kernel/linux.git/arch/s390/include/uapi, branch v5.15.208

s390/dasd: add autoquiesce feature

2024-03-26T22:21:14+00:00

[ Upstream commit 1cee2975bbabd89df1097c354867192106b058ea ] Add the internal logic to check for autoquiesce triggers and handle them. Quiesce and resume are functions that tell Linux to stop/resume issuing I/Os to a specific DASD. The DASD driver allows a manual quiesce/resume via ioctl. Autoquiesce will define an amount of triggers that will lead to an automatic quiesce if a certain event occurs. There is no automatic resume. All events will be reported via DASD Extended Error Reporting (EER) if configured. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Halil Pasic Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com Signed-off-by: Jens Axboe Stable-dep-of: c3116e62ddef ("s390/dasd: fix double module refcount decrement") Signed-off-by: Sasha Levin

s390: add struct tpi_info to struct pt_regs

2021-06-07T15:07:01+00:00

To avoid casting ptrace members, add a union containing both struct tpi_info and explicit int_code/int_parm members. Signed-off-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/cpumf: rename header file to hwctrset.h

2021-03-08T09:46:28+00:00

Signed-off-by: Thomas Richter Suggested-by: Hendrick Brueckner Acked-by: Heiko Carstens Signed-off-by: Heiko Carstens

s390/cpumf: Add support for complete counter set extraction

2021-02-23T23:31:23+00:00

Add support to the CPU Measurement counter facility device driver to extract complete counter sets per CPU and per counter set from user space. This includes a new device named /dev/hwctr and support for the device driver functions open, close and ioctl. Other functions are not supported. The ioctl command supports 3 subcommands: S390_HWCTR_START: enables counter sets on a list of CPUs. S390_HWCTR_STOP: disables counter sets on a list of CPUs. S390_HWCTR_READ: reads counter sets on a list of CPUs. The ioctl(..., S390_HWCTR_READ, ...) is the only subcommand which returns data. It requires member data_bytes to be positive and indicates the maximum amount of data available to store counter set data. The other ioctl() subcommands do not use this member and it should be set to zero. The S390_HWCTR_READ subcommand returns the following data: The cpuset data is flattened using the following scheme, stored in member data: 0x0 0x8 0xc 0x10 0x10 0x18 0x20 0x28 0xU-1 +---------+-----+---------+-----+---------+-----+-----+------+------+ | no_cpus | cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n | +---------+-----+---------+-----+---------+-----+-----+------+------+ 0xU 0xU+4 0xU+8 0xU+10 0xV-1 +-----+---------+-----+-----+------+------+ | set | no_cnts | cv1 | cv2 | .... | cv_n | +-----+---------+-----+-----+------+------+ 0xV 0xV+4 0xV+8 0xV+c +-----+---------+-----+---------+-----+-----+------+------+ | cpu | no_sets | set | no_cnts | cv1 | cv2 | .... | cv_n | +-----+---------+-----+---------+-----+-----+------+------+ U and V denote arbitrary hexadezimal addresses. The first integer represents the number of CPUs data was extracted from. This is followed by CPU number and number of counter sets extracted. Both are two integer values. This is followed by the set identifer and number of counters extracted. Both are two integer values. This is followed by the counter values, each element is eight bytes in size. The S390_HWCTR_READ ioctl subcommand is also limited to one call per minute. This ensures that an application does not read out the counter sets too often and reduces the overall CPU performance. The complete counter set extraction is an expensive operation. Reviewed-by: Sumanth Korikkar Signed-off-by: Thomas Richter Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390: convert to generic entry

2021-01-19T11:29:26+00:00

This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle Signed-off-by: Vasily Gorbik

arch: move SA_* definitions to generic headers

2020-11-23T16:31:05+00:00

Most architectures with the exception of alpha, mips, parisc and sparc use the same values for these flags. Move their definitions into asm-generic/signal-defs.h and allow the architectures with non-standard values to override them. Also, document the non-standard flag values in order to make it easier to add new generic flags in the future. A consequence of this change is that on powerpc and x86, the constants' values aside from SA_RESETHAND change signedness from unsigned to signed. This is not expected to impact realistic use of these constants. In particular the typical use of the constants where they are or'ed together and assigned to sa_flags (or another int variable) would not be affected. Signed-off-by: Peter Collingbourne Acked-by: Geert Uytterhoeven Acked-by: "Eric W. Biederman" Reviewed-by: Dave Martin Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528 Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com Signed-off-by: Eric W. Biederman

s390/sie: fix typo in SIGP code description

2020-10-07T19:50:02+00:00

s/ait address/at address Signed-off-by: Julian Wiedmann Acked-by: Christian Borntraeger Signed-off-by: Vasily Gorbik

s390/pkey: support CCA and EP11 secure ECC private keys

2020-09-24T08:03:28+00:00

This patch extends the pkey kernel module to support CCA and EP11 secure ECC (private) keys as source for deriving ECC protected (private) keys. There is yet another new ioctl to support this: PKEY_KBLOB2PROTK3 can handle all the old keys plus CCA and EP11 secure ECC keys. For details see ioctl description in pkey.h. The CPACF unit currently only supports a subset of 5 different ECC curves (P-256, P-384, P-521, ED25519, ED448) and so only keys of this curve type can be transformed into protected keys. However, the pkey and the cca/ep11 low level functions do not check this but simple pass-through the key blob to the firmware onto the crypto cards. So most likely the failure will be a response carrying an error code resulting in user space errno value EIO instead of EINVAL. Deriving a protected key from an EP11 ECC secure key requires a CEX7 in EP11 mode. Deriving a protected key from an CCA ECC secure key requires a CEX7 in CCA mode. Together with this new ioctl the ioctls for querying lists of apqns (PKEY_APQNS4K and PKEY_APQNS4KT) have been extended to support EP11 and CCA ECC secure key type and key blobs. Together with this ioctl there comes a new struct ep11kblob_header which is to be prepended onto the EP11 key blob. See details in pkey.h for the fields in there. The older EP11 AES key blob with some info stored in the (unused) session field is also supported with this new ioctl. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Signed-off-by: Vasily Gorbik

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-08-06T19:59:31+00:00

Pull KVM updates from Paolo Bonzini: "s390: - implement diag318 x86: - Report last CPU for debugging - Emulate smaller MAXPHYADDR in the guest than in the host - .noinstr and tracing fixes from Thomas - nested SVM page table switching optimization and fixes Generic: - Unify shadow MMU cache data structures across architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) KVM: SVM: Fix sev_pin_memory() error handling KVM: LAPIC: Set the TDCR settable bits KVM: x86: Specify max TDP level via kvm_configure_mmu() KVM: x86/mmu: Rename max_page_level to max_huge_page_level KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch KVM: x86: Pull the PGD's level from the MMU instead of recalculating it KVM: VMX: Make vmx_load_mmu_pgd() static KVM: x86/mmu: Add separate helper for shadow NPT root page role calc KVM: VMX: Drop a duplicate declaration of construct_eptp() KVM: nSVM: Correctly set the shadow NPT root level in its MMU role KVM: Using macros instead of magic values MIPS: KVM: Fix build error caused by 'kvm_run' cleanup KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support KVM: VMX: optimize #PF injection when MAXPHYADDR does not match KVM: VMX: Add guest physical address check in EPT violation and misconfig KVM: VMX: introduce vmx_need_pf_intercept KVM: x86: update exception bitmap on CPUID changes KVM: x86: rename update_bp_intercept to update_exception_bitmap ...

s390/zcrypt: code beautification and struct field renames

2020-07-03T08:49:34+00:00

Some beautifications related to the internal only used struct ap_message and related code. Instead of one int carrying only the special flag now a u32 flags field is used. At struct CPRBX the pointers to additional data are now marked with __user. This caused some changes needed on code, where these structs are also used within the zcrypt misc functions. The ica_rsa_* structs now use the generic types __u8, __u32, ... instead of char, unsigned int. zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min(). Signed-off-by: Harald Freudenberger Signed-off-by: Heiko Carstens