kernel/linux.git/arch/powerpc, branch master

Merge tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock

2026-04-18T18:29:14+00:00

Pull memblock updates from Mike Rapoport: - improve debuggability of reserve_mem kernel parameter handling with print outs in case of a failure and debugfs info showing what was actually reserved - Make memblock_free_late() and free_reserved_area() use the same core logic for freeing the memory to buddy and ensure it takes care of updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled. * tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: x86/alternative: delay freeing of smp_locks section memblock: warn when freeing reserved memory before memory map is initialized memblock, treewide: make memblock_free() handle late freeing memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y memblock: extract page freeing from free_reserved_area() into a helper memblock: make free_reserved_area() more robust mm: move free_reserved_area() to mm/memblock.c powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact() powerpc: fadump: pair alloc_pages_exact() with free_pages_exact() memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name() memblock: move reserve_bootmem_range() to memblock.c and make it static memblock: Add reserve_mem debugfs info memblock: Print out errors on reserve_mem parser

Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2026-04-17T22:58:22+00:00

Pull bpf fixes from Alexei Starovoitov: "Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI, since all JITs had to be touched to move constant blinding out and pass bpf_verifier_env in. - Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov) - Dissociate struct_ops program with map if map_update fails (Amery Hung) - Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann) - Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel Borkmann) - Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns (Eduard Zingerman) - Copy token from main to subprogs to fix missing kallsyms (Eduard Zingerman) - Prevent double close and leak of btf objects in libbpf (Jiri Olsa) - Fix af_unix null-ptr-deref in sockmap (Michal Luczaj) - Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta Yatsenko) - Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in arm64 and riscv JITs (Puranjay Mohan) - Fix out of bounds access. Validate node_id in arena_alloc_pages() (Puranjay Mohan) - Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan) - Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for indirect jump targets on x86-64, arm64 JITs (Xu Kuohai) - Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)" * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits) bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT bpf: Dissociate struct_ops program with map if map_update fails bpf: Validate node_id in arena_alloc_pages() libbpf: Prevent double close and leak of btf objects selftests/bpf: cover UTF-8 trace_printk output bpf: allow UTF-8 literals in bpf_bprintf_prepare() selftests/bpf: Reject scalar store into kptr slot bpf: Fix NULL deref in map_kptr_match_type for scalar regs bpf: Fix precedence bug in convert_bpf_ld_abs alignment check bpf, arm64: Emit BTI for indirect jump target bpf, x86: Emit ENDBR for indirect jump targets bpf: Add helper to detect indirect jump targets bpf: Pass bpf_verifier_env to JIT bpf: Move constants blinding out of arch-specific JITs bpf, sockmap: Take state lock for af_unix iter bpf, sockmap: Fix af_unix null-ptr-deref in proto update selftests/bpf: Extend bpf_iter_unix to attempt deadlocking bpf, sockmap: Fix af_unix iter deadlock bpf, sockmap: Annotate af_unix sock:: Sk_state data-races selftests/bpf: verify kallsyms entries for token-loaded subprograms ...

Merge tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

2026-04-17T22:42:01+00:00

Pull integrity updates from Mimi Zohar: "There are two main changes, one feature removal, some code cleanup, and a number of bug fixes. Main changes: - Detecting secure boot mode was limited to IMA. Make detecting secure boot mode accessible to EVM and other LSMs - IMA sigv3 support was limited to fsverity. Add IMA sigv3 support for IMA regular file hashes and EVM portable signatures Remove: - Remove IMA support for asychronous hash calculation originally added for hardware acceleration Cleanup: - Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG tests - Add descriptions of the IMA atomic flags Bug fixes: - Like IMA, properly limit EVM "fix" mode - Define and call evm_fix_hmac() to update security.evm - Fallback to using i_version to detect file change for filesystems that do not support STATX_CHANGE_COOKIE - Address missing kernel support for configured (new) TPM hash algorithms - Add missing crypto_shash_final() return value" * tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: evm: Enforce signatures version 3 with new EVM policy 'bit 3' integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG ima: add support to require IMA sigv3 signatures ima: add regular file data hash signature version 3 support ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures ima: remove buggy support for asynchronous hashes integrity: Eliminate weak definition of arch_get_secureboot() ima: Add code comments to explain IMA iint cache atomic_flags ima_fs: Correctly create securityfs files for unsupported hash algos ima: check return value of crypto_shash_final() in boot aggregate ima: Define and use a digest_size field in the ima_algo_desc structure powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG ima: fallback to using i_version to detect file change evm: fix security.evm for a file with IMA signature s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT evm: Don't enable fix mode when secure boot is enabled integrity: Make arch_ima_get_secureboot integrity-wide

Merge tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-04-17T03:11:56+00:00

Pull non-MM updates from Andrew Morton: - "pid: make sub-init creation retryable" (Oleg Nesterov) Make creation of init in a new namespace more robust by clearing away some historical cruft which is no longer needed. Also some documentation fixups - "selftests/fchmodat2: Error handling and general" (Mark Brown) Fix and a cleanup for the fchmodat2() syscall selftest - "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko) - "hung_task: Provide runtime reset interface for hung task detector" (Aaron Tomlin) Give administrators the ability to zero out /proc/sys/kernel/hung_task_detect_count - "tools/getdelays: use the static UAPI headers from tools/include/uapi" (Thomas Weißschuh) Teach getdelays to use the in-kernel UAPI headers rather than the system-provided ones - "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta) Several cleanups and fixups to the hardlockup detector code and its documentation - "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law) A couple of small/theoretical fixes in the bch code - "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo) - "cleanup the RAID5 XOR library" (Christoph Hellwig) A quite far-reaching cleanup to this code. I can't do better than to quote Christoph: "The XOR library used for the RAID5 parity is a bit of a mess right now. The main file sits in crypto/ despite not being cryptography and not using the crypto API, with the generic implementations sitting in include/asm-generic and the arch implementations sitting in an asm/ header in theory. The latter doesn't work for many cases, so architectures often build the code directly into the core kernel, or create another module for the architecture code. Change this to a single module in lib/ that also contains the architecture optimizations, similar to the library work Eric Biggers has done for the CRC and crypto libraries later. After that it changes to better calling conventions that allow for smarter architecture implementations (although none is contained here yet), and uses static_call to avoid indirection function call overhead" - "lib/list_sort: Clean up list_sort() scheduling workarounds" (Kuan-Wei Chiu) Clean up this library code by removing a hacky thing which was added for UBIFS, which UBIFS doesn't actually need - "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt) Fix a few bugs in the scatterlist code, add in-kernel tests for the now-fixed bugs and fix a leak in the test itself - "kdump: Enable LUKS-encrypted dump target support in ARM64 and PowerPC" (Coiby Xu) Enable support of the LUKS-encrypted device dump target on arm64 and powerpc - "ocfs2: consolidate extent list validation into block read callbacks" (Joseph Qi) Cleanup, simplify, and make more robust ocfs2's validation of extent list fields (Kernel test robot loves mounting corrupted fs images!) * tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits) ocfs2: validate group add input before caching ocfs2: validate bg_bits during freefrag scan ocfs2: fix listxattr handling when the buffer is full doc: watchdog: fix typos etc update Sean's email address ocfs2: use get_random_u32() where appropriate ocfs2: split transactions in dio completion to avoid credit exhaustion ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path() ocfs2: validate extent block list fields during block read ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec() ocfs2: validate dx_root extent list fields during block read ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY ocfs2: handle invalid dinode in ocfs2_group_extend .get_maintainer.ignore: add Askar ocfs2: validate bg_list extent bounds in discontig groups checkpatch: exclude forward declarations of const structs tools/accounting: handle truncated taskstats netlink messages taskstats: set version in TGID exit notifications ocfs2/heartbeat: fix slot mapping rollback leaks on error paths arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel ...

bpf: Pass bpf_verifier_env to JIT

2026-04-16T14:03:40+00:00

Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will use env->insn_aux_data in the JIT stage to detect indirect jump targets. Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c code without verifier, introduce helper __bpf_prog_select_runtime() to accept the env parameter. Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and switch to call __bpf_prog_select_runtime() in the verifier, with env variable passed. The original bpf_prog_select_runtime() is preserved for cbpf and lib/test_bpf.c, where env is NULL. Now all constants blinding calls are moved into the verifier, except the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted by bpf_patch_insn_data() function for normal cases, so there is no need to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it. Reviewed-by: Anton Protopopov # v8 Reviewed-by: Emil Tsalapatis # v12 Acked-by: Hengqi Chen # v14 Signed-off-by: Xu Kuohai Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com Signed-off-by: Alexei Starovoitov

bpf: Move constants blinding out of arch-specific JITs

2026-04-16T14:03:40+00:00

During the JIT stage, constants blinding rewrites instructions but only rewrites the private instruction copy of the JITed subprog, leaving the global env->prog->insnsi and env->insn_aux_data untouched. This causes a mismatch between subprog instructions and the global state, making it difficult to use the global data in the JIT. To avoid this mismatch, and given that all arch-specific JITs already support constants blinding, move it to the generic verifier code, and switch to rewrite the global env->prog->insnsi with the global states adjusted, as other rewrites in the verifier do. This removes the constants blinding calls in each JIT, which are largely duplicated code across architectures. Since constants blinding is only required for JIT, and there are two JIT entry functions, jit_subprogs() for BPF programs with multiple subprogs and bpf_prog_select_runtime() for programs with no subprogs, move the constants blinding invocation into these two functions. In the verifier path, bpf_patch_insn_data() is used to keep global verifier auxiliary data in sync with patched instructions. A key question is whether this global auxiliary data should be restored on the failure path. Besides instructions, bpf_patch_insn_data() adjusts: - prog->aux->poke_tab - env->insn_array_maps - env->subprog_info - env->insn_aux_data For prog->aux->poke_tab, it is only used by JIT or only meaningful after JIT succeeds, so it does not need to be restored on the failure path. For env->insn_array_maps, when JIT fails, programs using insn arrays are rejected by bpf_insn_array_ready() due to missing JIT addresses. Hence, env->insn_array_maps is only meaningful for JIT and does not need to be restored. For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON is not enabled, kernel falls back to interpreter. In this case, env->subprog_info is used to determine subprogram stack depth. So it must be restored on failure. For env->insn_aux_data, it is freed by clear_insn_aux_data() at the end of bpf_check(). Before freeing, clear_insn_aux_data() loops over env->insn_aux_data to release jump targets recorded in it. The loop uses env->prog->len as the array length, but this length no longer matches the actual size of the adjusted env->insn_aux_data array after constants blinding. To address it, a simple approach is to keep insn_aux_data as adjusted after failure, since it will be freed shortly, and record its actual size for the loop in clear_insn_aux_data(). But since clear_insn_aux_data() uses the same index to loop over both env->prog->insnsi and env->insn_aux_data, this approach results in incorrect index for the insnsi array. So an alternative approach is adopted: clone the original env->insn_aux_data before blinding and restore it after failure, similar to env->prog. For classic BPF programs, constants blinding works as before since it is still invoked from bpf_prog_select_runtime(). Reviewed-by: Anton Protopopov # v8 Reviewed-by: Hari Bathini # powerpc jit Reviewed-by: Pu Lehui # riscv jit Acked-by: Hengqi Chen # loongarch jit Signed-off-by: Xu Kuohai Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com Signed-off-by: Alexei Starovoitov

Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-04-15T21:41:21+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham P) - Enable AtomicOps only if we know the Root Port supports them (Gerd Bayer) - Don't enable AtomicOps for RCiEPs since none of them need Atomic Ops and we can't tell whether the Root Complex would support them (Gerd Bayer) - Leave Precision Time Measurement disabled until a driver enables it to avoid PCIe errors (Mika Westerberg) - Make pci_set_vga_state() fail if bridge doesn't support VGA routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return errors to vga_get() callers including userspace via /dev/vga_arbiter (Simon Richter) - Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3, rzg3s drivers (where the actual controller constraints are known), and remove validation from the generic OF DT accessor (Hans Zhang) - Remove pc110pad driver (no longer useful after 486 CPU support removed) and no_pci_devices() (pc110pad was the last user) (Dmitry Torokhov, Heiner Kallweit) Resource management: - Prevent assigning space to unimplemented bridge windows; previously we mistakenly assumed prefetchable window existed and assigned space and put a BAR there (Ahmed Naseef) - Avoid shrinking bridge windows to fit in the initial Root Port window; fixes one problem with devices with large BARs connected via switches, e.g., Thunderbolt (Ilpo Järvinen) - Pass full extent of empty space, not just the aligned space, to resource_alignf callback so free space before the requested alignment can be used (Ilpo Järvinen) - Place small resources before larger ones for better utilization of address space (Ilpo Järvinen) - Fix alignment calculation for resource size larger than align, e.g., bridge windows larger than the 1MB required alignment (Ilpo Järvinen) Reset: - Update slot handling so all ARI functions are treated as being in the same slot. They're all reset by Secondary Bus Reset, but previously drivers of ARI functions that appeared to be on a non-zero device weren't notified and fatal hardware errors could result (Keith Busch) - Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug events (Keith Busch) - Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by CXL because it has no effect (Vidya Sagar) - Avoid FLR for AMD NPU device, where it causes the device to hang (Lizhi Hou) Error handling: - Clear only error bits in PCIe Device Status to avoid accidentally clearing Emergency Power Reduction Detected (Shuai Xue) - Check for AER errors even in devices without drivers (Lukas Wunner) - Initialize ratelimit info so DPC and EDR paths log AER error information (Kuppuswamy Sathyanarayanan) Power control: - Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so generic pwrctrl driver can control it (Neil Armstrong) Hotplug: - Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core doesn't complain when setting brightness fails because the endpoint is gone (Richard Cheng) Peer-to-peer DMA: - Allow wildcards in list of host bridges that support peer-to-peer DMA between hierarchy domains and add all Google SoCs (Jacob Moroni) Endpoint framework: - Advertise dynamic inbound mapping support in pci-epf-test and update host pci_endpoint_test to skip doorbell testing if not advertised by endpoint (Koichiro Den) - Return 0, not remaining timeout, when MHI eDMA ops complete so mhi_ep_ring_add_element() doesn't interpret non-zero as failure (Daniel Hodges) - Remove vntb and ntb duplicate resource teardown that leads to oops when .allow_link() fails or .drop_link() is called (Koichiro Den) - Disable vntb delayed work before clearing BAR mappings and doorbells to avoid oops caused by doing the work after resources have been torn down (Koichiro Den) - Add a way to describe reserved subregions within BARs, e.g., platform-owned fixed register windows, and use it for the RK3588 BAR4 DMA ctrl window (Koichiro Den) - Add BAR_DISABLED for BARs that will never be available to an EPF driver, and change some BAR_RESERVED annotations to BAR_DISABLED (Niklas Cassel) - Add NTB .get_dma_dev() callback for cases where DMA API requires a different device, e.g., vNTB devices (Koichiro Den) - Add reserved region types for MSI-X Table and PBA so Endpoint controllers can them as describe hardware-owned regions in a BAR_RESERVED BAR (Manikanta Maddireddy) - Make Tegra194/234 BAR0 programmable and remove 1MB size limit (Manikanta Maddireddy) - Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED (Manikanta Maddireddy) - Add Tegra194 and Tegra234 device table entries to pci_endpoint_test (Manikanta Maddireddy) - Skip the BAR subrange selftest if there are not enough inbound window resources to run the test (Christian Bruel) New native PCIe controller drivers: - Add DT binding and driver for Andes QiLai SoC PCIe host controller (Randolph Lin) - Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang) Baikal T-1 PCIe controller driver: - Remove driver since it never quite became usable (Andy Shevchenko) Cadence PCIe controller driver: - Implement byte/word config reads with dword (32-bit) reads because some Cadence controllers don't support sub-dword accesses (Aksh Garg) CIX Sky1 PCIe controller driver: - Add 'power-domains' to DT binding for SCMI power domain (Gary Yang) Freescale i.MX6 PCIe controller driver: - Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard Zhu) - Delay instead of polling for L2/L3 Ready after PME_Turn_off when suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu) - Separate PERST# assertion (for resetting endpoints) from core reset (for resetting the RC itself) to prepare for new DTs with PERST# GPIO in per-Root Port nodes (Sherry Sun) - Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so MSI from downstream devices will work (Richard Zhu) - Fix i.MX95 reference clock source selection when internal refclk is used (Franz Schnyder) Freescale Layerscape PCIe controller driver: - Allow building as a removable module (Sascha Hauer) MediaTek PCIe Gen3 controller driver: - Use dev_err_probe() to simplify error paths and make deferred probe messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai) - Power off device if setup fails (Chen-Yu Tsai) - Integrate new pwrctrl API to enable power control for WiFi/BT adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai) NVIDIA Tegra194 PCIe controller driver: - Poll less aggressively and non-atomically for PME_TO_Ack during transition to L2 (Vidya Sagar) - Disable LTSSM after transition to Detect on surprise link down to stop toggling between Polling and Detect (Manikanta Maddireddy) - Don't force the device into the D0 state before L2 when suspending or shutting down the controller (Vidya Sagar) - Disable PERST# IRQ only in Endpoint mode because it's not registered in Root Port mode (Manikanta Maddireddy) - Handle 'nvidia,refclk-select' as optional (Vidya Sagar) - Disable direct speed change in Endpoint mode so link speed change is controlled by the host (Vidya Sagar) - Set LTR values before link up to avoid bogus LTR messages with 0 latency (Vidya Sagar) - Allow system suspend when the Endpoint link is down (Vidya Sagar) - Use DWC IP core version, not Tegra custom values, to avoid DWC core version check warnings (Manikanta Maddireddy) - Apply ECRC workaround to devices based on DesignWare 5.00a as well as 4.90a (Manikanta Maddireddy) - Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum (Vidya Sagar) - Delay post-PERST# cleanup until core is powered on to avoid CBB timeout (Manikanta Maddireddy) - Assert CLKREQ# so switches that forward it to their downstream side can bring up those links successfully (Vidya Sagar) - Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from any previous bad link state (Vidya Sagar) - Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA driver and Endpoint controller driver can share the interrupt line (Vidya Sagar) - Enable DMA interrupt to support DMA in both Root Port and Endpoint modes (Vidya Sagar) - Enable hardware link retraining after link goes down in Endpoint mode (Vidya Sagar) - Add DT binding and driver support for core clock monitoring (Vidya Sagar) Qualcomm PCIe controller driver: - Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since Qcom Root Ports support hotplug events like DL_Up/Down and can accept writes to Slot Control without delays between writes (Krishna Chaitanya Chundru) Renesas R-Car PCIe controller driver: - Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den) - Reduce EPC BAR alignment requirement to 4K (Koichiro Den) Renesas RZ/G3S PCIe controller driver: - Add RZ/G3E to DT binding and to driver (John Madieu) - Assert (not deassert) resets in probe error path (John Madieu) - Assert resets in suspend path in reverse order they were deasserted during probe (John Madieu) - Rework inbound window algorithm to prevent mapping more than intended region and enforce alignment on size, to prepare for RZ/G3E support (John Madieu) Rockchip DesignWare PCIe controller driver: - Add tracepoints for PCIe controller LTSSM transitions and link rate changes (Shawn Lin) - Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn Lin) SOPHGO PCIe controller driver: - Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that advertise support for them (Yao Zi) Synopsys DesignWare PCIe controller driver: - Continue with system suspend even if an Endpoint doesn't respond with PME_TO_Ack message (Manivannan Sadhasivam) - Set Endpoint MSI-X Table Size in the correct function of a multi-function device when configuring MSI-X, not in Function 0 (Aksh Garg) - Set Max Link Width and Max Link Speed for all functions of a multi-function device, not just Function 0 (Aksh Garg) - Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang) Miscellaneous: - Warn only once about invalid ACS kernel parameter format (Richard Cheng) - Suppress FW_BUG warning when writing sysfs 'numa_node' with the current value (Li RongQing) - Drop redundant 'depends on PCI' from Kconfig (Julian Braha)" * tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits) PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list PCI/P2PDMA: Allow wildcard Device IDs in host bridge list PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports PCI: tegra194: Add core monitor clock support dt-bindings: PCI: tegra194: Add monitor clock support PCI: tegra194: Enable hardware hot reset mode in Endpoint mode PCI: tegra194: Enable DMA interrupt PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode PCI: tegra194: Assert CLKREQ# explicitly by default PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on PCI: tegra194: Disable L1.2 capability of Tegra234 EP PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well PCI: tegra194: Use DWC IP core version PCI: tegra194: Free up Endpoint resources during remove() PCI: tegra194: Allow system suspend when the Endpoint link is not up PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode PCI: tegra194: Disable direct speed change for Endpoint mode PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" ...

Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-04-15T19:59:16+00:00

Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ...

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-04-15T01:36:10+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Support HW queue leasing, allowing containers to be granted access to HW queues for zero-copy operations and AF_XDP - Number of code moves to help the compiler with inlining. Avoid output arguments for returning drop reason where possible - Rework drop handling within qdiscs to include more metadata about the reason and dropping qdisc in the tracepoints - Remove the rtnl_lock use from IP Multicast Routing - Pack size information into the Rx Flow Steering table pointer itself. This allows making the table itself a flat array of u32s, thus making the table allocation size a power of two - Report TCP delayed ack timer information via socket diag - Add ip_local_port_step_width sysctl to allow distributing the randomly selected ports more evenly throughout the allowed space - Add support for per-route tunsrc in IPv6 segment routing - Start work of switching sockopt handling to iov_iter - Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid buffer size drifting up - Support MSG_EOR in MPTCP - Add stp_mode attribute to the bridge driver for STP mode selection. This addresses concerns about call_usermodehelper() usage - Remove UDP-Lite support (as announced in 2023) - Remove support for building IPv6 as a module. Remove the now unnecessary function calling indirection Cross-tree stuff: - Move Michael MIC code from generic crypto into wireless, it's considered insecure but some WiFi networks still need it Netfilter: - Switch nft_fib_ipv6 module to no longer need temporary dst_entry object allocations by using fib6_lookup() + RCU. Florian W reports this gets us ~13% higher packet rate - Convert IPVS's global __ip_vs_mutex to per-net service_mutex and switch the service tables to be per-net. Convert some code that walks the service lists to use RCU instead of the service_mutex - Add more opinionated input validation to lower security exposure - Make IPVS hash tables to be per-netns and resizable Wireless: - Finished assoc frame encryption/EPPKE/802.1X-over-auth - Radar detection improvements - Add 6 GHz incumbent signal detection APIs - Multi-link support for FILS, probe response templates and client probing - New APIs and mac80211 support for NAN (Neighbor Aware Networking, aka Wi-Fi Aware) so less work must be in firmware Driver API: - Add numerical ID for devlink instances (to avoid having to create fake bus/device pairs just to have an ID). Support shared devlink instances which span multiple PFs - Add standard counters for reporting pause storm events (implement in mlx5 and fbnic) - Add configuration API for completion writeback buffering (implement in mana) - Support driver-initiated change of RSS context sizes - Support DPLL monitoring input frequency (implement in zl3073x) - Support per-port resources in devlink (implement in mlx5) Misc: - Expand the YAML spec for Netfilter Drivers - Software: - macvlan: support multicast rx for bridge ports with shared source MAC address - team: decouple receive and transmit enablement for IEEE 802.3ad LACP "independent control" - Ethernet high-speed NICs: - nVidia/Mellanox: - support high order pages in zero-copy mode (for payload coalescing) - support multiple packets in a page (for systems with 64kB pages) - Broadcom 25-400GE (bnxt): - implement XDP RSS hash metadata extraction - add software fallback for UDP GSO, lowering the IOMMU cost - Broadcom 800GE (bnge): - add link status and configuration handling - add various HW and SW statistics - Marvell/Cavium: - NPC HW block support for cn20k - Huawei (hinic3): - add mailbox / control queue - add rx VLAN offload - add driver info and link management - Ethernet NICs: - Marvell/Aquantia: - support reading SFP module info on some AQC100 cards - Realtek PCI (r8169): - add support for RTL8125cp - Realtek USB (r8152): - support for the RTL8157 5Gbit chip - add 2500baseT EEE status/configuration support - Ethernet NICs embedded and off-the-shelf IP: - Synopsys (stmmac): - cleanup and reorganize SerDes handling and PCS support - cleanup descriptor handling and per-platform data - cleanup and consolidate MDIO defines and handling - shrink driver memory use for internal structures - improve Tx IRQ coalescing - improve TCP segmentation handling - add support for Spacemit K3 - Cadence (macb): - support PHYs that have inband autoneg disabled with GEM - support IEEE 802.3az EEE - rework usrio capabilities and handling - AMD (xgbe): - improve power management for S0i3 - improve TX resilience for link-down handling - Virtual: - Google cloud vNIC: - support larger ring sizes in DQO-QPL mode - improve HW-GRO handling - support UDP GSO for DQO format - PCIe NTB: - support queue count configuration - Ethernet PHYs: - automatically disable PHY autonomous EEE if MAC is in charge - Broadcom: - add BCM84891/BCM84892 support - Micrel: - support for LAN9645X internal PHY - Realtek: - add RTL8224 pair order support - support PHY LEDs on RTL8211F-VD - support spread spectrum clocking (SSC) - Maxlinear: - add PHY-level statistics via ethtool - Ethernet switches: - Maxlinear (mxl862xx): - support for bridge offloading - support for VLANs - support driver statistics - Bluetooth: - large number of fixes and new device IDs - Mediatek: - support MT6639 (MT7927) - support MT7902 SDIO - WiFi: - Intel (iwlwifi): - UNII-9 and continuing UHR work - MediaTek (mt76): - mt7996/mt7925 MLO fixes/improvements - mt7996 NPU support (HW eth/wifi traffic offload) - Qualcomm (ath12k): - monitor mode support on IPQ5332 - basic hwmon temperature reporting - support IPQ5424 - Realtek: - add USB RX aggregation to improve performance - add USB TX flow control by tracking in-flight URBs - Cellular: - IPA v5.2 support" * tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits) net: pse-pd: fix kernel-doc function name for pse_control_find_by_id() wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit wireguard: allowedips: remove redundant space tools: ynl: add sample for wireguard wireguard: allowedips: Use kfree_rcu() instead of call_rcu() MAINTAINERS: Add netkit selftest files selftests/net: Add additional test coverage in nk_qlease selftests/net: Split netdevsim tests from HW tests in nk_qlease tools/ynl: Make YnlFamily closeable as a context manager net: airoha: Add missing PPE configurations in airoha_ppe_hw_init() net: airoha: Fix VIP configuration for AN7583 SoC net: caif: clear client service pointer on teardown net: strparser: fix skb_head leak in strp_abort_strp() net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete() selftests/bpf: add test for xdp_master_redirect with bond not up net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration sctp: disable BH before calling udp_tunnel_xmit_skb() sctp: fix missing encap_port propagation for GSO fragments net: airoha: Rely on net_device pointer in ETS callbacks ...

Merge tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2026-04-15T00:10:15+00:00

Pull powerpc updates from Madhavan Srinivasan: - powerpc support for huge pfnmaps - Cleanups to use masked user access - Rework pnv_ioda_pick_m64_pe() to use better bitmap API - Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC - Backup region offset update to eflcorehdr - Fixes for wii/ps3 platform - Implement JIT support for private stack in powerpc - Implement JIT support for fsession in powerpc64 trampoline - Add support for instruction array and indirect jump in powerpc - Misc selftest fixes and cleanups Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal, Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni, Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap, Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote, and Yury Norov (NVIDIA) * tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits) mailmap: Add entry for Andrew Donnellan powerpc32/bpf: fix loading fsession func metadata using PPC_LI32 selftest/bpf: Enable gotox tests for powerpc64 powerpc64/bpf: Add support for indirect jump selftest/bpf: Enable instruction array test for powerpc powerpc/bpf: Add support for instruction array powerpc32/bpf: Add fsession support powerpc64/bpf: Implement fsession support selftests/bpf: Enable private stack tests for powerpc64 powerpc64/bpf: Implement JIT support for private stack powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe() powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe() powerpc/net: Inline checksum wrappers and convert to scoped user access powerpc/sstep: Convert to scoped user access powerpc/align: Convert emulate_spe() to scoped user access powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access powerpc/futex: Use masked user access powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC cpuidle: powerpc: avoid double clear when breaking snooze powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings ...