kernel/linux.git/arch/s390/include/asm/debug.h, branch linux-5.9.y

s390/debug: debug feature version 3

2020-08-11T16:16:43+00:00

Change __debug_entry structure in the following way: - remove redundant union - Field containing cpuid is expanded to 16 bits. 8-bit width was not enough since we already support up to 512 cpus. - Field containing the timestamp is expanded to 60 bits. The timestamp itself is now stored in the absolute Unix time format in microseconds taking the Epoch Index into acount. Adjust default header for debug entries by setting minimum width for cpuid to 4 digits. Reviewed-by: Heiko Carstens Signed-off-by: Mikhail Zaslonko Signed-off-by: Heiko Carstens

s390/debug: remove struct __debug_entry from uapi

2020-06-29T14:32:25+00:00

There is no interface to userspace which exposes anything that would require the struct __debug_entry definition. Therefore remove it from uapi. This allows to change the definition, since it is only kernel internally used. The only exception is the crash utility, however that tool must handle changes all the time anyway. Signed-off-by: Heiko Carstens

s390/debug: remove raw view

2020-06-29T14:32:20+00:00

There is not a single user of the debug raw view. Therefore remove it before anybody uses it. If anybody would make use of the view it would expose the struct __debug_entry definition to userspace and really would make it uapi. This wouldn't be good, since the definition is suboptimal and needs to be changed. Right now the structure definition is only defined to be uapi, however there is no user. Signed-off-by: Heiko Carstens

docs: s390: unify and update s390dbf kdocs at debug.c

2019-07-05T11:42:22+00:00

For non-static-inlines, debug.c already had non-compliant function header docs. So move the pure prototype kdocs of ("s390: include/asm/debug.h add kerneldoc markups") from debug.h to debug.c and merge them with the old function docs. Also, I had the impression that kdoc typically is at the implementation in the compile unit rather than at the prototype in the header file. While at it, update the short kdoc description to distinguish the different functions. And a few more consistency cleanups. Added a new kdoc for debug_set_critical() since debug.h comments it as part of the API. Signed-off-by: Steffen Maier Acked-by: Christian Borntraeger Message-Id: <1562149189-1417-3-git-send-email-maier@linux.ibm.com> Signed-off-by: Vasily Gorbik

s390: include/asm/debug.h add kerneldoc markups

2019-06-11T07:48:20+00:00

Instead of keeping the documentation inside s390dbf.rst, move them to arch/s390/include/asm/debug.h, using standard kernel-doc markups. Keeping the documentation close to the code helps to keep it updated. It also makes easier to document other stuff inside debug.h, as all it needs is to add kernel-doc markups inside it, as the file will be already be included at the produced documentation. - Those were converted to kerneldoc using this script specially designed to parse ths file, and manually editted: Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Heiko Carstens

docs: s390: convert docs to ReST and rename to *.rst

2019-06-11T07:48:14+00:00

Convert all text files with s390 documentation to ReST format. Tried to preserve as much as possible the original document format. Still, some of the files required some work in order for it to be visible on both plain text and after converted to html. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Heiko Carstens

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2017-11-13T19:47:01+00:00

Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/debug: adjust coding style

2017-10-16T06:19:26+00:00

The debug feature code hasn't been touched in ages and the code also looks like this. Therefore clean up the code so it looks a bit more like current coding style. There is no functional change - actually I made also sure that the generated code with performance_defconfig is identical. A diff of old vs new with "objdump -d" is empty. The code is still not checkpatch clean, but that was not the goal. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390: convert debug_info.ref_count from atomic_t to refcount_t

2017-05-11T14:35:32+00:00

refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova Signed-off-by: Hans Liljestrand Signed-off-by: Kees Cook Signed-off-by: David Windsor Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky