kernel/linux.git/arch/sh/mm, branch linux-4.16.y

sh: switch to NO_BOOTMEM

2018-06-20T19:01:41+00:00

[ Upstream commit ac21fc2dcb405cf250ad3f1228f64f64930d9211 ] Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") inadvertently switched the DT unflattening allocations from memblock to bootmem which doesn't work because the unflattening happens before bootmem is initialized. Swapping the order of bootmem init and unflattening could also fix this, but removing bootmem is desired. So enable NO_BOOTMEM on SH like other architectures have done. Fixes: 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") Reported-by: Rich Felker Cc: Yoshinori Sato Signed-off-by: Rob Herring Signed-off-by: Rich Felker Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm: pass the vmem_altmap to arch_remove_memory and __remove_pages

2018-01-08T19:46:23+00:00

We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams

mm: pass the vmem_altmap to arch_add_memory and __add_pages

2018-01-08T19:46:23+00:00

We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams

mm: don't export arch_add_memory

2018-01-08T19:46:23+00:00

Only x86_64 and sh export this symbol, and it is not used by any modular code. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams

Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping

2017-11-15T00:54:12+00:00

Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sh: make dma_cache_sync a no-op

2017-10-19T14:37:44+00:00

sh does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't make any sense to do any work in dma_cache_sync given that it must be a no-op when dma_alloc_attrs returns coherent memory. On the other hand sh uses dma_cache_sync internally in the dma_ops implementation and for the maple bus that does not use the DMA API, so a the old functionality for dma_cache_sync is still provided under the name sh_sync_dma_for_device, and without the redundant dev argument. While at it two of the syncing dma_ops also go the proper _for_device postfix. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

sh: move inline before return type

2017-07-12T23:26:04+00:00

Make the code like the rest of the kernel. Link: http://lkml.kernel.org/r/f81bb2a67a97b1fd8b6ea99bd350d8a0f6864fb1.1499284835.git.joe@perches.com Signed-off-by: Joe Perches Cc: Yoshinori Sato Cc: Rich Felker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

lib/extable.c: use bsearch() library function in search_extable()

2017-07-10T23:32:35+00:00

[thomas@m3y3r.de: v3: fix arch specific implementations] Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.de Signed-off-by: Thomas Meyer Cc: Rasmus Villemoes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/hugetlb: add size parameter to huge_pte_offset()

2017-07-06T23:24:34+00:00

A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal Acked-by: Steve Capper Cc: Catalin Marinas Cc: Will Deacon Cc: Tony Luck Cc: Fenghua Yu Cc: James Hogan (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle (supporter:MIPS) Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Yoshinori Sato Cc: Rich Felker Cc: "David S. Miller" Cc: Chris Metcalf Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Alexander Viro Cc: Michal Hocko Cc: Mike Kravetz Cc: Naoya Horiguchi Cc: "Aneesh Kumar K.V" Cc: "Kirill A. Shutemov" Cc: Hillf Danton Cc: Mark Rutland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds