implementation of pfn_valid() and drop its per-architecture definitions. [rppt@kernel.org: fix the generic pfn_valid()] Link: https://lkml.kernel.org/r/Y9lg7R1Yd931C+y5@kernel.org Link: https://lkml.kernel.org/r/20230129124235.209895-5-rppt@kernel.org Signed-off-by: Mike Rapoport (IBM) Acked-by: Arnd Bergmann Acked-by: Guo Ren [csky] Acked-by: Huacai Chen [LoongArch] Acked-by: Stafford Horne [OpenRISC] Acked-by: Michael Ellerman [powerpc] Reviewed-by: David Hildenbrand Tested-by: Conor Dooley Cc: Brian Cain Cc: "David S. Miller" Cc: Dinh Nguyen Cc: Geert Uytterhoeven Cc: Greg Ungerer Cc: Helge Deller Cc: Huacai Chen Cc: Matt Turner Cc: Max Filippov Cc: Michal Simek Cc: Palmer Dabbelt Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Thomas Bogendoerfer Cc: Vineet Gupta Cc: WANG Xuerui Cc: Yoshinori Sato Signed-off-by: Andrew Morton

arch, mm: remove stale mentions of DISCONIGMEM

2021-06-29T17:53:55+00:00

There are several places that mention DISCONIGMEM in comments or have stale code guarded by CONFIG_DISCONTIGMEM. Remove the dead code and update the comments. Link: https://lkml.kernel.org/r/20210608091316.3622-7-rppt@kernel.org Signed-off-by: Mike Rapoport Acked-by: Arnd Bergmann Reviewed-by: David Hildenbrand Cc: Geert Uytterhoeven Cc: Ivan Kokshaysky Cc: Jonathan Corbet Cc: Matt Turner Cc: Richard Henderson Cc: Vineet Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds