kernel/linux.git/arch/um/include/asm/Kbuild, branch linux-5.9.y

um: Implement ndelay/udelay in time-travel mode

2020-03-29T21:29:52+00:00

In external or inf-cpu time-travel mode, ndelay/udelay currently just waste CPU time since the simulation time doesn't advance. Implement them properly in this case. Note that the "if (time_travel_mode == ...)" parts compile out if CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, time_travel_mode is defined to TT_MODE_OFF in that case. Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

um: Fix time-travel=inf-cpu with xor/raid6

2020-01-19T21:42:06+00:00

Today, I erroneously built a time-travel configuration with btrfs enabled, and noticed it cannot boot in time-travel=inf-cpu mode, both xor and raid6 speed measurement gets stuck. For xor, work around it by picking the first algorithm if inf-cpu mode is enabled. For raid6, I didn't find such a workaround, so disallow enabling time-travel mode if RAID6_PQ_BENCHMARK is enabled. With this, and RAID6_PQ_BENCHMARK disabled, I can boot a kernel that has btrfs enabled in time-travel=inf-cpu mode. Signed-off-by: Johannes Berg Acked-by: Anton Ivanov Signed-off-by: Richard Weinberger

um: Don't use generic barrier.h

2019-09-15T19:37:14+00:00

UML has its own platform-specific barrier.h under arch/x86/um/, which should get used. Fix the build system to use it, and then fix the barrier.h to actually compile. Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

treewide: Add SPDX license identifier - Kbuild

2019-05-30T18:32:33+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman Reviewed-by: Kate Stewart Signed-off-by: Greg Kroah-Hartman

arch: Use asm-generic header for asm/mmiowb.h

2019-04-08T10:59:43+00:00

Hook up asm-generic/mmiowb.h to Kbuild for all architectures so that we can subsequently include asm/mmiowb.h from core code. Cc: Masahiro Yamada Cc: Arnd Bergmann Acked-by: Linus Torvalds Signed-off-by: Will Deacon

um: remove redundant generic-y

2018-12-27T21:48:34+00:00

This commit removes redundant generic-y defines in arch/um/include/asm/Kbuild. It is redundant to define generic-y when arch-specific implementation exists in arch/$(ARCH)/include/asm/*.h Remove the following generic-y: hardirq.h io.h Signed-off-by: Masahiro Yamada Signed-off-by: Richard Weinberger

time: Add an asm-generic/compat.h file

2018-04-19T11:28:51+00:00

We have a couple of files that try to include asm/compat.h on architectures where this is available. Those should generally use the higher-level linux/compat.h file, but that in turn fails to include asm/compat.h when CONFIG_COMPAT is disabled, unless we can provide that header on all architectures. This adds the asm/compat.h for all remaining architectures to simplify the dependencies. Architectures that are getting removed in linux-4.17 are not changed here, to avoid needless conflicts with the removal patches. Those architectures are broken by this patch, but we have already shown that they have no users. Signed-off-by: Arnd Bergmann

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2018-02-02T00:56:07+00:00

Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...

arch: Remove clkdev.h asm-generic from Kbuild

2018-01-03T17:02:11+00:00

Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King Acked-by: Arnd Bergmann Cc: Acked-by: Geert Uytterhoeven [m68k] Signed-off-by: Stephen Boyd

bpf: fix build issues on um due to mising bpf_perf_event.h

2017-12-12T17:51:12+00:00

Since c895f6f703ad ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build on i386 or x86_64: [...] CC init/main.o In file included from ../include/linux/perf_event.h:18:0, from ../include/linux/trace_events.h:10, from ../include/trace/syscall.h:7, from ../include/linux/syscalls.h:82, from ../init/main.c:20: ../include/uapi/linux/bpf_perf_event.h:11:32: fatal error: asm/bpf_perf_event.h: No such file or directory #include [...] Lets add missing bpf_perf_event.h also to um arch. This seems to be the only one still missing. Fixes: c895f6f703ad ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") Reported-by: Randy Dunlap Suggested-by: Richard Weinberger Signed-off-by: Daniel Borkmann Tested-by: Randy Dunlap Cc: Hendrik Brueckner Cc: Richard Weinberger Acked-by: Alexei Starovoitov Acked-by: Richard Weinberger Signed-off-by: Alexei Starovoitov