kernel/linux.git/arch/x86/include/uapi/asm, branch v6.1.168

x86/sev: Add SEV-SNP guest feature negotiation support

2023-02-01T07:34:50+00:00

commit 8c29f016540532582721cec1dbf6d144873433ba upstream. The hypervisor can enable various new features (SEV_FEATURES[1:63]) and start a SNP guest. Some of these features need guest side implementation. If any of these features are enabled without it, the behavior of the SNP guest will be undefined. It may fail booting in a non-obvious way making it difficult to debug. Instead of allowing the guest to continue and have it fail randomly later, detect this early and fail gracefully. The SEV_STATUS MSR indicates features which the hypervisor has enabled. While booting, SNP guests should ascertain that all the enabled features have guest side implementation. In case a feature is not implemented in the guest, the guest terminates booting with GHCB protocol Non-Automatic Exit(NAE) termination request event, see "SEV-ES Guest-Hypervisor Communication Block Standardization" document (currently at https://developer.amd.com/wp-content/resources/56421.pdf), section "Termination Request". Populate SW_EXITINFO2 with mask of unsupported features that the hypervisor can easily report to the user. More details in the AMD64 APM Vol 2, Section "SEV_STATUS MSR". [ bp: - Massage. - Move snp_check_features() call to C code. Note: the CC:stable@ aspect here is to be able to protect older, stable kernels when running on newer hypervisors. Or not "running" but fail reliably and in a well-defined manner instead of randomly. ] Fixes: cbd3d4f7c4e5 ("x86/sev: Check SEV-SNP features support") Signed-off-by: Nikunj A Dadhania Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Tom Lendacky Cc: Link: https://lore.kernel.org/r/20230118061943.534309-1-nikunj@amd.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-08-05T17:47:40+00:00

Pull x86 SGX updates from Dave Hansen: "A set of x86/sgx changes focused on implementing the "SGX2" features, plus a minor cleanup: - SGX2 ISA support which makes enclave memory management much more dynamic. For instance, enclaves can now change enclave page permissions on the fly. - Removal of an unused structure member" * tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/sgx: Drop 'page_index' from sgx_backing selftests/sgx: Page removal stress test selftests/sgx: Test reclaiming of untouched page selftests/sgx: Test invalid access to removed enclave page selftests/sgx: Test faulty enclave behavior selftests/sgx: Test complete changing of page type flow selftests/sgx: Introduce TCS initialization enclave operation selftests/sgx: Introduce dynamic entry point selftests/sgx: Test two different SGX2 EAUG flows selftests/sgx: Add test for TCS page permission changes selftests/sgx: Add test for EPCM permission changes Documentation/x86: Introduce enclave runtime management section x86/sgx: Free up EPC pages directly to support large page ranges x86/sgx: Support complete page removal x86/sgx: Support modifying SGX page type x86/sgx: Tighten accessible memory range after enclave initialization x86/sgx: Support adding of pages to an initialized enclave x86/sgx: Support restricting of enclave page permissions x86/sgx: Support VA page allocation without reclaiming x86/sgx: Export sgx_encl_page_alloc() ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2022-08-04T21:59:54+00:00

Pull kvm updates from Paolo Bonzini: "Quite a large pull request due to a selftest API overhaul and some patches that had come in too late for 5.19. ARM: - Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack - Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure - Disagregation of the vcpu flags in separate sets to better track their use model. - A fix for the GICv2-on-v3 selftest - A small set of cosmetic fixes RISC-V: - Track ISA extensions used by Guest using bitmap - Added system instruction emulation framework - Added CSR emulation framework - Added gfp_custom flag in struct kvm_mmu_memory_cache - Added G-stage ioremap() and iounmap() functions - Added support for Svpbmt inside Guest s390: - add an interface to provide a hypervisor dump for secure guests - improve selftests to use TAP interface - enable interpretive execution of zPCI instructions (for PCI passthrough) - First part of deferred teardown - CPU Topology - PV attestation - Minor fixes x86: - Permit guests to ignore single-bit ECC errors - Intel IPI virtualization - Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS - PEBS virtualization - Simplify PMU emulation by just using PERF_TYPE_RAW events - More accurate event reinjection on SVM (avoid retrying instructions) - Allow getting/setting the state of the speaker port data bit - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent - "Notify" VM exit (detect microarchitectural hangs) for Intel - Use try_cmpxchg64 instead of cmpxchg64 - Ignore benign host accesses to PMU MSRs when PMU is disabled - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior - Allow NX huge page mitigation to be disabled on a per-vm basis - Port eager page splitting to shadow MMU as well - Enable CMCI capability by default and handle injected UCNA errors - Expose pid of vcpu threads in debugfs - x2AVIC support for AMD - cleanup PIO emulation - Fixes for LLDT/LTR emulation - Don't require refcounted "struct page" to create huge SPTEs - Miscellaneous cleanups: - MCE MSR emulation - Use separate namespaces for guest PTEs and shadow PTEs bitmasks - PIO emulation - Reorganize rmap API, mostly around rmap destruction - Do not workaround very old KVM bugs for L0 that runs with nesting enabled - new selftests API for CPUID Generic: - Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache - new selftests API using struct kvm_vcpu instead of a (vm, id) tuple" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits) selftests: kvm: set rax before vmcall selftests: KVM: Add exponent check for boolean stats selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test selftests: KVM: Check stat name before other fields KVM: x86/mmu: remove unused variable RISC-V: KVM: Add support for Svpbmt inside Guest/VM RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap() RISC-V: KVM: Add G-stage ioremap() and iounmap() functions KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache RISC-V: KVM: Add extensible CSR emulation framework RISC-V: KVM: Add extensible system instruction emulation framework RISC-V: KVM: Factor-out instruction emulation into separate sources RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function RISC-V: KVM: Fix variable spelling mistake RISC-V: KVM: Improve ISA extension by using a bitmap KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs() KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT KVM: x86: Do not block APIC write for non ICR registers ...

Merge tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

2022-08-03T02:50:47+00:00

Pull uapi flexible array update from Gustavo Silva: "A treewide patch that replaces zero-length arrays with flexible-array members in UAPI. This has been baking in linux-next for 5 weeks now. '-fstrict-flex-arrays=3' is coming and we need to land these changes to prevent issues like these in the short future: fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source] strcpy(de3->name, "."); ^ Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If this breaks anything, we can use a union with a new member name" Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 * tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: uapi: Replace zero-length arrays with flexible-array members

Merge remote-tracking branch 'kvm/next' into kvm-next-5.20

2022-08-01T07:21:00+00:00

KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID

KVM: x86: Tweak name of MONITOR/MWAIT #UD quirk to make it #UD specific

2022-07-14T01:14:05+00:00

Add a "UD" clause to KVM_X86_QUIRK_MWAIT_NEVER_FAULTS to make it clear that the quirk only controls the #UD behavior of MONITOR/MWAIT. KVM doesn't currently enforce fault checks when MONITOR/MWAIT are supported, but that could change in the future. SVM also has a virtualization hole in that it checks all faults before intercepts, and so "never faults" is already a lie when running on SVM. Fixes: bfbcc81bb82c ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior") Signed-off-by: Sean Christopherson Link: https://lore.kernel.org/r/20220711225753.1073989-4-seanjc@google.com

x86/setup: Use rng seeds from setup_data

2022-07-11T07:59:31+00:00

Currently, the only way x86 can get an early boot RNG seed is via EFI, which is generally always used now for physical machines, but is very rarely used in VMs, especially VMs that are optimized for starting "instantaneously", such as Firecracker's MicroVM. For tiny fast booting VMs, EFI is not something you generally need or want. Rather, the image loader or firmware should be able to pass a single random seed, exactly as device tree platforms do with the "rng-seed" property. Additionally, this is something that bootloaders can append, with their own seed file management, which is something every other major OS ecosystem has that Linux does not (yet). Add SETUP_RNG_SEED, similar to the other eight setup_data entries that are parsed at boot. It also takes care to zero out the seed immediately after using, in order to retain forward secrecy. This all takes about 7 trivial lines of code. Then, on kexec_file_load(), a new fresh seed is generated and passed to the next kernel, just as is done on device tree architectures when using kexec. And, importantly, I've tested that QEMU is able to properly pass SETUP_RNG_SEED as well, making this work for every step of the way. This code too is pretty straight forward. Together these measures ensure that VMs and nested kexec()'d kernels always receive a proper boot time RNG seed at the earliest possible stage from their parents: - Host [already has strongly initialized RNG] - QEMU [passes fresh seed in SETUP_RNG_SEED field] - Linux [uses parent's seed and gathers entropy of its own] - kexec [passes this in SETUP_RNG_SEED field] - Linux [uses parent's seed and gathers entropy of its own] - kexec [passes this in SETUP_RNG_SEED field] - Linux [uses parent's seed and gathers entropy of its own] - kexec [passes this in SETUP_RNG_SEED field] - ... I've verified in several scenarios that this works quite well from a host kernel to QEMU and down inwards, mixing and matching loaders, with every layer providing a seed to the next. [ bp: Massage commit message. ] Signed-off-by: Jason A. Donenfeld Signed-off-by: Borislav Petkov Acked-by: H. Peter Anvin (Intel) Link: https://lore.kernel.org/r/20220630113300.1892799-1-Jason@zx2c4.com

Merge tag 'v5.19-rc6' into tip:x86/kdump

2022-07-11T07:58:01+00:00

Merge rc6 to pick up dependent changes to the bootparam UAPI header. Signed-off-by: Borislav Petkov

x86/boot: Fix the setup data types max limit

2022-07-10T09:17:40+00:00

Commit in Fixes forgot to change the SETUP_TYPE_MAX definition which contains the highest valid setup data type. Correct that. Fixes: 5ea98e01ab52 ("x86/boot: Add Confidential Computing type to setup_data") Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/r/ddba81dd-cc92-699c-5274-785396a17fb5@zytor.com

x86/sgx: Support complete page removal

2022-07-07T17:13:03+00:00

The SGX2 page removal flow was introduced in previous patch and is as follows: 1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM using the ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES introduced in previous patch. 2) Approve the page removal by running ENCLU[EACCEPT] from within the enclave. 3) Initiate actual page removal using the ioctl() SGX_IOC_ENCLAVE_REMOVE_PAGES introduced here. Support the final step of the SGX2 page removal flow with ioctl() SGX_IOC_ENCLAVE_REMOVE_PAGES. With this ioctl() the user specifies a page range that should be removed. All pages in the provided range should have the SGX_PAGE_TYPE_TRIM page type and the request will fail with EPERM (Operation not permitted) if a page that does not have the correct type is encountered. Page removal can fail on any page within the provided range. Support partial success by returning the number of pages that were successfully removed. Since actual page removal will succeed even if ENCLU[EACCEPT] was not run from within the enclave the ENCLU[EMODPR] instruction with RWX permissions is used as a no-op mechanism to ensure ENCLU[EACCEPT] was successfully run from within the enclave before the enclave page is removed. If the user omits running SGX_IOC_ENCLAVE_REMOVE_PAGES the pages will still be removed when the enclave is unloaded. Signed-off-by: Reinette Chatre Signed-off-by: Dave Hansen Reviewed-by: Jarkko Sakkinen Tested-by: Haitao Huang Tested-by: Vijay Dhanraj Tested-by: Jarkko Sakkinen Link: https://lkml.kernel.org/r/b75ee93e96774e38bb44a24b8e9bbfb67b08b51b.1652137848.git.reinette.chatre@intel.com