kernel/linux.git/arch/s390/include/asm/processor.h, branch v5.15.208

sched: Add wrapper for get_wchan() to keep task blocked

2025-08-28T14:24:03+00:00

commit 42a20f86dc19f9282d974df0ba4d226c865ab9dd upstream. Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra Signed-off-by: Kees Cook Signed-off-by: Peter Zijlstra (Intel) Acked-by: Geert Uytterhoeven Acked-by: Russell King (Oracle) [arm] Tested-by: Mark Rutland [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org Signed-off-by: Siddhi Katage Signed-off-by: Greg Kroah-Hartman

s390: Mark psw in __load_psw_mask() as __unitialized

2024-07-18T11:07:38+00:00

[ Upstream commit 7278a8fb8d032dfdc03d9b5d17e0bc451cdc1492 ] Without __unitialized, the following code is generated when INIT_STACK_ALL_ZERO is enabled: 86: d7 0f f0 a0 f0 a0 xc 160(16,%r15), 160(%r15) 8c: e3 40 f0 a0 00 24 stg %r4, 160(%r15) 92: c0 10 00 00 00 08 larl %r1, 0xa2 98: e3 10 f0 a8 00 24 stg %r1, 168(%r15) 9e: b2 b2 f0 a0 lpswe 160(%r15) The xc is not adding any security because psw is fully initialized with the following instructions. Add __unitialized to the psw definitiation to avoid the superfluous clearing of psw. Reviewed-by: Heiko Carstens Signed-off-by: Sven Schnelle Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin

s390/maccess: rework absolute lowcore accessors

2022-08-17T12:24:13+00:00

[ Upstream commit ed0192bc644f3553d64a5cb461bdd0b1fbae3fdf ] Macro mem_assign_absolute() is able to access the whole memory, but is only used and makes sense when updating the absolute lowcore. Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros that limit access to absolute lowcore addresses only. Suggested-by: Heiko Carstens Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

s390/maccess: fix semantics of memcpy_real() and its callers

2022-08-17T12:24:09+00:00

[ Upstream commit 303fd988ed644c7daa260410f3ac99266573557d ] There is a confusion with regard to the source address of memcpy_real() and calling functions. While the declared type for a source assumes a virtual address, in fact it always called with physical address of the source. This confusion led to bugs in copy_oldmem_kernel() and copy_oldmem_user() functions, where __pa() macro applied mistakenly to physical addresses. It does not lead to a real issue, since virtual and physical addresses are currently the same. Fix both the bugs and memcpy_real() prototype by making type of source address consistent to the function name and the way it actually used. Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

s390/smp: enable DAT before CPU restart callback is called

2021-08-26T18:22:12+00:00

The restart interrupt is triggered whenever a secondary CPU is brought online, a remote function call dispatched from another CPU or a manual PSW restart is initiated and causes the system to kdump. The handling routine is always called with DAT turned off. It then initializes the stack frame and invokes a callback. The existing callbacks handle DAT as follows: * __do_restart() and __machine_kexec() turn in on upon entry; * __ipl_run(), __reipl_run() and __dump_run() do not turn it right away, but all of them call diag308() - which turns DAT on, but only if kasan is enabled; In addition to the described complexity all callbacks (and the functions they call) should avoid kasan instrumentation while DAT is off. This update enables DAT in the assembler restart handler and relieves any callbacks (which are mostly C functions) from dealing with DAT altogether. There are four types of CPU restart that initialize control registers in different ways: 1. Start of secondary CPU on boot - control registers are inherited from the IPL CPU; 2. Restart of online CPU - control registers of the CPU being restarted are kept; 3. Hotplug of offline CPU - control registers are inherited from the starting CPU; 4. Start of offline CPU triggered by manual PSW restart - the control registers are read from the absolute lowcore and contain the boot time IPL CPU values updated with all follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit() routines; In first three cases contents of the control registers is the most recent. In the latter case control registers are good enough to facilitate successful completion of kdump operation. Suggested-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Heiko Carstens

s390/processor: always inline stap() and __load_psw_mask()

2021-06-18T14:41:19+00:00

s390 is the only architecture which makes use of the __no_kasan_or_inline attribute for two functions. Given that both stap() and __load_psw_mask() are very small functions they can and should be always inlined anyway. Therefore get rid of __no_kasan_or_inline and always inline these functions. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/traps: add struct to access transactional diagnostic block

2021-06-07T15:06:58+00:00

gcc-11 warns: arch/s390/kernel/traps.c: In function __do_pgm_check: arch/s390/kernel/traps.c:319:17: warning: memcpy reading 256 bytes from a region of size 0 [-Wstringop-overread] 319 | memcpy(¤t->thread.trap_tdb, &S390_lowcore.pgm_tdb, 256); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by adding a struct pgm_tdb to struct lowcore and copy that. Signed-off-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390: pass struct pt_regs instead of registers to syscalls

2021-01-19T11:29:27+00:00

Instead of fetching all registers from struct pt_regs and passing them to the syscall wrappers, let the system call wrappers only fetch the values really required. Signed-off-by: Sven Schnelle Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390: convert to generic entry

2021-01-19T11:29:26+00:00

This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle Signed-off-by: Vasily Gorbik

s390/idle: merge enabled_wait() and arch_cpu_idle()

2020-12-16T13:55:49+00:00

The only caller of enabled_wait() besides arch_cpu_idle() was udelay(). Since that call doesn't exist anymore, merge enabled_wait() and arch_cpu_idle(). Signed-off-by: Heiko Carstens