kernel/linux.git/arch/s390/tools, branch v6.12.80

Merge tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-09-21T16:02:54+00:00

Pull s390 updates from Vasily Gorbik: - Optimize ftrace and kprobes code patching and avoid stop machine for kprobes if sequential instruction fetching facility is available - Add hiperdispatch feature to dynamically adjust CPU capacity in vertical polarization to improve scheduling efficiency and overall performance. Also add infrastructure for handling warning track interrupts (WTI), allowing for graceful CPU preemption - Rework crypto code pkey module and split it into separate, independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only when the relevant hardware is available - Add hardware acceleration for HMAC modes and the full AES-XTS cipher, utilizing message-security assist extensions (MSA) 10 and 11. It introduces new shash implementations for HMAC-SHA224/256/384/512 and registers the hardware-accelerated AES-XTS cipher as the preferred option. Also add clear key token support - Add MSA 10 and 11 processor activity instrumentation counters to perf and update PAI Extension 1 NNPA counters - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE statements - Add support for SHA3 performance enhancements introduced with MSA 12 - Add support for the query authentication information feature of MSA 13 and introduce the KDSA CPACF instruction. Provide query and query authentication information in sysfs, enabling tools like cpacfinfo to present this data in a human-readable form - Update kernel disassembler instructions - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure kpatch compatibility - Add missing warning handling and relocated lowcore support to the early program check handler - Optimize ftrace_return_address() and avoid calling unwinder - Make modules use kernel ftrace trampolines - Strip relocs from the final vmlinux ELF file to make it roughly 2 times smaller - Dump register contents and call trace for early crashes to the console - Generate ptdump address marker array dynamically - Fix rcu_sched stalls that might occur when adding or removing large amounts of pages at once to or from the CMM balloon - Fix deadlock caused by recursive lock of the AP bus scan mutex - Unify sync and async register save areas in entry code - Cleanup debug prints in crypto code - Various cleanup and sanitizing patches for the decompressor - Various small ftrace cleanups * tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits) s390/crypto: Display Query and Query Authentication Information in sysfs s390/crypto: Add Support for Query Authentication Information s390/crypto: Rework RRE and RRF CPACF inline functions s390/crypto: Add KDSA CPACF Instruction s390/disassembler: Remove duplicate instruction format RSY_RDRU s390/boot: Move boot_printk() code to own file s390/boot: Use boot_printk() instead of sclp_early_printk() s390/boot: Rename decompressor_printk() to boot_printk() s390/boot: Compile all files with the same march flag s390: Use MARCH_HAS_*_FEATURES defines s390: Provide MARCH_HAS_*_FEATURES defines s390/facility: Disable compile time optimization for decompressor code s390/boot: Increase minimum architecture to z10 s390/als: Remove obsolete comment s390/sha3: Fix SHA3 selftests failures s390/pkey: Add AES xts and HMAC clear key token support s390/cpacf: Add MSA 10 and 11 new PCKMO functions s390/mm: Add cond_resched() to cmm_alloc/free_pages() s390/pai_ext: Update PAI extension 1 counters s390/pai_crypto: Add support for MSA 10 and 11 pai counters ...

s390/disassembler: Remove duplicate instruction format RSY_RDRU

2024-09-12T12:13:27+00:00

Instruction format RSY_RDRU is a duplicate of RSY_RURD2. Use the latter, as it follows the s390-specific conventions for instruction format naming used in binutils. Reviewed-by: Heiko Carstens Signed-off-by: Jens Remus Signed-off-by: Vasily Gorbik

s390/disassembler: Add instructions

2024-08-29T20:56:33+00:00

Add more instructions to the kernel disassembler. Reviewed-by: Jens Remus Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/disassembler: Update instruction mnemonics to latest spec

2024-08-29T20:56:33+00:00

Over the course of CPU generations a few instructions got extended, changing their base mnemonic, while keeping the former as an extended mnemonic. Update the instruction mnemonics in the disassembler to their latest base mnemonic as documented in the latest IBM z/Architecture Principles of Operation specification [1]. With the IBM z14 the base mnemonics of the following vector instructions have been changed: - Vector FP Load Lengthened (VFLL) - Vector FP Load Rounded (VFLR) With Message-Security-Assist Extension 5 Perform Pseudorandom Number Operation (PPNO) has been renamed to Perform Random Number Operation (PRNO). With Vector Enhancements Facility 2 the base mnemonics of the following vector instructions have been changed: - Vector FP Convert from Fixed (VCFPS) - Vector FP Convert from Logical (VCFPL) - Vector FP Convert to Fixed (VCSFP) - Vector FP Convert to Logical (VCLFP) [1] IBM z/Architecture Principles of Operation, SA22-7832-13, IBM z16, https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf Acked-by: Vasily Gorbik Signed-off-by: Jens Remus Signed-off-by: Vasily Gorbik

s390/boot: Fix KASLR base offset off by __START_KERNEL bytes

2024-08-22T17:24:13+00:00

Symbol offsets to the KASLR base do not match symbol address in the vmlinux image. That is the result of setting the KASLR base to the beginning of .text section as result of an optimization. Revert that optimization and allocate virtual memory for the whole kernel image including __START_KERNEL bytes as per the linker script. That allows keeping the semantics of the KASLR base offset in sync with other architectures. Rename __START_KERNEL to TEXT_OFFSET, since it represents the offset of the .text section within the kernel image, rather than a virtual address. Still skip mapping TEXT_OFFSET bytes to save memory on pgtables and provoke exceptions in case an attempt to access this area is made, as no kernel symbol may reside there. In case CONFIG_KASAN is enabled the location counter might exceed the value of TEXT_OFFSET, while the decompressor linker script forcefully resets it to TEXT_OFFSET, which leads to a sections overlap link failure. Use MAX() expression to avoid that. Reported-by: Omar Sandoval Closes: https://lore.kernel.org/linux-s390/ZnS8dycxhtXBZVky@telecaster.dhcp.thefacebook.com/ Fixes: 56b1069c40c7 ("s390/boot: Rework deployment of the kernel image") Signed-off-by: Alexander Gordeev Acked-by: Vasily Gorbik Signed-off-by: Vasily Gorbik

s390/boot: Rework deployment of the kernel image

2024-04-17T11:38:02+00:00

Rework deployment of kernel image for both compressed and uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel configuration variable. In case CONFIG_KERNEL_UNCOMPRESSED is disabled avoid uncompressing the kernel to a temporary buffer and copying it to the target address. Instead, uncompress it directly to the target destination. In case CONFIG_KERNEL_UNCOMPRESSED is enabled avoid moving the kernel to default 0x100000 location when KASLR is disabled or failed. Instead, use the uncompressed kernel image directly. In case KASLR is disabled or failed .amode31 section location in memory is not randomized and precedes the kernel image. In case CONFIG_KERNEL_UNCOMPRESSED is disabled that location overlaps the area used by the decompression algorithm. That is fine, since that area is not used after the decompression finished and the size of .amode31 section is not expected to exceed BOOT_HEAP_SIZE ever. There is no decompression in case CONFIG_KERNEL_UNCOMPRESSED is enabled. Therefore, rename decompress_kernel() to deploy_kernel(), which better describes both uncompressed and compressed cases. Introduce AMODE31_SIZE macro to avoid immediate value of 0x3000 (the size of .amode31 section) in the decompressor linker script. Modify the vmlinux linker script to force the size of .amode31 section to AMODE31_SIZE (the value of (_eamode31 - _samode31) could otherwise differ as result of compiler options used). Introduce __START_KERNEL macro that defines the kernel ELF image entry point and set it to the currrent value of 0x100000. Signed-off-by: Alexander Gordeev

s390: Map kernel at fixed location when KASLR is disabled

2024-04-17T11:38:02+00:00

Since kernel virtual and physical address spaces are uncoupled the kernel is mapped at the top of the virtual address space in case KASLR is disabled. That does not pose any issue with regard to the kernel booting and operation, but makes it difficult to use a generated vmlinux with some debugging tools (e.g. gdb), because the exact location of the kernel image in virtual memory is unknown. Make that location known and introduce CONFIG_KERNEL_IMAGE_BASE configuration option. A custom CONFIG_KERNEL_IMAGE_BASE value that would break the virtual memory layout leads to a build error. The kernel image size is defined by KERNEL_IMAGE_SIZE macro and set to 512 MB, by analogy with x86. Suggested-by: Vasily Gorbik Signed-off-by: Alexander Gordeev

s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64

2024-03-07T16:02:05+00:00

lkp test robot reported unhandled relocation type: R_390_GOTPCDBL, when kernel is built with -fno-PIE. relocs tool reads vmlinux and handles absolute relocations. PC relative relocs doesn't need adjustment. Also, the R_390_GOTPCDBL/R_390_GOTOFF64 relocations are present currently only when KASAN is enabled. The following program can create a R_390_GOTPCDBL/R_390_GOTOFF64 reloc (with fPIE/fPIC). void funcb(int *b) { *b = *b + 100; } void gen_gotoff(void) { int b = 10; funcb (&b); } gcc -c sample.c -fPIC -fsanitize=kernel-address --param asan-stack=1 The above example (built with -fPIC) was linked to one of the built-in.a (built with -fno-PIE) and checked for correctness with kaslr enabled. Both the relocs turns out relative and can be skipped. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202402221404.T2TGs8El-lkp@intel.com/ Fixes: 55dc65b46023 ("s390: add relocs tool") Signed-off-by: Sumanth Korikkar Acked-by: Vasily Gorbik Signed-off-by: Heiko Carstens

s390: add relocs tool

2024-02-20T13:37:33+00:00

This 'relocs' tool is copied from the x86 version, ported for s390, and greatly simplified to remove unnecessary features. It reads vmlinux and outputs assembly to create a .vmlinux.relocs_64 section which contains the offsets of all R_390_64 relocations which apply to allocatable sections. Acked-by: Vasily Gorbik Signed-off-by: Josh Poimboeuf Signed-off-by: Sumanth Korikkar Link: https://lore.kernel.org/r/20240219132734.22881-3-sumanthk@linux.ibm.com Signed-off-by: Heiko Carstens

s390/als: add vector facility to z13 architecture level set

2023-12-11T13:33:07+00:00

Add the vector facility to the z13 architecture level set (ALS). All hypervisors support the vector facility since many years. Adding the facility to the ALS allows for compile time optimizations of the kernel: if the kernel is compiled for z13 or later, all tests which verify if the vector facility is present can return "true". This will be implemented with a subsequent patch. Reviewed-by: Hendrik Brueckner Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev