kernel/linux.git/arch/sh/include/cpu-sh4, branch v6.12.80

sh: dma: Drop incorrect SH_DMAC_BASE1 definition for SH4

2023-07-05T16:55:25+00:00

None of the supported SH4 family SoCs features a second DMAC module. As this definition negatively impacts DMA channel calculation for the above targets, remove it from the code. Signed-off-by: Artur Rojek Reviewed-by: Geert Uytterhoeven Reviewed-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230527164452.64797-3-contact@artur-rojek.eu Signed-off-by: John Paul Adrian Glaubitz

pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B

2019-11-01T12:42:52+00:00

The definitions for bit field [19:18] of the Peripheral Function Select Register 3 were accidentally copied from bit field [20], leading to duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and ET0_ETXD4 functions. Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4 enum values, and correcting the functions. Reported-by: Ben Dooks Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be

sh: sh7786: Add explicit I/O cast to sh7786_mm_sel()

2019-04-02T07:57:50+00:00

When compile-testing on arm: arch/sh/include/cpu-sh4/cpu/sh7786.h: In function ‘sh7786_mm_sel’: arch/sh/include/cpu-sh4/cpu/sh7786.h:135:21: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [-Wint-conversion] return __raw_readl(0xFC400020) & 0x7; ^~~~~~~~~~ In file included from include/linux/io.h:25:0, from arch/sh/include/cpu-sh4/cpu/sh7786.h:14, from drivers/pinctrl/sh-pfc/pfc-sh7786.c:15: arch/arm/include/asm/io.h:113:21: note: expected ‘const volatile void *’ but argument is of type ‘unsigned int’ #define __raw_readl __raw_readl ^ arch/arm/include/asm/io.h:114:19: note: in expansion of macro ‘__raw_readl’ static inline u32 __raw_readl(const volatile void __iomem *addr) ^~~~~~~~~~~ __raw_readl() on SuperH is a macro that casts the passed I/O address to the correct type, while the implementations on most other architectures expect to be passed the correct pointer type. Add an explicit cast to fix this. Note that this also gets rid of a sparse warning on SuperH: arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: warning: incorrect type in argument 1 (different base types) arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: expected void const volatile [noderef] * arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: got unsigned int Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman

sh: include: convert to SPDX identifiers

2018-12-28T20:11:45+00:00

Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87ftvccszx.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto Reviewed-by: Simon Horman Cc: Rich Felker Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arch/sh: add sh7786_mm_sel() function

2018-04-12T23:47:53+00:00

The SH7786 has different physical memory layout configurations, configurable through the MMSELR register. The configuration is typically defined by the bootloader, so Linux generally doesn't care. Except that depending on the configuration, some PCI MEM areas may or may not be available. This commit adds a helper function that allows to retrieve the current physical memory layout configuration. It will be used in a following patch to exclude unusable PCI MEM areas during the PCI initialization. Signed-off-by: Thomas Petazzoni Signed-off-by: Rich Felker

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sh: sh7757: remove nonexistent GPIO_PT[JLNQ]7_RESV to fix pinctrl registration

2017-10-04T00:54:24+00:00

Commit 3810e96056ff ("sh: modify pinmux for SH7757 2nd cut") renamed GPIO_PT[JLNQ]7 to GPIO_PT[JLNQ]7_RESV, and removed the existing users from the pinmux_pins[] array. However, pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. Hence entries were not really removed, but replaced by (zero-filled) holes. Such entries are treated as pin zero, which was registered before, thus leading to pinctrl registration failures, as seen on sh7722: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 Remove GPIO_PT[JLNQ]7_RESV from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-3-git-send-email-geert+renesas@glider.be Fixes: 3810e96056ffddf6 ("sh: modify pinmux for SH7757 2nd cut") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Cc: Jacopo Mondi Cc: Magnus Damm Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration

2017-10-04T00:54:24+00:00

Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration", v2. Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. Apparently GPIO_PTQ7 was defined in the enum, but never used. If enum values are defined, but never used, pinmux_pins[] contains (zero-filled) holes. Hence such entries are treated as pin zero, which was registered before, and pinctrl registration fails. I can't see how this ever worked, as at the time of commit f5e25ae52fef ("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and drivers/pinctrl/core.c already had the check. Some scripting revealed a few more broken drivers: - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV. - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with PINMUX_GPIO(). Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should fix the issue on the other 3 SoCs, but was untested due to lack of hardware. This patch (of 4): On sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is defined in the enum, but never used, pinmux_pins[] contains a (zero-filled) hole. Hence this entry is treated as pin zero, which was registered before, and pinctrl registration fails. According to the datasheet, port PTQ7 does not exist. Hence remove GPIO_PTQ7 from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code") Signed-off-by: Geert Uytterhoeven Reported-by: Magnus Damm Reviewed-by: Laurent Pinchart Tested-by: Jacopo Mondi Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sh: remove CPU_SUBTYPE_SH7764

2014-08-07T01:01:12+00:00

The symbol is an orphan, get rid of it. Submitted by Richard a few months ago as "[PATCH 21/28] Remove CPU_SUBTYPE_SH7764". [pebolle@tiscali.nl: re-added dropped ||] Signed-off-by: Richard Weinberger Signed-off-by: Paul Bolle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sh: prefix sh-specific "CCR" and "CCR2" by "SH_"

2014-03-04T15:55:49+00:00

Commit bcf24e1daa94 ("mmc: omap_hsmmc: use the generic config for omap2plus devices"), enabled the build for other platforms for compile testing. sh-allmodconfig now fails with: include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1 This happens because SuperH #defines "CCR", which is one of the enum values in include/linux/omap-dma.h. There's a similar issue with "CCR2" on sh2a. As "CCR" and "CCR2" are too generic names for global #defines, prefix them with "SH_" to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds